TIG Welding Aluminum W/ Harbor Freight Titanium 200

Рет қаралды 35,564

Күн бұрын

Going over your first Alum TIG weld project.
Yep, all the welds preformed in this video were done with the cheap Harbor Fright Titanium TIG 200. With that I'll show you what setups the pros use.
TIG welding 101 Basics video here: • TIG Welding Made Easy
As always I throw in some tips and tricks to get those good looking welds.
*Items Used*
3/32 Chartreuse Tungsten: amzn.to/49FFooG
3/32” ER4043 Filler Rod: amzn.to/3Hrj99m
Argon Regulator: amzn.to/49qxsHJ
100% Argon Gas: amzn.to/3snecKD
Stubby Gas Kit for size 17/18/26 Torch: amzn.to/3QXZdk5
Stubby Gas Kit for size 9/20/25 Torch: amzn.to/3QrhjJK
HF Titanium TIG 200: www.harborfrei...
Another Great Options that I Have is the ArcCapatin TIG00:
www.arccaptain...
Code: mechmaster
Other Welding Supplies:
Nozzle Gel: amzn.to/351bxuC
Anti Spatter Spray: amzn.to/3WzXH8w
Welpers/ Mig pliers: amzn.to/37CAxco
Welding Gloves: amzn.to/3trCEIt
Magnets: amzn.to/3wn9vA2
Clamps: amzn.to/3uhLms2
Wire Wheel Brush: amzn.to/3tqDAgg
amzn.to/37GN6mZ
#diy #welder #toolreview #tigweld #tigwelding #tigwelder #harborfreighttools

Пікірлер: 26

@tedbastwock3810 8 ай бұрын

Really loving this TIG intro series, hope it continues. Great TIG AL intro here, thanks!

@-DIYPRO- 8 ай бұрын

Thanks!

@paulholmes672 9 ай бұрын

Thanks for showing off welding with Harbor Freight equipment. I'd like to do (learn?) some homestead welding, at least steel and maybe some aluminum, but on a fixed income, HF is better than nothing. Saying what it can do is much better than telling what it can't do. Again, Thank You!!!

@-DIYPRO- 8 ай бұрын

Right on, thanks!

@ebayollis 6 ай бұрын

Straight foward and to the point...i love it

@-DIYPRO- 6 ай бұрын

Right on, thanks!

@-DIYPRO- 9 ай бұрын

Happy Welding!

@SmokyRibsBBQ 7 ай бұрын

What size breaker and circuit does this machine require? 30 amp? 40 amp? Thinking of getting this machine but I have to run a dedicated receptacle first.

@-DIYPRO- 7 ай бұрын

I have mine hooked up to a 230v 30amp breaker. Haven't tripped it yet, I haven't had to max it out either. Biggest project was 1/8 sq. Tubing, like in the video but it was a big cart, kept it at 150 as amps most of the time.

@SmokyRibsBBQ 7 ай бұрын

@@-DIYPRO- Ok good deal! Thanks for the reply. I have to install a breaker and run wiring, so I might as well step up to 40 amp just to know I won't have any issues.

@RebelLifeFilmsDjDaBeyCEO 4 ай бұрын

Great video… just bought this welder…..you explained everything in detail and got straight to the point

@mplscarsales6652 9 ай бұрын

More of the Titanium unlimited 200 multiprocess welder use I just bought this and would like more how to use it ,were to have the setting ect ! Thanks

@-DIYPRO- 8 ай бұрын

Right on!

@coltensawyer6761 Ай бұрын

For a beginner to learn, and my eventual goal is to weld on thin aluminum Jon boats would you recommend this unit or a prime weld 225? Thanks !!

@-DIYPRO- Ай бұрын

I would get the Prime Weld. It will take longer to get the settings dialed down but overall it's a great machine.

@seanyounk1 5 ай бұрын

Thank you for sharing. Other than being cheaper, How does the Titatnium 200 at $899.99 AC welder stack up against the AHP Alpha Tig203Xi for $650, the Eastwood Elite 200 for $1199, PrimeWeld TIG325X for $1,399, or the Everlast Powertig 210EXT for $1469? Are there any other top competitors under $1,500?

@-DIYPRO- 5 ай бұрын

Haven't had the Alpha or Eastwood but I have had, and really liked the Primeweld 225. Yes I would rather have that one than the Titanium. Another that is comparable in price to the titanium would be the ArcCaptain TIG 200. They are the only ones I have a discount code for so if you decide with them, go here: www.arccaptain.com/?ref=mechmaster Code: mechmaster

@doug2202 4 ай бұрын

Will the HF tig do anodized aluminum pipe. I need to do repairs on a boat T Top and also build some rod racks. Curious if this welder will do the trick