Tilta Remote Control Handle for DJI RS2

I got this so I CAN control focus and Zoom at the same time when needed... also GREAT for off-gimbal control.
EDIT: Forgot to mention in the video that the 'receiver' is included in the box. ALSO very important note - when the 'handle' is in DJI Mode you CAN change the functions such as ISO and so on... exactly what you can do with the 'normal' gimbal wheel. Additionally the button with the white square is the 'trigger' function.
The USB-C port is for firmware updates ONLY... pls do NOT plug a charger into it ;)
Additionally, the maximum distance for the handle to still operate is 80 meters according to the manual.
Furthermore, and VERY, VERY important - you CAN put the wireless receiver on the left Nato if you prefer. When I first got it and tried the left it did not work because the pins were not aligned correctly... take note of that on BOTH sides.
I bought mine from CVP UK - Check them out, they were super amazing updating me with info AND when mine arrived without the 'manual' in the box they linked me to the PDF manual -
cvp.com/produc...
YOU can also find the manual here on the 'product page' - tilta.com/shop...
Oh and a dab of epoxy fixes the 'self-ejecting' joystick head.
And Tilta has increased 'International Shipping to $45'!!

[@daylight5500]

5 November, 2022 the good wishes back at you. Cheers!

[@aNELeOnwuka]

Thank you!!

[@benmcphee4401]

Not often a review makes me laugh out loud. :) Love the humour mate!

[@aNELeOnwuka]

Teehee. Thanks a lot man!!! Really glad it did.

[@wesone77]

This answered every question I had about his handle, thanks!

[@aNELeOnwuka]

You're very welcome. Glad it did.

[@ozzmanzz]

Thanks very much for posting this! I just got mine and would never have figured it out without your video.

[@aNELeOnwuka]

You are very welcome. Glad I could help. You have a wonderful day and great week ahead!

[@boatengphotographic2303]

As a both a Londoner and a fellow West African, I REALLY enjoyed this content. Keep it up my brother 👏🏿👏🏿👏🏿👏🏿👏🏿

[@aNELeOnwuka]

Thank you very, very much ny brother!!

[@Schattex.]

10/10 for comedy value. Thank you for showing us the DJI to Tilta motor switch. That is insane because i own on of each

[@aNELeOnwuka]

Aawwww thanks. Glad you enjoyed the video.

[@sygad1]

brilliant review, thanks for walking me through the contents of the package and how to get around connecting it to a different arm

[@paulscinemareel5671]

Love the nato rail idea ! Awesome thank you. Just ordered my handle.

[@aNELeOnwuka]

Well thank you. It's a brilliant way to get a useful item from the 'Eco-system'! Don't know which camera you use but do see if this might interest you as well; they do it for a wide range of cameras... kzbin.info/www/bejne/oZCtqKCQbKtrd6s

[@EugeneMaynard]

Great info, especially with the ejecting button issue! Loved the mad African!😂🙏🏾

[@aNELeOnwuka]

Thanks a lot man. Teehee, I immediately fixed mine with epoxy... I hope Tilta did the same. Ahhhhhhh my Nigerian PRINCE is not me name lolol.... glad I could make people laugh.

[@Wadesez]

Thanks for this very helpful review, not many people taking about this controller. Also like the way you've set it up, I was looking at the Tilta rear control handle, but your setup is much more versatile.

[@aNELeOnwuka]

Hey, thanks a lot. Haaa, I was also looking at the Rear Handle as it came out way before this... then I saw it on Tilta website and asked CVP a UK supplier to get me one. Def a lot more versatile!

[@prismavideosoficial6853]

very good video, helped me so much. huggs from cape verde.

[@aNELeOnwuka]

Awwwww thank you very much. Glad it helped you and hugs back from not-rainy-today London ;)

[@anthonyjames7106]

Thanks so much for this video and great job...couldn't get the handle and gimbal paired until I saw your demo...

[@aNELeOnwuka]

You are very welcome, so glad it helped!

[@MichelArens]

Thx bro! Great and fun video with good and honest info 🙏🏻

[@aNELeOnwuka]

Cheers bro, very glad you liked it.

[@ArtMalian]

Thank you for great video< God Bless you from California!

[@aNELeOnwuka]

Ooh sunny Cali!! You are very welcome and God bless you too.

[@filmalgarve3512]

Thank you very much for this video: we couldn't pair our handle as happen to you and by pressing the M button as you suggested I guess the third time finally it worked out.

[@aNELeOnwuka]

`You;re welcome/ Glad to hear it helped! Enjoy your handle, I like it a lot.

[@djile]

3:12 sir you saved my life :D I've been trying to pair all morning and couldn't уntil I watched your video. Thank You! :)

[@aNELeOnwuka]

You are very welcome. Glad the video helped. Thanks!!

[@gusjaramill0]

Thanks for the link. Came from the facebook group. Thanks a ton. Very informative video

[@aNELeOnwuka]

Oh nice. You are very welcome. Glad you liked it.

[@edjillings5451]

We love to see this! Thanks for an informative and entertaining walkthrough, respect!

[@aNELeOnwuka]

Thank you very much; glad you enjoyed it. Respect tp you too.

[@ALLTHINGSCINEMA24]

VERY WELL DONE AND SPOKEN video bro. I just subscribed fellow filmmaker!

[@aNELeOnwuka]

Thanks a lot bro, greatly appreciated!

[@tomgorelik]

Bless you for making this, answered all my questions for my use-case

[@aNELeOnwuka]

You are very welcome. Glad it was helpful.

[@MrTegid]

Fantastic review. Incredibly useful.

[@aNELeOnwuka]

Thanks a lot man, glad you enjoyed it.

[@nigerian-nightmare]

You are so funny. You need to make more videos.

[@aNELeOnwuka]

Thanks a lot man!

[@rgrebby]

Great video. Thanks for your help!

[@aNELeOnwuka]

Thanks a lot man and you are very welcome!

[@StuHaightVideo]

Siiiiggghhhhh. Fine I'll go buy another super handy product XD XD great work and thank you for taking the time to do these.

[@aNELeOnwuka]

Aawwwww bless. Thanks a lot man. Glad you enjoy these.

[@holmanwl]

You, sir, are a delight. And delightfully thorough and candid in the review! Thanks! I subscribed!

[@aNELeOnwuka]

Hi William, thank you so much for the comment and the sub. I really appreciate it. Glad you enjoyed it, will keep on trying my best.

[@n1s1mo]

Thanks so much for review

[@aNELeOnwuka]

Cheers. You are very welcome!

[@danielpinci6825]

I like your review. You are funny. Please keep going.

[@aNELeOnwuka]

Thank you very much!!

[@fredfred3692]

Usefull & fun ... Take care

[@aNELeOnwuka]

Thank you so much; glad you enjoyed it. You take care too.

[@VIPAH]

Appreciate the video! I noticed you have the wireless controller receiver module. I'm just using the RS2 dual handle grip so i figured this will allow me to use it for controlling pan and tilt functions.

[@aNELeOnwuka]

Hiya, thanks a lot. The 'receiver' (the Tilta nato thingy connected to the gimbal does come in the remote handle box)... it's mentioned in the description. Hehe, forgot to say so in the video.

[@PauloMamani01]

big thank you man!

[@aNELeOnwuka]

You're very welcome!

[@ONtvChannels]

Excellent and precise instructions - thank you! Have liked, subscribed and set the bell, Best John.

[@aNELeOnwuka]

Thank you so much John, that is very kind of yoy. I will keep trying to help in my own little way!

[@camerariggingmods9667]

Hey brother if I'm not mistaking the remote receiver works in both sides you just have to flip it upside down

[@aNELeOnwuka]

You are absolutely correct and I will update the description with this information. Thanks a lot for that. When I first got it and tried it, it did not work as the 'pins' were definitely not aligned properly. This is what I love about the community... have subbed to your channel. EDIT: Description updated and have credited you with the information. Cheers man!!

[@suatsekil]

thanks for sharing good luck

[@aNELeOnwuka]

You're welcome and thank you!

[@markrobinson8254]

thank you. great.

[@aNELeOnwuka]

You're welcome.

[@lucrativestance]

The dji rs2 remote controller seems built abit better BUT tilta definitely has the better ideas .

[@aNELeOnwuka]

I think the DJI handles are all 'tethered'? I'd rather not have a handle connected with a cable. This one has a wireless range of 80m.

[@phwe9020]

Thank you for your great video. I have one question. If I use a camera which is compartible to the RS2 can I pull the focus with the wheel on the backside of the Tilta Handle without having an external focus motor?

[@aNELeOnwuka]

Thank you very much, glad you enjoyed the video. I will say 'YES" but will give the example I know for a fact... as shown in the video I use the BMPCC 4K camera, the 'native' mount is MFT. If I put on an MFT lens like my Panasonic 12-35 then I do NOT have to use a focus motor and can pull focus electronically. I guess native mounts with native lenses should allow you to do that.

[@samfalconi]

Yo your videos rock dude, keep doin your thing! Informative and OG

[@aNELeOnwuka]

Hey Sam, thanks a lot man. Glad you like them.

[@MoniJohnson]

Good info! Mine wasn't pairing. Just kept blinking red. Pressing the M (mode) button resolved the issue

[@aNELeOnwuka]

Thanks man, glad that helped.

[@vitsedlacek981]

hey, thanks for this video! I am wondering how this handle feels compared to DJI? Same premium feeling? How is the joystick? (Apart from button flying off:))

[@aNELeOnwuka]

You're welcome. Feel? I'd say feels great... it is NOW premium as I epoxied the joystick the day after the video. Has been absolutely perfect since then lol.

[@xavieryt412]

Nice video mate !

[@aNELeOnwuka]

Thanks a lot man. I appreciate it.

[@joaocastro2714]

Hi! Thanks for this video! Cleared lot of questions that I have about th handle! Let me ask you, could you tell me more aboute controlling bmpcc4k with it? The start stop recording control, how it connect to the camera to control it? and how do you managed to fix it? i didnt quite understand that. Tks and greetings from Brasil

[@aNELeOnwuka]

Hi, glad you enjoyed the video. The control for the BMPCC 4K and pretty much every other camera is from a cable plugged into the TOP port of the RS2 gimbal - the cable comes in the box when you buy the gimbal. I believe the RS3 Pro can do this with bluetooth - I am not 100% sure.

[@joaocastro2714]

@@aNELeOnwuka tks for the answer! It is as I thought it would be! Controlling from USBC cable. I use ssd to record, so, no recording control for me! And about the RS3 PRO, yes, it controls the camera with bluetooth connection. Tks a lot

[@aNELeOnwuka]

@@joaocastro2714 I also record to SSDs but CAN also use 'gimbal camera control'. You might find these other videos of mine to be of interest. SSD video 1 - kzbin.info/www/bejne/an3SdIxvYpVqf5o SSD video 2 - kzbin.info/www/bejne/q2mkq3eOiM-hisU

[@ddasomhada]

와 진짜 너무 감사합니다 드디어 페어링이 됩니다 ㅠㅠ

[@aNELeOnwuka]

물론이죠.

[@nolesdennhardt8986]

Haha your awesome. Thanks :)

[@aNELeOnwuka]

Thanks a lot!!

[@agenericaccount3935]

That is rather novel.

[@aNELeOnwuka]

It is. Glad you enjoyed it.

[@davidp158]

Thanks for this detailed review! The LCD screen looks tiny like the one on the Nucleus Nano, which is extremely difficult to read. Q: Does the handle mount at the bottom only, or can it be mounted at top end? Q: Other than the Nato rail that you added to the RS 2 handle, does everything else come as shown in your video?

[@aNELeOnwuka]

Yes it connects from both ends as it is also used for the 'ring'. The screen is small but is higher quality than the screen on my Nano; better to read but dang I'm with you on small screens. Everything including the Rx connected to the side of the gimbal is included in the box.

[@navpreetsingh8156]

Hello, great video, how have you got the tilta motor working? Is that a usb c to micro adapter on it? Mine doesn't respond and I have the usbc to micro usb cable

[@aNELeOnwuka]

Hi there, glad you enjoyed the video. I use a special adapter to get power from the gimbal as shown in an older video of mine - kzbin.info/www/bejne/o2a9aHl-Z9lpj9E Later Tilta released a special cable that I use for something else - tilta.com/shop/nucleus-nano-motor-micro-usb-to-rs-2-8v-power-cable/ What I actually use the Tilta cable for is to power my camera from the RS2 shown here (my own version of the dummy is shown near the end but do watch the whole video) - kzbin.info/www/bejne/oZCtqKCQbKtrd6s Hopefully this helps answer your question.

[@navpreetsingh8156]

@aNELeOnwuka thanks I've ordered the micro adapter from ebay as it was much cheaper on there, I am moving to the RS2 for a jib so 1 small handle over my current ronin m controller will make life easier

[@aNELeOnwuka]

@@navpreetsingh8156 Brilliant, glad I could help. You're def going to enjoy the RS2... pretty amazing gimbal!

[@Pooya-kyani]

👍👍👍👍

[@chris_kalani]

Great info! What is the range on the wireless remote? Could I use it at about 100 ft. away?

[@aNELeOnwuka]

Thank you. The range is 80M which is 262ft so you should be good.

[@chris_kalani]

@@aNELeOnwuka mahalo nui!

[@aNELeOnwuka]

You're welcome!@@chris_kalani

[@georgeneagu69]

sind camera foto Hello, with the front wheel can you also control the up and down movements of the gimbal?

[@aNELeOnwuka]

You probably can, I can't remember but if you can with the gimbal front wheel then you definitely can with the handle front wheel. It can do everything the gimbal wheel can do.

[@davidp158]

Is the wireless receiver module included or is that an extra item to purchase?

[@aNELeOnwuka]

Always, always a good idea to read the 'descriptions' of videos. as it may have information not included IN the video. Yes it comes in the box.

[@HelloImMaxxHennard]

Hey man, whats the battery life on this thing? Also, is it possible to mount a monitor to the top of the handle when using briefcase mode?

[@aNELeOnwuka]

Battery life is forever... days before you need to charge it. In the vid I guess you saw the different 'mounts' - Nato, 1/4" and so on? so of course it is possible to mount a monitor.

[@davidp158]

Do you know the process to calibrate the focus wheel on this grip? I can see how to get to the calibration function in the menu, but can't determine the steps and button combinations to preform calibration.

[@aNELeOnwuka]

Hiya, can you try this - full steps - 1) Turn ON 2) Press the ON button 3 times (it's also the 'menu' button... I know man) 3) Use joystick to get to FUNCTION 4) Press the button with the 'M' - it will show 'Wheel Calibration' 5) Press the 'M' button again - it will show 'Start-End' 6) Move focus wheel to your 'start' point 7) Press button with the 'square' FOUR times. 8) Move focus wheel to your 'end' point 9) Press button with 'square' FOUR times. 10) Press button with 'M' ONCE. 11) Press ON button once to return... now calibrated for that 'range'. Have never liked the speed of the above method; way too fast. Personally I prefer the WHOLE range; also easier to do Repeat all the above to step 5 6)Move focus wheel all the way to one end, pause for a sec and roll all the way to the other end. 7) Press button with 'M' once. 8) Press 'ON' button once to return - You now have calibration 000-999 with full smooth rotation. I've left mine like this since forever; if you find anything else out let me know. I hope this is what you meant.

[@davidp158]

@@aNELeOnwuka Thank you so much for this detailed reply. Tilta makes some great gear, but the control handles and Nano gear uses cryptic button presses that are hard to remember, and tiny menus that are hard to see. I will print out your instructions and try to commit them to memory. BTW, once the wheel is properly calibrated, I often set the A+B stops to set my focus points across the full travel of the control wheel. This often allows for MUCH smoother and finer control, rather than trying to manually land on the A and B points within the range of the control wheel. To set the A+B points, you have to dive into the menu to find this under the function features of the motor. BTW, the A+B points ONLY work in the "Tilta mode" with the Nano motors. I wasn't able to set A+B points with the DJI motor. Thanks again!

[@aNELeOnwuka]

@@davidp158 You're welcome. Oh maaaan do they make some stuff complicated or what? I ended up on the last way I explained and just left it there as I'd never remember or want to fiddle with stuff during a shoot. Not perfect but for the price I can live with some things.Oh it's pretty much my 'shoulder rig' handle now as I added a Blackmagic Micro as the new gimbal camera... zero camera control thru the gimbal but it's TINY... I went for small size and less weight.

[@ragged9242]

The nato rail idea, how does it hold? With one screw only holding doesn’t it twist?

[@aNELeOnwuka]

Have used it since the video was made. Holds up perfectly, never twisted not even once. I'll say go with the same low-profile Smallrig Nato... don't know if 'tall' Nato rails will perform the same.

[@raildude270]

Is there a way to lower the sensitivity of the focus wheel? The 18-35 has no focus throw

[@aNELeOnwuka]

Have your camera on the gimbal and everything turned on. Go into the DJI app, go to Create and change your 'motor speed'... I think it's called that. Has nothing to do with the Tilta handle tho.

[@mill3ronfir3gaming51]

can i use this with the ring grip plus and the stock handle at the same time? connect two at the same time?

[@aNELeOnwuka]

I don't know if you can use both at the 'same time'; I don't think so BUT it's best you send Tilta an email.

[@VIPAH]

What gear rings are you using? Never seen red ones before! Look pretty cool dude! 💯

[@aNELeOnwuka]

The rings are from FollowFocusGears. However, there is a guy in Europe now making them so depending on your country you can buy from the US or EU. US people - followfocusgears.com/collections/sigma/products/seamless-follow-focus-gear-ring-for-sigma-18-35mm-f1-8-sigma-art-lens?variant=21512634466387 EU people - www.ebay.co.uk/itm/203042839046?hash=item2f464bda06:g:K8IAAOSwjFVfVjBw

[@VIPAH]

@@aNELeOnwuka Champion cheers for links!

[@aNELeOnwuka]

@@VIPAH You're welcome man.

[@SaintKriss]

Great Review. Do you know if the DJI 3D Focus can work with the Tilta M motors with this handle added to the rig?

[@aNELeOnwuka]

I know this handle controls 'Tilta Motors'... so that should include the 'M'. As for the 3D Focus... no idea about it.

[@soyGigiCarapia]

i lose mi joystick and im looking for one ... but i lose alllll the part .. any solution ?

[@aNELeOnwuka]

I immediately put epoxy on mine. Contact Tilta and ask if the replace them.

[@nickrichardsfilm]

Any idea if the handle can connect to the nano without the gimbal? It would be a nice focus handle for handheld work.

[@aNELeOnwuka]

Yes it can. It only 'needs' the gimbal for the DJI motor... have put this on my Crane 2S gimbal with the Nano motor.

[@nickrichardsfilm]

@@aNELeOnwuka thanks for the quick reply! Very good to know, is the pairing process similar?

[@aNELeOnwuka]

@@nickrichardsfilm No pairing process really with the Nano if I remember correctly... just put them on the same channel number... like the normal Nano hand-wheel.

[@JoseLopez-tp4lr]

Can It be connected from the top part as well? Or only the bottom has the pins?

[@aNELeOnwuka]

Yes it can be connected from both sides. It is alse meant for the 'ring' so definitely yes.

[@rostislavshevtsov]

HI it work only with Ronin RS end RS 3Pro? But it not going to work with Ronin RS # ?, Right? Or it’s possible?

[@aNELeOnwuka]

I would believe RS2 as shown in the video and RS3Pro... will not work with the older Ronin S

[@manmanzi2487]

💯👍👍👍

[@VoidedVisuals]

How to I get it to work with the motor that came with the rs2?

[@aNELeOnwuka]

From 3.50 in the video.

[@lonewolfproductions7613]

Have you tested the range and can it control any of the camera setting?

[@aNELeOnwuka]

I have not tested to their 80 meter claim. The most I have done for a shoot is probably about 50/60ft. Having said that I do NOT foubt their claim, I never have to shoot from that far away. Camera settings control... YES. Mind you depends on the 'camera'; basically ANY control you have on the RS2 with your camera make you will also have with this handle. Hope that helps.

[@lonewolfproductions7613]

Thanks so much for the info. This may be what I use for my cable cam set up. Not to bother you too much but how the heck did you get both a nucleus nano and the Dji focus motors on the same rail? They’re different diameters.

[@aNELeOnwuka]

@@lonewolfproductions7613 You are very welcome. Oh the rods... I've been making 'tips' videos from day one - what a weird thing they did going with 12mm. Here is my original 'rod fix' video - kzbin.info/www/bejne/sGrIiIKfp795ZsU Then recently this became available and comes with the 'adapter sleeve' - it will also fit Tilta cages but NO other Smallrig cage (I also have one but still use the ones I made) - www.amazon.co.uk/gp/product/B094JMJ37B/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 As you are going to use a cable cam maybe see if these from a different video of mine will be useful - kzbin.info/www/bejne/oZCtqKCQbKtrd6s All the best.

[@lonewolfproductions7613]

Wow man. Thanks for all the advice. Just made a few Amazon orders. Multiple problems solved!

[@aNELeOnwuka]

@@lonewolfproductions7613 Good good. You are very welcome.

How to change the channel ont eh hand control?

[@aNELeOnwuka]

Go into the menu, it's there.

[@EPICSHOT]

Great content and tips! Thank you, sir. One question though - when using Focus Wheel in DJI Focus Mode - can I change it's functionality to Aperture or ISO? Thx

[@aNELeOnwuka]

Hey thanks a lot. Oh yes you can... it does everything the gimbal wheel does in those settings. My bad, only found that out after I had made the video. It's a brilliant 'handle'.

[@murataksay]

@@aNELeOnwuka Hi thanks for the video, cant figure how to do it? need some help 🙏

[@aNELeOnwuka]

@@murataksay Hiya, thanks man. Ok what bit do you need help with, what is happening with yours?

[@murataksay]

@@aNELeOnwuka What do you press to set the iso or F ? Couldnt find it

[@aNELeOnwuka]

@@murataksay It’s in the video description. Click to expand and read it. The handle has to be in ‘DJI’ mode… not Tilta Nano. Cheers.

[@lucrativestance]

I ordered the hydra wireless remote and it honestly isn’t great, and it was $650usd . I will be retuning it

[@aNELeOnwuka]

Ok. I don't know that item; what was wrong with it?

[@DeanReynoldsMusic]

Will the Tilta remote handle work with DJI RSC-2 as well??

[@aNELeOnwuka]

No it will not unfortunately. RS2 only!

[@fnissels]

did anyone here tried this remote with a Sony camera and knows if the front wheel can also control the electronic follow focus (so without using the motor)? Thanks :)

[@aNELeOnwuka]

If you CAN do that with Sony cameras on the 'gimbal wheel' then you CAN do it on the 'handle wheel'.

[@fnissels]

@@aNELeOnwuka thank you! Ok so that means that if I choose on the gimball to use the front wheel to change the aperture, the iso, etc in the menu, that change will then be effective on the tilta's remote front wheel as well?

[@aNELeOnwuka]

@@fnissels Yes.

[@sinteredmedia127]

Hey, would this be a good move for those who have had the joystick fault in the main RS2 unit? Or does the main joystick still take priority and work

[@aNELeOnwuka]

Hiya, you can use either. This one does not 'need' the actual gimbal joystick to be working.

[@ive595]

Would love this but I have the RSC2, have you any idea if it will work with the RSC2?

[@aNELeOnwuka]

Hey man, I'm fairly certain it will NOT work with the RSC2. The gimbal you have doesn't have the Nato contact points for the 'receiver' to attach to and as a result, no way to communicate or work.

[@JaredSpink]

how do you have the dji focus and the nucleus on the same rail? doesn't the nucleus need a larger rail than the DJI?

[@aNELeOnwuka]

Very good question. It does need a larger rail, however, there are work-arounds. Have a look at my 1st 'Quick Tip' video for RS2... and then maybe the playlist. kzbin.info/www/bejne/sGrIiIKfp795ZsU

[@HiveRealEstateMedia]

@@aNELeOnwuka thanks so much

[@aNELeOnwuka]

@@HiveRealEstateMedia You're very welcome!

[@divil2273]

an you controll the roll axiss?

[@aNELeOnwuka]

Yes you can, I never use that but have done so before... can't remember the setting you need to use.

[@tomgorelik]

@aneleonwuka Where do you have the nucleus plugged into?

[@aNELeOnwuka]

Bottom port BUT you need an adapter to get power from the gimbal as I show here - kzbin.info/www/bejne/o2a9aHl-Z9lpj9E

[@tomgorelik]

@@aNELeOnwuka Interesting, so you have both the DJI follow focus AND the Nucleus powered from one port on the RS2? (Bottom port I imagine)

[@aNELeOnwuka]

@@tomgorelik No, not at all. The DJI motor plugs into the MIDDLE port.

[@tomgorelik]

@@aNELeOnwuka ohh duh thats right, Raveneye goes into the bottom port. So ultimately, I'd probably have to run an external monitor if I want to have camera control, focus AND zoom?

[@aNELeOnwuka]

@@tomgorelik Are you using the 3DFocus thingy??

[@suatsekil]

I want to buy Dual Channel Wireless Lens Control Handle, I want to ask that question: Can I use it without DJI RS2, I want to connect it to my steadycam for focus. May U help me please? I have tilta nano follow focus system. Thanks

[@aNELeOnwuka]

To learn more about that specific handle why not first read the information on that product page?

[@suatsekil]

@@aNELeOnwuka very informative Im reading now :) thanks

[@aNELeOnwuka]

@@suatsekil Yes, they usually have the relevant information on product pages. My handle is a different one. Only heard about the 'Dual Channel' when you wrote that. Yes the page is informative - it's nice but can't control the DJI motor only 2X Tilta motors.

[@felipevece]

it is posible to control 2 Nuclos N motors with the same Tilta remote control?

[@aNELeOnwuka]

No. For that you need the 'Dual Channel' handle.

[@felipevece]

@@aNELeOnwuka ok, thank i was thinking if you change the switch it could let you use one moter and when you change the switch as in the video let you use the other motor as with the ronin s2 motor

[@aNELeOnwuka]

@@felipevece Yes but as in the video I showed it has 'DF' - DJI Focus Motor and 'TF' - Tilta Ficus motor. One wheel so one at a time BUT to use TWO motors at the same exact time set to TF and use the handle wheel for a Tilta motor and the gimbal wheel for DJI motor. However, for 2X Tilta ONLY motors your only choice is the dual channel handle.

[@EssinkVideo]

Has anybody been able to figure out what the use of the usbc port is?

[@aNELeOnwuka]

Hiya, the USB-C port is for FIRMWRE updates ONLY!!

[@EssinkVideo]

@@aNELeOnwuka here’s to hoping the update the firmware to allow cabled control of the focus motor for off gimbal use.

[@aNELeOnwuka]

@@EssinkVideo That would be major cool BUT doubtful as it doesn't even power the motor. However, for 'off gimbal' use the Nucleus Nano motor works without needing the receiver on the gimbal... I've actually used the this handle and Nano motor on my 'spare' gimbal - the Zhiyun Crane 2S.

[@EssinkVideo]

@@aNELeOnwuka where do you find the firmware for the handle I cannot locate it

[@aNELeOnwuka]

@@EssinkVideo I don't think there has ever been any update.

[@timothyawe5103]

Will it work with a Ronin rs3

[@aNELeOnwuka]

Yes it will. Here’s some useful info - many videos have links to items in the description. Clicking the link for the handle would have taken you to the Tilta item page where you would have read the compatibility. If you can do try to have a look at descriptions first as the answer to any might be right there.

[@maciex37]

How did you connected Tilta Nucleus N to RS2?

[@aNELeOnwuka]

Hi, I'm guessing you mean how did I power the Nucleus Nano FROM the gimbal? I made a video about that a little while earlier - this one kzbin.info/www/bejne/o2a9aHl-Z9lpj9E

[@shwnmcd]

Does this work for the rs3?

[@aNELeOnwuka]

Yes but Googling the product would give you a complete answer and let you know any differences.

[@vladikorn]

Thanks!

[@aNELeOnwuka]

You are welcome.