"Tiger/Koi" cutting board / butcher block. A gift from a brother to a brother. Making process.

How to find inlay parameters.
👉👉👉 broinwood.com/...
CNC files: broinwood.com/...
My Go-To Tools and Supplies.
amzn.to/42tZlOl
For orders go to broinwood.com/...
Check out our Instagram page / broinwood
broinwood.com/
email: [e-mail] How to find inlay parameters.
broinwood.com/...
The board size is 23.5*19.5*3 inch. wood (walnut, maple, dark cherry, light cherry, osage orange)
broinwood.com/
If you want a custom board please email us [e-mail]
For orders go to broinwood.com/...
Check out our instagram page / broinwood
The outstanding design made by our teammate Bohdan,
check out his IG page @petrushko_bohdan
/ @bogdanpetrushko3425
/ boordon.design
[e-mail] (if you need a custom illustration, please contact him)
Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
My Random Orbit Sanders I love how they work but they get a little dusty:
amzn.to/36u5mxs
amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
amzn.to/33uGmnS
My Sanding Disc (for me they are the best!!!):
3M Cubitron II
amzn.to/2SrnAHs (80 and 120 grit)
amzn.to/2SqlvvH (150 grit)
amzn.to/3nksyUQ (220 grit)
amzn.to/2GriKaZ (320 grit)
My router bits which I use a lot:
My favorite router bit!!!:
2D & 3D Carving 12.4 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64
amzn.to/3sviUAl (clean cut, long life, definitely recommend)
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
amzn.to/3izKXcF
15 Degree v bit (be careful easy to break down)
amzn.to/3izLyLr
Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
amzn.to/2SsZYlV (I use it for juice groove)
1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
amzn.to/33v99Zm (I use it for juice groove)
Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
amzn.to/2SsB8m7
Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)
Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)
My Collet Set:
amzn.to/33xbO4X
My DEWALT Plate Joiner:
amzn.to/33xtkWQ (it is not bad and not good it is ok)
My Bandsaw Blade it is inexpensive and cut well:
amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel, where you can see my woodworking: cutting boards with inlay from different types of wood, wood maps, key hangers and more. I often use CNC machine for my works, I love using it. I’m going to share my videos every week.
Thank you for visiting my channel. I appreciate your likes and subscriptions!
Sincerely,
Nik.

[@Broinwood]

How to find inlay parameters. broinwood.com/products/how-i-am-finding-inlay-parameters

[@calebsanz9826]

This guy is absolutely amazing. I don’t understand how he’s able to get the detail he does without the wood breaking. On both the male and female. I do inlays often and I have not been able to decode this witchcraft. I’ve tried edge and endgrain. He’s a true master

[@MedeniFilm]

Lep umetnički rad na ovoj mašini... Bravo !

[@lastditch727]

Wow that looks amaze

[@JohnColgan.]

It's so relaxing watching this piece together, there are some that would DIS this as Just Pressing Buttons, but it's Contemporary Art, beautiful & amazing to watch. Congratulations as always 1000%

[@JohnColgan.]

Wow, just saw double inlay on the roses, so delicate & prominent, I was hoping to see this style, as well as the firey stripes on the tiger segment, out if this world

[@dietergerstmann]

You are a great wooden artist. I really like your work very much.

[@ЕленаДомнич-ф6н]

Великолепная работа, это уже произведение искусства

[@edmuff82]

Amazing as always, would love it if you made a video on the CAD/CAM work behind these amazing board.

[@carsoncolegate6798]

Brilliant stuff again Nik!

[@saschametzger8651]

Sehr schöne arbeit sieht sehr toll aus. Weiter so. Ich könnte da stundenlang zuschauen. Ganz ganz schön.

[@DipStix666]

Awesome Work !! Really enjoy watching your videos....That is Huge!

[@devistroncon6042]

Beautiful. I stay always without words.

[@1kmlarose]

Nik, I absolutely think your work is amazing. You are by far, above and beyond, the best inlay artist I have seen. I am so impressed with your talent and amazing boards you produce. It appears you use an Axiom AR8 V5 CNC, i hope that's correct. If so, your waste board you made for your table top, do you by chance have the file for that? If so, would you be willing to share it or sell it? I think it is the best waste board I've seen. I am new to CNC machining and just recently purchased an Axiom AR8 V5 24x48 and would love to have something like that for my machine.

[@damson2809]

🐐 is back

[@MrSoleeno]

Mind blowing! 👌🏼🤯♥️♥️

[@noeljshah1]

Wonderful just wonderful. ❤️👍

[@jefferyatkisson7781]

Absolutely stunning! I hope someday my inlays are nearly as good as yours !

[@psi23k]

Beautiful work. Love it 👌😍

[@NicoSpyro]

As usual, an other masterpiece....

[@katiestrauss7449]

So do you draw with the cutter, or like draw it on the computer and then it does it?

[@zofo264]

It's the Eye of the Tiger!...you know the rest.

[@richardvang7228]

Broinwood, Will you ever make a video on your CNC setup?

[@JohnColgan.]

Occasionally, some pieces of your end grain block meet as perfect matchbook effect. Have you ever thought of deliberately aligning blocks to make paired or 2x2 matchbook, I think it will give a fabulous background effect to the foreground inlay image! Another thought, CNC trimming the inlay flush will leave a tell tale mark in the lighter inlay. Sometimes a circular trim cut would leave a complimentary tell tale pattern.

[@lazylathe]

Another absolute stunner!! How much do one of these boards weigh?

[@Broinwood]

Thank you! about 18 kg or 39lb.

[@iamwangine8752]

Man ... 4 dislikes for such a hard and beautiful work . How is possible ? // Pure art , u got sub and like.

[@viktorshvarz]

Аплодирую стоя мастеру!👍💪🔥

[@RecuRecording]

Master piece

[@АлексБыстров-ч5п]

Very beautiful✨

[@FamilyRoots]

So beautiful ❤️ 👍

[@PSS_1]

why don't you use larger cutter diameters for planning? they are special for wood

[@bpushkin3457]

Amazing work! Broinwood, Will you ever make a video how you do on fusion 360 ( you mention before you using this program )

[@pilsburypie1977]

Do you just hammer your inlays in or place the work in a press or clamps after? Always love your videos and boards.

[@Notjay95]

Do you just run the 12 degree tapered ball on center or do you use an engrave feature on your software?

[@chriscarpenter4415]

That is very beautiful. I hate to know how much that was.

[@badpioner]

Лайк не глядя братан! Great job!

[@motownmitch31]

How do you get such clear images to use?

[@1990DomDom]

What two woods do you use the most? What v bit are you using? Are you using mach3 and vetric? What’s your flat depth of the female and What’s your start and flat depth for the male? Thanks in advanced

[@dawnbigwarfe6871]

What is your carve depth and inlay stock depth

[@bogdanpetrushko3425]

Amazing as usually )

[@girliegal440]

Again...who is going to use this as an actual cutting board? It's too beautiful.

[@kevintamaki]

I would. Wtf that's like getting a Ferrari and never driving it.

[@mountaineerwoodworks2890]

Why did you cover up the Axiom logo?

[@henrywinterbottomii3613]

Awesome as always. Would you mind sharing the brand and model of the CNC machine you are using?

[@WallyJ2K]

What kind of CNC is that?

[@Dan-xr4ue]

Will you ever do a tutorial that shows start to finish on the entire process? I would greatly appreciate it. I would even pay for the tutorial.

[@kikladiki]

ITS AMAZING...I wonder how much do you charge for this kind of stuff?

[@daviddiehl197]

Not enough.

[@danielsmullen3223]

Beautiful work. Do you clamp small pieces like the canarywood for the bee or do you just hammer it in?

[@SomeDudeInFl]

I have the exact same question

[@sarunasdapkus3994]

hola , que madera blanca utiliza ?

[@woodartsdesing9964]

Excellent job! What type wood you used in this project? 10/10 nice

[@adamdodski3627]

He always puts that in the description.

[@trojanman22]

Why not use a bigger flattening bit??

[@craigsayer8710]

Lovley board whens mine coming out m8

[@vladyerus]

On your collet set, how is the runout of any? Do you notice any issues? I was considering that same set

[@Ideaprodukte]

Great work - like every time ;-) What is the approx. milling time for this design? I guess arround eight hours.

[@DawnDBoyerPhD]

Wow

[@Basteleddie]

Просто Класс! Красотища!!!!

[@joekraft4539]

Amazing work. Can you or anybody else tell where to find a 15 degree vbit all I can find is 15 degree ball nose. Thanks

[@briandarroch5018]

He uses the Amanda 45611-k 15 degree but (amazing bit - use it myself) check out Amazon - it’s just shy of $40 and pretty much last forever as long as it does not crash into something killing the tip) -Bluetick Woodworks

[@joekraft4539]

@@briandarroch5018 Thanks I will try one

[@Almost_Baked]

@@briandarroch5018 yep, I use the same bit!

[@leodalion8263]

Thanks for watching.....zeeez, thanks for making

[@nelsondonizetti]

Moro no Brasil e tenho bastante madeira boas ideal para este tipo de trabalho.

[@scubapro2689]

What do you charge for a block like this? General ballpark...

[@JohnColgan.]

Never mind the cost, Better question would be, How Soon can you build me one ?

[@Modiward]

How much this board please?

[@mrSanders.]

сколько времени уходит на полный цикл?

[@Trumppower]

How much?

[@daviddiehl197]

Too nice, I'd never use it. Put it on the wall instead.

[@jonnaleadford9732]

The craft of woodworking looses a great deal when all he does is speed flu, change router and drill bits, and blow sawdust so his camera can provide a better vid clip. The expensive toy he’s using is the master craftsman.