Time to trade the 535 John Deere Baler??

We have had this baler since new in 94

[@chuckstevenson2929]

Good video. Thanks for the ride along.

[@rivervalleyfarm482]

Glad to see Shawn. My little boy will be happy.

[@glenvanbavel2094]

If you keep your 535 hook up transmission cooler to the pump to keep it cool . We mounted it on the front . It works really good . We had the same trouble with over heating the twine arm pump .

[@stanleyjones4180]

great video tyson thanks they look big windrows

[@farmark457]

Guy baling my wheat straw had a new Kuhn round baler. Nice bales and popped out one in 30 seconds, he was flying

[@jankotze1959]

Nice video, stack up for the winter,

[@canvids1]

Very interesting thanks

[@johnowen6507]

we used to have trouble with our old 530 starting bales, we welded some 3/8 rod to the starter roller and it seemed to fix the problem. still have the old girl around as a back up. hope you have a good season man!

[@Northern_Farmer]

john owen I heard of people doing that...ours has square bars on the starter roll

[@GerraldFarms]

Good looking Hay .👍🏻

[@FarmingFixingFabricating]

Looks like some nice looking hay

[@rileytharaldson3237]

We run 2 jd 535 round balers on our 4440's and they work great

[@SteelyPaw]

I saw a guy that carries a twin battery Makita leaf blower with him, and the leaf blower does a really good job cleaning the dust and grass off the equipment, for example your baler. He purchased two extra batteries which he said lasts a long time, and with extra batteries he can have one set charging while using the other set ......... Why does Shawn not work for you full time? He seems to have farmer blood running thru his veins and is good at it and a big help to you.............

[@SoybeanFarmer3300]

nice in the field belt replacement. roll on Farmer.

[@markgamble8377]

Yea hate that sight when dosent wana take.my 435 has bar on back kickes bale out.been having little trouble cutting string. Think got it changing those washers on the little tab on arms that push or pull the knife down. No greas fitting on knife that arm pulls down.slid off shaft greased. Used to make 4×6.cut it down 4×5 for selling. Cows gone. Equipment sure has changed. Made farming much easier.as long as the computer and sensors work.

[@leol1682]

Hey Tyson I can see Shaun is working with you .

[@condod414]

Hope you went back to pick up the garbage in the field. Thanks for sharing. Stay dry.

[@isbcornbinder]

That hydraulic pump is a SAGINAW/GM That pump has been on every GM vehicle with power steering for 50 years. If you need a replacement, get it at an auto wrecker for $20

[@jamesw5607]

Relief valve is different though. Have to use the valve from the original pump otherwise you will constantly blow belts

[@SuperHonda185]

I gave up on that pump was having so many issues I just hooked up two lines to the valve with a flow restricter dialed it all in now I have zero troubles with twining bales!

[@Northern_Farmer]

Ill give up on it when I sell the baler lol

[@peterbakkers5523]

I have a 535 as well when I have an issue starting the bale I raise and drop the pickup a few times that gets it going most times for me anyway

[@davidtobias1665]

Shaun is probably thinking, I'm over here working and Tyson is playing on You Tube. lol

[@daleolson3506]

That looks like a gm power steering pump. Put a cooler on it they are cheaper than news pumps

[@Lucky4wd4840]

I still have a JD 530 that I bought brand new the last year they were made! The newer ones have a lot more sensors and wiring. The electric tie actuator is also costly! You need a volt/ohm meter in the field to work on the new ones.

[@Northern_Farmer]

Lucky4wd4840 it is pretty costly...I bought one for the 566

[@dallasslaubaugh6861]

thanks for the video. was considering one of these to replace one of our 664 new Hollands or a rs561 case ih (hesston) nice to see a video of the downfalls without having to run it a season and learn the hard way. thanks

[@Northern_Farmer]

Dallas Slaubaugh The 568 and 569 are probably the best ...built heavier, and faster. The 566 we have works a lot better. If you were getting one I would recommend the 568 or 569, but the 566 or 567 would be the next best

[@dallasslaubaugh6861]

Northern farmer I see. looking to upgrade to something with netwrap but have seen a lot of 535s for sale locally pretty reasonably priced. in our area nearly $7k+ (us) jump in price to a 567 netwrap from a 535. any issues starting bales with your newer deere? we do corn stalk bales in the fall and our neighbor has trouble starting bales with his jd. but he doesn't have the mega wide pickup which seems to make a difference getting them to feed.

[@Northern_Farmer]

Dallas Slaubaugh no issues at all with the 566.

[@kswaynes7569]

As long as I'm spending your money, You definitely need a new baler! Don't know if a Vermeer baler will be available, tornado just took out one of their facilities in Iowa. Tornado hit during the afternoon but I don't think there were any casualties.

[@TheAgrotechnik]

If Vermeer balers are the same as Lely (soon only Massey Ferguson and Fendt...), they probably would buy best baler on the market.

[@aldenjohnson6146]

Had the same feeding problem our 605l Vermeer

[@troyp467]

You should look at upgrading really, ti would make sense. We've ran a 566, 567, 568 and a Massey 2756A. All were great, you could probably put a bit more feed through the 567 or 568 but the Massey made a bit better bales we thought. The new ones I have heard you can bale just as fast with though. Heard good things about Vermere too. If you like John Deere, you won't be disappointed with newer models I think, but Massey or Vermere are definitely worth looking into.

[@Northern_Farmer]

Troy Peel not looking at a 567..the 568 and 69 are built way heavier

[@Northern_Farmer]

Troy Peel the thing us john deere is 5 mins away...all other dealers are 2 hours or more

[@troyp467]

Ohh I see. Yeah well I couldn't blame you for sticking with John Deere for most things then. Like I said, a newer Deere baler would do you well. Stick with the red tractors though haha.

[@danielaltman9945]

I still have the original pump and drive belts on my 435. Maybe pull it out of service and completely go through it? Would be cheaper than a new one.

[@feelnrite]

You ever had to replace anything on the bale density valve on the front?

[@markhertzog6636]

I didn’t even have time to watch this video. Yes trade the 535! We ran 2 for about 20 years. Traded them both for a 568 and it easily outperforms them.

[@Northern_Farmer]

Mark Hertzog yup...I'm looking at a 568 or 569

[@farmingyear3972]

Hi nice video

[@bcpfarmandtrucking6560]

Nice looking hat...only problem I see is you dont have a New Holland baler😁

[@markmortensen4341]

So are you done with that field or done altogether❓

[@elmcustomharvesting1072]

If you had a storage building to put big squares in would you purchase a new big baler. Would it be easier for your operation to feed. I know the biggest thing is storing them outside to shed the water.

[@troyp467]

We used to do 3x3 foot square bales along with round bales. The squares are great for feeding in the barn but feeding outside round bales are probably just as good. Plus the thing with square bales, which is why we stopped doing them, is you need the man power to pick and store them right after you bale them. Round bales you can leave for a bit and it doesn't matter as much if they get rained on, but square bales get ruined with rain. They are nice to handle and stack though. Pros and Cons to everything I guess.

[@shawnzenz8682]

he probably wouldn't because he feds his bales with a processor and its a lot easier to get rounds bales in then squares. If he did get a big baler he get ah bad ass krone and put old smokey on the fucker and run laps around your new holland baler and be rolling coal with ah big old Canada flag screaming JUST OUT FER AH RIP.

[@troyp467]

I mean I'd pay to see that lol. Ya never really cared for new holland hay equipment either.

[@timothymiller4217]

Shaun is working off the farm so he can buy more equipment .

[@stevemondal.]

Right Shaun? LOL.

[@MatthewHoag77]

#RightShaun

[@georgedoorley5628]

get down when all is finished and roll out the mistied bale and rebale it .....here in ireland hay is 35 euro a 4x4 bale ....thats if you can get it .....massive fodder shortage for the winter ahead if it does not rain a lot in the next few weeks .....ev ery bale will matter

[@samrugtiv3839]

Good going sod buster

[@Flatlanderexpress]

back your pressure off when it is real dry.it is probably cranked up tight

[@elischultes6587]

My brother’s have gone from 530-535-567 to 605M Vermeers and not looking back. One is lucky to get bale an acre. his bale weight went up because the baler kept the leaves on the stalks. He theorizes it’s because the baler spins slower and doesn’t knock the leaves off.

[@Northern_Farmer]

The only problem I have is that its pretty farm to go to any vermeer dealer.... John Deere is close here

[@Northern_Farmer]

far

[@jasonmushersee]

my baler twine box is full of mice & i to broke a belt today on the haybine

[@sclivestock5943]

Hey Tyson what are most of your hay fields planted with? Alfalfa,Timothy? I just bought some land and need to turn a small hay field over. Wondering what I should plant for cows? Thanks for the video.Scott

[@Northern_Farmer]

Scott Burke alfalfa Timothy brome...cows love it mixed like that.

[@sclivestock5943]

Northern farmer Thanks for the info.

[@christopherdragon2689]

568 megawide

[@johnloken1445]

Good video.

[@shawnfox8002]

Does John Deere do a chain drive assembly that will last longer than the belt.

[@Northern_Farmer]

Shawn Fox no

[@patrickgeraghty3144]

Hey Tyson. Not sure if you have a dealer near by but have you considered a McHale baler. They are a real high output machine and the fixed chamber balers we run in Ireland for baling silage way outperform the Deere, welger Krone kunh. If you have a dealer anywhere near you should have s look

[@aussiefendt1796]

Patrick Geraghty he won’t want a fixed bale chamber... his doing pretty much only hay, but yeah for silage I would agree

[@chogg611]

kzbin.info/www/bejne/aoirm2qelJeKa5I nice units.

[@patrickgeraghty3144]

aussiefendt Mchale do belt balers also. I don't know much about them but they seem to have same intake as fixed chambers. My not be an option for Tyson as I don't know how good dealer support is in Canada but they are superb machines. Are they finding market in Australia?

[@aussiefendt1796]

Patrick Geraghty yeah there getting around now here in Australia, we do a fair bit of silage plus some hay and straw, the krone does excellent silage, and put out bales weighing the same or heavier than most other balers around our area, but yes the mchale’s are getting more popular in Australia

[@flyingmissesphotography494]

If you do trade the baler you shod look at the Vermeer non stop baler you would be able to keep up with the mowers

[@buffranchAB]

Too small of bales tho, pita

[@jwhitley101whitleyfarms9]

605n would be a good baler I have a 504r signature but it's a 5x4 but the 605super cornstalker is something else but tons of money for that one

[@jeffreyhollink985]

if you pay for id he wil look ad id😂

[@jrice1091]

Do you prefer twine over netwrap ?

[@Northern_Farmer]

who I like both

[@bobocaterpillar3697]

if THATS your worst problems, i'll GLADLY trade my old jd 510 for your jd 535!

[@Northern_Farmer]

Haha.. there are a few more problems that have krept up.. we used to have a old 510...

[@myronparks3495]

What year is that baler and how many bales has it made?

[@Northern_Farmer]

Myron Parks the 535 is a 1994...bought it new and as for how many bales ..I have no clue anymore..has to be around 25000

[@dehavenfamilyfarm]

Baler does seem problematic. Do you think you would buy another deere baler?

[@Northern_Farmer]

DeHaven Family Farm the 535 has a few problems...the 566 is a lot better...but we are looking at a 568 or 569

[@alanirishkelly6704]

You need to look at a mcHale knifed Baler

[@donald1056]

Just for curiosity why the duals

[@Northern_Farmer]

Donald Ellett why not

[@timbertrans]

are you near grand prairie

[@rakattler3813]

What field is this?

[@rakattler3813]

Sorry it straight pipes hahahah. I'm on the kids phone lol

[@SouthSaskFarmer1]

Way back in the day lol

[@Northern_Farmer]

Lol brings back the memories haha

[@jrbpa5775]

The problem with your baler is its green. Lol. Good video,thx

[@colvinharvey9933]

What's Shawn's relation to you? Brother, friend or what? Ive been racking my brain and I can't figure it out, by the way awesome video!

[@buffranchAB]

Colvin Harvey - Shaun is Tyson's nephew, Tyson's sister's young lad, Miss Monique says that Shauns mom is a beautiful Blond

[@jessestuehrenberg5301]

I've wondered the same thing

[@youthinksodoyeah1015]

he is Tysons husband yes he goes that wat so i have heard through the grapevine but says he is a nehpew to make it sound good

[@jackybruckers]

It is one of the mysteries of the North. We will never know , and we don't .

[@Northern_Farmer]

jacky bruckers he is my nephew

[@joseph-ur2ks]

will you demo and try another baler because from experience when you leave the JD balers you will never want to go back. the 500 series are probably some of the worst balers

[@Northern_Farmer]

I found they were some of the best balers... everyone else has caught up now.

[@joseph-ur2ks]

Northern farmer they may of been good back in day compared to newer balers they are the worst. see how farms work video on the krone round baler he had on demo. the bales are made so much better than his JD baler

[@Northern_Farmer]

@@joseph-ur2ks yea but comparing it to a old 566 is different than comparing it to the new 569 or the brand new 560s

[@joseph-ur2ks]

Northern farmer i still believe the krone would be better than the new JD's but i haven't seen any new JD balers in use

[@Tractorandsirens]

Yes trade it get a big square baler

[@turnwell9530]

get a red baler...nuf said

[@georgewyrick1859]

Time for a Krone eh?

[@aussiefendt1796]

George Wyrick oh mate we ran a welger baler, got a krone half way through last season and shit me it’s the best thing I’ve seen. Comprima v150xc x-tream. 5x4 bales of Oaten hay coming out at 400-450 kg a bale.

[@Northern_Farmer]

George Wyrick naw...I see they are to small and to far away from any krone dealers here...john deere is 5 mins away...

[@jimh6879]

Have you finely blocked the putz from Pennsylvania I don't see him

[@TheFarmingLife]

jim h I'm sorry you miss me.

[@alancooper5386]

well u got it half right, right color baler, but wrong color tractor. no need to sub every channel for ever, YT said i reached my limit at 99 channels i sub right now. so u will have to wait......

[@Northern_Farmer]

I didnnt know that you could only sub 99 channels... strange

[@jeffreyhollink985]

buy krone comprima cx155f ore ah newholland baler deere is just shit