Timing chain replacement Hyundai Sonata 2006-2009 GLS 2.4L DOHC Install Remove Replace

[@thetalkingboard]

Rare to find a real mechanic anymore, much less one who can narrate and record a high quality how-to video. Thank you

[@julioramos357]

You are good you are the only guy that show on this hyunday thank you

[@tahotoy]

Thank You ! You appear to be the only resource in near a half hour of research that disclosed the cw removal of the very tight belt tensioner bolt. Time to update the library.

[@BLKGAMBINO]

i loved it when you dropped your wrench it shows the truth about reality = nobody is perfect

[@yodazjockstrap2767]

Currently in he middle of this job, need to find where to buy the oil jet part

[@tylerjames9382]

This video is very thorough, and you cover everything needed for a successful operation. Thank you very much for the posting. I went ahead and made a thorough list of everything you need to successfully complete this job. Hopefully that will save you guys some time.. Again thanks Materials list • 21 mm socket for impact gun • 9 mil strength nitrile gloves • 10 mm socket extended with 3/8” socket wrench • 10 mm socket for impact gun • Phillips screw driver • New plastic Phillips screws with bracing • 15 mm manual wrench • Pry bar 2 one with notch • 10 mm manual wrench • Strong Impact gun • Post its • 22mm socket for impact gun • Car jack with 2 stands • Engine jack with block of wood • 17mm socket for IG • 15mm manual wrench with socket tech. • 14 mm socket (3/8”) socket wrench • Container of same oil • 17mm socket (3/8”) • 12 point socket for IG • Metal putty knife • Flat head screw driver • Rags • White highlighter • 12mm socket for IG • PB Blaster penetrant • WD40 • Tool box • Tension Wrench’ • Pins • Grease for the guides that guide the chain • RTV silicone • New serpentine belt • New seal in the timing cover

[@christophermusser4837]

L

[@christophermusser4837]

Z-

[@garza2015]

Thanks bro I know filming all this shit must’ve been a pain. But at least you’ve helped a lot of people and good luck is coming your way 🍀

[@Mechanic1307]

This is a great video. Thanks so much for taking the time to share your experience and expertise!

[@ChaZacIsa]

very extensive and painstaking to make this video, I bet. Good work, mate!

[@barclough]

THANK YOU! This video was extremely helpful. You were very thorough as you stated. you saved me $1200 . 2 Wrenches up to ya bro :)

[@jalalnoroozoliaee1760]

Hi, thanks for the helpful video. Can you please describe how the problem had manifested itself in this case?

[@chrisfurman686]

Can't find the gear oil drip tube that was damaged. Do you happen to have that part number? Thx

[@russhager9690]

Just wondering how do you support the engine after you pull the motor mount, I am at the step where i need to remove the oil pan but if drop the jack i will have no room to work on the cover? thanks for the great video.

[@leonardomateos5572]

You don’t need anything it’s won’t fall out if that what you are worried about

[@leonardomateos5572]

Russ Hager www.hsguide.net/timing_chain_repair_procedures-30.html

[@russhager9690]

Thanks for the response.

[@Derangedteddy]

Great video, but I have one piece of advice: Never re-use bolts that need to be angled. The reason for this is that the angle technique is designed to stretch the bolt to its maximum available torque without breaking. Since the bolt is stretched, when you torque and angle it again, you stretch it even further than it was stretched the first time, meaning that the bolt is much more likely to break.

[@Derangedteddy]

If you replaced the bolts and forgot to mention it, I apologize for my smart-assery. At the very least, your viewers will see this and be reminded not to do it. :)

[@OffGridInvestor]

22:16 you mean you didn't instantly notice that tensioner was all the way out?

[@safflff]

where can you get and what is the oiler for the chain that was damaged called, descricption

[@Juckalis]

Спасибо Вам большое, что сделали автос-слесарное видио и показали как надо смотреть и делать чистого авто корейца. У меня "NF"- 2006, 2.4I, 5M. Самого первого поколения. Запчастей НЕТ!!! (28.02.2020). Автомобиль на ходу в России. Очень надёжный. Ещё раз спасибо за авто видео.

[@JakeEkker1]

Do you know the max allowable tensioner extension? Or any measurement to determine if chain is indeed stretched ?

[@julioramos357]

I'm working on my 2006 hyunday sonata 3.3 .but the tensiones making noise when I stert the cer then about 2 second goes away ?can I change the tensión only

[@TetovoBoy]

Does engine needs to be lowered for the water pump to be taken out.Ths in advance

[@adventures223]

Is this pretty much the same procedure as the 3.3 liter engine in the 2006 sonata

[@jessejameshurtadoiii9916]

real quick is this the same set up as the 3.8l???? And can I replace the whole kit with the motor still in the car??

[@yodazjockstrap2767]

Love the video, the layout is exactly in line with my thought process on in what order should I do the job. Gained a sub for sure

[@gta8098]

Thank you very much bro. You help me a lot.! Now im going to remove the cylinder head.

[@tomgentry6409]

I didn't see the new tube replacement for the damaged tube that drips oil on the chain...you did a great job

[@tumaulaulu6842]

Thank you very much sir. You truly are a proficient professional.

[@levigrose1710]

Hey Im working on a 06 or 07 kia optima with same motor etc....here's one for ya a kid had towed to me motor wouldn't turn at all right...well I asked what happened right before he said his gf bumped it into neutral on cruise control so he put it back in drive and then lost power.....okay so I managed to get enough torque to spin motor back maybe 1\8 of a turn then it started but ran rough an blew heavy white smoke chain is still on you think it stretched and jumped time or valve job too

[@revengevrxx]

What instructions manual Did you use ?

[@lore927]

What could have caused the timing chain tensioner to fully extend and in turn push the plastic guide and the timing chain onto the oil jet? Can gunk have caused it?

[@vuduchildx]

12:35 ... what size are the 12 point bolts????

[@TheOutwiththeold]

12mm.

[@canekproduction1909]

I am going to replace a tensioner at 2008 Hyundai Sonata my question is thats going to move the time?

[@edcain3676]

Canek Nieto : Gates Has A T.Belt Assembly That Has All the Sm.Tensioners ,Jake Belt, But Doesn't Incl.the Main Tensioner,Which is $35-48,if I Recall.

[@gustavopinto5863]

Is this the same engine for a Kia Optima 2008 2.4L ?

[@classicstar1]

Yes

[@abdussameamoammer7600]

I would like to see the same on the hyundai santafe 2008. 3.3

[@jleonbright]

Best thing I found to do my water pump!

[@MidwestTeks]

What was the milage on this car? Was it maintained well? Just curious.

[@Senzenfrenz]

Hey,thanks for the Video!Please tell me, on 23min. that tensioner, you have to jam a screwdriver in that left hole? No less violate way to do that? I am stuck on my Sonata doing this at the Moment

[@Senzenfrenz]

Now I was able to do it just by pressing it backwards very hard and insert a needle to secure it from snapping back

[@zachlikesguns1]

Does anybody know if this is the same process for a 2010 kia forte koup with 2.4?

[@aiiceejew]

Hey Mr. Mech.-Tec. , I would like to know about the torque for the assembly per bolts that differ for a proper assembly for [diy]. Thanks for the video, I've been wondering when someone was going to work that problem and what happened to the drip tube also could you give an estimate for parts; Thanks.

[@aiiceejew]

I can't believe I missed that you mentioned the torque, please excuse me. Tensioners 10mm bolts 9ftpds. Got it.

[@fixingcarsandstuff]

aiiceejew I do not have parts cost handy I would call a local parts store or go online to one of many parts sites and try that route. amazon, parts geek....

[@enosngwenya6992]

aiiceejew

[@AnonymousAnonymous-mk2yv]

how many miles were on the car when you replaced the timing chain

[@bobbyw9766]

Makes my life easier appreciate the post thanks

[@burquenomadrid]

what's the reason for replacing the chain? rattle?

[@xdrfox]

may want to suggest changing water pump while you are there...

[@alazzawi87]

Thank you man for the detailed video, I hope that other Mechanics learn how to make videos like yours. 👍👍👍👌👌

[@davepersonal9082]

Thanks for this video.....our 2.4 is making a noise that a garage thinks is timing chain but it seems like it is coming from the center rear of the engine rather than the timing chain side....but it has to be this right? Can you say how many hours this took you? Wondering what a garage would charge....I like to do my own stuff but this one seems to be sort of rough.

[@kevjen10001]

My 2.4 is doing the same thing, did you ever figure out what it was?

[@justinwondolowski5396]

07 GLS Im getting the clinking sound only when transmission is engaged and mostly when pressing on brakes. Sound seems like its passenger side of engine. Does this sound like same as you and what did you find out? My mechanic keeps saying don't worry about. I'm worried I'm going to lose a driving car.

[@justinwondolowski5396]

07 GLS Im getting the clinking sound only when transmission is engaged and mostly when pressing on brakes. Sound seems like its passenger side of engine. Does this sound like same as you and what did you find out? My mechanic keeps saying don't worry about. I'm worried I'm going to lose a driving car.

[@jeffstanford6900]

@@justinwondolowski5396 did you ever find out what the causing the noise? I have a Kia Rondo and mine is making a noise like that. Though I'm going to replace the timing chain and the rod bearings just in case.

[@axnjxn1990]

Mr. Fixing Caers and Stuff, How much would a job like this cost?

[@sameermohammad2140]

how to replace timing change for kia carens 2007

[@tylerjames9382]

Do you know if the crank position sensor is anywhere near that area?

[@lesterfisher2872]

+Tyler James no, by the starter

[@serviotuliomarmolejospadil4038]

Muy buen vídeo, donde consigo los kit de repuestos y el kit de la transmisión automática. Very good video, where I get the spare parts kit and the automatic transmission kit.

[@thetruejuanalto]

what was that make again..? HAAYUUNDEEII???

[@MaxMax-fb5dv]

Why don't you remove the PS pump with its hose? It will make the job much easier. It is only 3 bolts.

[@FernandoContreras-y8k]

Saludos como hago para verlo en español

[@bernalgaston4180]

I need to replace a noisy crank bearing. The timing chain is still in great condition. Do you think I have to remove the timing chain in order to get the balance shaft module off? I'm hoping I have to avoid all this work just to get the balance shaft chain off.

[@fixingcarsandstuff]

I think that you do, take a good look inside oil pan and check for any debris, maybe consider how many miles may be on your engine too, before just fixing one part of the engine.

[@AnonymousAnonymous-mk2yv]

what was the mileage when replaced

[@swankydog]

Good instructional video. It helped a lot. Thanks!

[@carltrommetter8786]

What-No start up?

[@quarter_moon_and_a_guitar]

what would a shop charge for this?

[@joesmith6524]

good job, but hate too see what a shop would cost too do this job!

[@rodbuilder3657]

Twice what's really worth!

[@blktenor]

joe smith my estimate was over $1,500 dollars. 😣

[@rodbuilder3657]

How you guys put up with having to work on the front wheel drive shit is beyond me. What a pain in the ass. I think I'm gonna buy a 58 Chevy so I can actually work on the sob!!!

[@jobiker8727]

how much to fix? thanks!

[@rodbuilder3657]

From a former engine builder...................if this belt is meant to keep the cam "in time" with the crank how can it do that if it's not a cog belt? I don't get it??

[@rodbuilder3657]

Never mind!!! I see now that you're replacing the chain!!

[@fixingcarsandstuff]

This is a timing chain engine, not a timing belt, so I am not sure about this comment or question. It has chain and tooth sprockets.

[@kckrol85]

on average how much does this repair cost

[@sconon28]

I have the 2.4 sonata.. and there is a p0011 code... The motor is making a ticking noise. The question is if the timing chain is at the correct alignment marks what else could it be before I dive into this?

[@johnkeller7120]

Lifter tick

[@mikereynolds526]

how much would a job like this cost iam thinking about getting a 08 with a 2.4

[@LupeV]

i was quoted 750 from a hyundai dealer. I have 06 GLS 2.4

[@isaacasare7242]

Thanks soo much you helped me a lot.

[@rx7cl]

Nice work sir.....

[@ureasmith3049]

Thanks for posting/sharing this info. I hope I'll never need to do it. LOL

[@TECHNICALIQ]

Thanks for the clarification excellently !!!!!

[@igorvarlamov7485]

Thanks. Good video. This model, with the G4KC 2,4L engine soon 10 years on roads. Tell please, you remember what run on the odometer was at this Hyundai NF. The Russian drivers have an opinion that at G4KC 2,4L engines a problem for the oil pump. Specifically in the interchamber reducing valve. This problem is expressed in oil starvation on small turns, in the 3rd cylinder. Generally with run from 180 000 and after 200 000.

[@edcain3676]

Igor Varlamov ": Russians Are Correct.Oil Pump is Driven By Very Sm.Jake Belt,Not Sure of Mechs.on it.Mine has 225,000 & Only had to Replace.Jake Belt,Next T.Belt,Will Have Mech.or Machine Shop Check Oil Pump,if they can Tell Anything ,if Not,Will Repl.

[@codyburns4149]

They had tsb for change in oil capacity spec that addressed that issue. At Kia I fixed several of those oil pumps by cleaning debris and polishing valve. Cavitation from aftermarket oil filter run long enough will destroy the valve you speak of. Big fan of Russian Tech's you guys have good ideas.

[@TECHNICALIQ]

many thanks great video .

[@vloggershubby]

one think how come oil in water ???

[@rodbuilder3657]

Is that even a sentence? If it is it sure doesn't make any sense.

[@mrexecutive1]

Great work

[@snoopy81]

Why are you hiding inside the engine side?😂

[@JABales637]

Great video!!!!!

[@AuoMadadKareen8153]

اے ایمان والے انسانو. سدا خوش رھو. اللۀ پاک کسی کو اولا کا دکھ نہ دے سولہ سالہ معزور لڑکی زندگی اور موت کی کشمکش میں ھے والدہ وفات والد گردے کا مریض. پلیز پلیز پلیز نقدی کی صورت تعاون یا چینل کو سپوٹ اپکے تعاون کا شکریہ pppp

[@oscarpalacios7198]

THANK YOU SR

[@joesmith6524]

wow! 2015 where still changing timing belts, cant they make unbreakable or maybe different system elimating belt! lot of work the thing is buried!

[@humbertogutierrez7849]

my sonata has a engine noise heard really long chain

[@malo6868]

I was just quoted a price by a local mechanic for $1915.00 for this job...they said 14hrs. labor..No thanks! .I'm doing it myself!

[@edcain3676]

Thought My 05, 2.4 Was A Joke,W/ prob.Worst INTEFERENCE Eng.Made,But Idiot Engs.@ Hyundai Thought Of How to Ruin A T.Chain Eng.,Also,Which Are Usually Minimal Serv. LOL

[@giaple6237]

This guy does not even know difference between timing belt and timing chain, fake mechanics.

[@gerrykline744]

is the crankshaft position sensor under there as well.///?

[@edcain3676]

gerry kline : 2000-2005' s Are,& A Piss Poor Design on my 05,End that Doesn't Touch Crank is 3 ,1 guage Wires W/ Basically NOTHING BUT THIN LAYER OF SOMETHING Suppose to Protect Wires From Crimping, As It's Threaded Thru Eng.from Top to Bottom & Behind T.Cover.Crank Sensors Rarely Last as Long as T.Belt & Labor ,Shop Time is Almost Half of Time to Replace & 00-05' s Have A Frickin JAKE BELT That Turns the Oil Pump.Both the Cr.Pos.Sensor & J.Belt Need to Be Done W/ Each T.Belt Servs.& Aftermarket Cr.pos.Sensors Need Rubber Hose Added to Protect Flimsey 1 Guage Wires from Vibr.of Eng.,Which Is A Destroyer of the Crank. Pos. Sensor.Oreillys House Brand is the Worst Design I' ve Ever Seen.Alt.Belt Also Pulls Water Pump.If U Break A Alt.Belt.Better Have Spare in Trunk,Disaster Waiting to Happen.

[@reiannaidoo]

Great video