At 21:59 the door is closed and the tile goes under the door and in that respect if you are on the other side of the door in the opposite room you will be seeing the tile protruding into the room. At 25:28 you can clearly see how the tile protrudes into the next room and with the door closed you will be able to see this tile. Unless the same tiles are going to be laid next door as well and butt up to these tiles then that's fine but if its a different floor material like carpet or wood then from the room with the other floor material in you should not be able to see the tile protruding you would have a suitable Threshold strip between the two floor materials but you shouldn't be able to see the threshold strip if it's fitted in the correct position directly under the door. The same goes if you are in the room with tiles you shouldn't be able to see the threshold strip or the other floor be it wood or carpet from the tiled room. Just a minor detail, I know, so don't shoot me.
@MrandMrsDIYАй бұрын
We build sets to shoot a number of different videos, its to a real house!
@kenhynes71352 жыл бұрын
No back putter on tiles why don’t you clean the the edges of tiles before putting in the clips so the adhesive doesn’t come up on the joints
@CtOlaf Жыл бұрын
The real questions here!
@bills1995vette4 ай бұрын
He mentioned it at the beginning as an “option”.
@IHFM20242 ай бұрын
You don't always have to back butter tiles. That's just an American obsession. And when you take the clips out the following day the adhesive is still fresh enough to remove with a blade and wet sponge.
@davidallton8074 Жыл бұрын
I always cut the Architrave so that the tiles fit under it.
@George.Coleman16 күн бұрын
Just a tip, with rectangle tiles you can get away with using only 1 leveling clip and wedge on the short sides meaning less work. Also a pencil works great for clearing tile adhesive from your lines before it sets so that your grout shows instead, keeping colour uniform
@OdXUK10 ай бұрын
Really good video. I'm a very experienced DIYer but watching this has given me a couple of things to think about as I embark upon a complete floor replacement of my Spanish villa. Cheers!
@MrandMrsDIYАй бұрын
Many thanks
@annakalnina44653 ай бұрын
great video Craig you are a legend. BB1 what a legend!
@MrandMrsDIYАй бұрын
Many thanks
@richardbowen3711 Жыл бұрын
Don't need the applicator just do it by hand. As a tiler I only started using these systems about 3 months ago always just used normal spacers. This just makes it a little easier. Make sure to clean the adhesive out of the lines before putting the clips in saves you a job later. Also use normal spacers still as the clips arnt 💯 so cover yourself by using spacers aswell.
@MrandMrsDIYАй бұрын
Good tip thanks
@truthseekerreal1 Жыл бұрын
It ius best practise to remove excess adhesive from around eact tile prior to llaying the next tile.this practise also prevents the grout opening being filled with adhesive keeping the tile clean
@MrandMrsDIYАй бұрын
Good tip thanks
@MosquitoMna11 ай бұрын
Why you not skimming off a thin layer of the thin set on the edge of the tile before placing the clips for the second tile? And why no back buttering of the tiles?
@fernandesrichemond8307 ай бұрын
It's not necessary to back buttering tiles if you have enough thin set on the floor
@marcopoulin18977 ай бұрын
Amateure answer look like you dont know how instale tile @@fernandesrichemond830
@MrandMrsDIYАй бұрын
Its not always required on tiles this size,
@Jake-u2o Жыл бұрын
I notice you don`t apply adhesive to the back of the tile like I have seen before ??? Is this really not necessary ??? Thanx...
@MrandMrsDIYАй бұрын
Not is much on time this size
@philip1771007 ай бұрын
Back butter & thin set should be parallel to the short side of the tile so air can escape. Integrity & Strength could be compromised.
@MrandMrsDIYАй бұрын
Thats right
@christinegenc3929Күн бұрын
I think I put toooo much Adhesive under the tiles, I put the adhesive on the Concrete floor and on the back of the tile and now they are moving after two days. Would it be the cold weather that is making it take so long to dry? 😢
@gistobusang7298 ай бұрын
Nice video indeed, but myself I usually start my floor tile in the centre of the house 🏠, coz most of the time this houses are not straight...
@indyB20 күн бұрын
Hi, Would you need a tile levelling system for tiles that measure 20 x 20cm? If so, is the wedge type the best to use? Thanks.
@felipegrille8082 Жыл бұрын
Brother. I generally just pull the pins off the hinges. When removing doors.. but hey that's just me
@felipegrille8082 Жыл бұрын
And you can cut the door jambs with a jam saw or a grinder or Dremel or hacksaw and it would eliminate the cardboard template etc etc etc and it looks better
@MrandMrsDIYАй бұрын
Thats right
@Hewbuntu8 ай бұрын
Hi Craig and TM, this is the best video I have found on this. Very helpful, thanks :)
@MrandMrsDIYАй бұрын
Mnay thanks
@sandrascotland68365 ай бұрын
What is the name of the sealsnt please.
@felipegrille8082 Жыл бұрын
Unless you're not working by piece work if you charging by the hour I definitely recommend cardboard template
@marcopoulin1897 Жыл бұрын
Well template for amateur
@DivyeshPatel-s9wАй бұрын
Thank you for the video! How much thickness(height) of adhesive should I keep for the following; - Adhesive thickness for laying insulation boards? - Latex thickness after laying underfloor heating mat? - Adhesive thickness for laying 10mm tiles?
@walkervx80038 ай бұрын
Learnt so much for this video , will you need an apprentice , i would like to wirk with you and learn more
@MrandMrsDIYАй бұрын
Glad you leant from it. thats why we do these videos,
@truthseekerreal1 Жыл бұрын
It is cleaner to place an off-cut of tile close to the moulding useing it as a height guide and cut out the excess moulding allowing the tile to be fitted under the moulding.
@MrandMrsDIYАй бұрын
Thats right it works well
@setp123723 күн бұрын
How to control the thickness of tiles?
@rednissan001 Жыл бұрын
What do you do other side of the door where the floor level is much lower??
@sajidrafique3757 ай бұрын
Eat your heart out 😹😹
@marcopoulin189710 ай бұрын
This video is shame for real tile setter
@nattiemania3 ай бұрын
Why? I have seen big hotel project that did similar style
@marcopoulin18972 ай бұрын
Floor gone crack this guy is joke
@davidsbusisonsele36574 ай бұрын
IF you are going to install 300 x 300 tiles, do you use one installation method and are the spaces you leave not many of the usual small ones?
@franklinanderson73894 ай бұрын
How come you put that tidy piece next to the wall? I would've been fired for that.
@ramano57610 күн бұрын
I'm about to tile for the 1st time very educational thanks mate🙏
@andrewreigns75226 ай бұрын
Great presentation🎉
@MrandMrsDIYАй бұрын
Cheers
@Jamie-gq3sv5 ай бұрын
Why put a small cut in.. why not have the larger cut looks better?
@Sirricardo64 ай бұрын
Hii, What are the guidelines for needing to back butter the tiles?
@hobby-photo4 ай бұрын
Hát ez elég amatőr munka.Kijött a ragasztó a széleknél
@matachevali395 Жыл бұрын
What leveling system can use if tiles have small stones texture, wich are uneven, is not a plane surface!
@SmilingFlamingoBirds-jj6yj6 ай бұрын
Very helpful indeed
@MrandMrsDIYАй бұрын
Cheers, glad out helpful
@oneway60544 ай бұрын
need to apply thinset paralell to shortest side
@mitchelledwards8708 Жыл бұрын
What’s the minimum bed size for a floor tile pal? Struggling for bight on a external door
@mitchellkuharski57354 ай бұрын
I didn’t know you could paint the sealer on the whole floor.. just sealing the grout lines is a pain .. thanks for the video.. entertaining 👍
@MrandMrsDIYАй бұрын
Yes certainly
@oddopops1327 Жыл бұрын
👍👍😊
@eribertojrcabanada58524 ай бұрын
What is the size of spacer you use?
@zahazaha3898 Жыл бұрын
Hi mountain! I don’t suppose you could help me with a set out for my tiles? I am am struggling to work out how to do it as it goes up my entrance hall and then into the dining room?
@coventrypunx10149 ай бұрын
Plan it out
@sddfdsfdsf4 ай бұрын
im about to remove my old ceramic from my wall to put on a new one. Do i need to remove ALL the old concrete on the wall so that new concrete can be put on? Or can i just put new ceramic on old concrete walls?
@shubceee3 ай бұрын
For my balcony I have removed all the concrete as much as I could. Idk if you can just leave it
@marcopoulin18972 ай бұрын
Put on top
@neo_26510 ай бұрын
Great detailed guide….thanks.
@MrandMrsDIYАй бұрын
Thank you
@samblake878 ай бұрын
Good video, off I go to tile the new bathroom!
@MrandMrsDIYАй бұрын
Thats the spirt
@MrandMrsDIYАй бұрын
How did you get on
@samblake87Ай бұрын
All good thank you - both walls and floor done using this video. One tile is a tiny bit lose, it’s not perfect upon close inspection but hey it was my first time and the labour was FREE!
@re_patel2 жыл бұрын
Is the floor concrete?
@MrandMrsDIY Жыл бұрын
No, it was a wooden floor that had cement boards applied first so that it could be tiled over
@coventrypunx10149 ай бұрын
Watch the video again
@JagHiroshi6 ай бұрын
Really informative, thank you.
@MrandMrsDIYАй бұрын
Your Welcome
@csrboltfan2643 Жыл бұрын
A "roober" mallet ?
@yeoGlover Жыл бұрын
You'll be lucky to have 50% coverage under those tiles, them with the waffled backs need to be back buttered. Not a great advert for tile Mountain to be honest.
@marcopoulin1897 Жыл бұрын
Right he is not tile setter just pretend to be what mess
@mickymac6571 Жыл бұрын
Im not a tiler but he did say you can butter the back of the tiles if you want to.
@marcopoulin1897 Жыл бұрын
Already fail
@coventrypunx10149 ай бұрын
Should start with a full tile against a while either
@aleksandrguas85804 ай бұрын
Where is the Guide line you are following with the tiles.How do you know is a perfect straight line ?All looks good , but you did not checked that.