TIG Welding Aluminum Part 3: Puddle Control Tips

[@robtennant3689]

That was very helpful in demonstrating and explaining how the pedal is to be modulated along with travel speed. Never heard the car-running-downhill analogy before, and it helped me big time to understand the task at hand. Thanks!!!

[@Mk18T]

Great tips there. I have watched this video several times now and have just realised why my puddle was going so out of control. So many test runs on the same work piece = very hot = out of control puddle! Simples!

[@spelunkerd]

Excellent demo. I love that analogy of a car rolling downhill. With MIG, there's no accelerator without stopping, so we usually just drive a little faster as the metal heats up (not ideal because wire speed is not adjustable in real time while on the piece).

[@MillerWelders]

Hi @varmdal Let us know the type and thickness of materials you are welding with. That will go a long way in determining how to help you set your machine. In the meantime, check out the many TIG how-to resources on our website. Thanks!

[@LowLightVideos]

Instead of going to the next piece because the metal was now very hot another idea would have been to turn the metal 90' and practice what to do at the end of the piece (as discussed @ 0:48 ).so you can do the entire _next_ piece from beginning to end. These Videos are helpful for beginners and so the rest of us do not have to look at crap. I would like to see more of these including much more advanced Videos. More Dynasty and Aerowave is always welcome; Aerowave (which I have used) starts and end so nicely. Thanks for making this Video.

[@djwaglmuffin]

Learning the weld puddle first is a great idea. Going to try that today. I'm having so much trouble with aluminum. :(

[@TheBoilermakerno1]

At last a demo from someone who is left handed like myself

[@WizzRacing]

@TheBoilermakerno1 I learned to weld left handed, So I could see the weld better. It makes push or pull welding to me seem easier to control. It must have helped when I took the single pass test 1/4" grooved aluminum. To get FAA certified many years ago and passed the first time. I was so damn worried about the aluminum test, I almost failed the stainless steel 8% for every 12"

[@aspenbanjo]

Where did he get that great table? I'd like one like that...

[@M1ST3RHYDE]

im not new to welding but I have yet to weld aluminium via TIG, I over heat the tung tip till it melts so if you could be so kind Would you tell me what im doing wrong: is it a combo of the amps & gap too much? I know its almost imposiblr to answer without seeing me do it but what gaps and amps did you use in this case.

[@aspirezone8047]

Please answer, which recommended apms and ac balance in 2mm thickness without filler

[@MillerWelders]

Hello Aspire. Thank you for reaching out! We recommend calling in and speaking with a sales technician for assistance in choosing the right process for your machine's needs. There are a lot of determining factors. The number is 920-734-9821. If there is anything else we can help with, just let us know.

[@SavageInsight]

With a really good weld, is the strength of the weld basically the same as if the two pieces of metal were forged together, or is it weaker, etc. ?

[@MillerWelders]

The ideal weld should be the same strength as the base material itself, if not stronger. If it's weaker, that weld won't pass inspection. Could be a number of things causing problems with a given weld.

[@jtschid0910]

So i should not create half moons or move in a circular motion as I would with a wire feed set up?

[@varmdal]

How much power should i use? and ive heard something that you have to switch the power from Ac to dc? but i dont know ... please help ^^

[@ansonwilson]

@smok1n You sound awesome.

[@Ranar_equipment]

cool

[@DieHarderAgain]

why arent you brushing/cleaning the aulminum before welding?

[@wegsixnine]

DieHarderAgain because its a demo...

[@UltimateTechGuru]

here is one marketing manager who knows what stuff he is trying to sell.... not seen anyone like him..

[@funtelaAaA]

i am TIG welder....from bulgaria. can someone tell me, how can i find a job in usa like welder. cuz my country cant give me a chance to grow up and show my all skills. i want to work for country who can give me that chance to show my skills. and to help me learn a lot of new welding tips.

[@MillerWelders]

+plamen georgiev Thank you for your interest in Miller Welders. If you are looking for employment, check out the following link to view current openings at Miller: www.millerwelds.com/en/about/careers. Please let us know if you have any other questions.

[@funtelaAaA]

Miller Welders the problem for me is that I'm not from USA. I corresponded with a gentleman who told me that it would be difficult to find a job through the Internet and it would be difficult to give me a visa, but still do not want to give up .We have any chance to get a job through the Internet do not know please for help because my country does not allow me develop and improve my skills. I have another year to complete their higher education ship machines and mechanisms .and I want to finish it in the country that can give me a realization then. i hope my english is not too bad.

[@funtelaAaA]

Miller Welders

[@mindspankcowboy]

fitter

[@mindspankcowboy]

try to get into the united association, canada, australia, usa, pipefitter, boilermaker