Running a McCulloch Pro Mac 850. This is exciting!!

I've never run a Mac 850!! Taking on for a spin to learn how it runs stock before I port it.

[@kevinhall3443]

Those Macs bring out the smiles for me. Love my Mac. “Old but Gold” !

[@johnnyhomegrownholmgren9999]

Thank you for your time! ❤️ This community is awesome! Just pure kindness. And Buckin’s live yesterday are a proof of that. I still got a hard time to understand what really happened. Thank you for being a huge part of this community of kind people! ❤️🇸🇪

[@j.chrisbeck7492]

Congrats on your new arrival soon. Kindness and generosity Rule.

[@timvandervest5575]

Bucking needs to send you logs along with those saws so you can really test the saws out! :)

[@thevermonster7934]

And some chaps....

[@ericolson1923]

Buckin usually cuts pine right? I think it shows more of what the saw can do when you cut in hard oak.

[@szaboendre9368]

You are a crazy craft men. Truly appreciate your time and devotion. Kind regards Endre from Down Under

[@davep6286]

Tinman you got some moves going on there.😂 make some great thumb nail clips 👍 looking forward to your build for this 👍🇬🇧

[@redtiller1975]

Glad to hear that you are going to work on the 5200 soon. I absolutely love that saw.

[@kevinmaxam2414]

Truly looking forward to this build. I never ran a big Mack but it does sound and look like I should have in days gone by. Be safe and be careful.

[@stevetheriault4164]

LOVE YOUR VIDEOS BUDDY,,,THANKS FOR ALL YOUR HARD WORK AND GOOD VIDEOS TINMAN ,,BE SAFE BUDDY

[@thebradleysoncatbirdhill6849]

Cannot wait to see your build on this! Just love that sound already!

[@j.chrisbeck7492]

Good Morning from Elkton Maryland ! I am off today n tomorrow....😁😁 I be tinkering on my "new" saws...

[@Buzz-vz2js]

Howdy from LaPlata Maryland

[@kyleferber1519]

Watching from Wisconsin, blizzard outside right now with lows in the negatives, I can’t wait for days like that

[@jasonmercer9962]

Lookin sharp in the Tuxedo shirt holding a Pro Mac 850. We need to send Mac Daddy Buckin a shirt like that to rock while cutting

[@mikepici5553]

Good vids brother, nice to see your a pirates fan

[@stuartramage5933]

Very nice saw tinman. Goodluck with the build friend. Don't mind helping another saw nut living the dream .peace

[@farmerjackson709]

Gotta love a big Mac

[@Finom1]

I am very excited to see the internal chamber close ups. Air flow Nija Tinman!!!

[@DavidArentz]

Good morning Tinman. Thanks for your videos

[@billgreene7456]

Another great clip!… and the shirt!!! This guy is great!

[@rchighfield1]

Those are as rare as hen’s teeth in my area as well. I’ve been looking for 2 years for a big McCoulloch locally. It’s all I expected and then some. Can’t wait to see what it becomes.

[@ml.2770]

The shear amount of hollow cottonwood Tinman cuts has me worried about his odds of finding a wasp nest one day.

[@tinmanssaws]

Lol they are out there!! Im sure I'll get lit up on video one day hahahaha

[@Sensei948]

@@tinmanssaws hello is the meteor piston good for the 372 xp oe saw? Can a 1-ring Meteor piston be attached to a 372 xp saw where there are 2 Epa Mahle rings? Of course, one group of 1.5 mm rings. Is the Caber ring included with the Meteor piston or do you need to buy it separately?

[@colepreston6149]

Hey tinman love the videos always learning some thing new here I'm a oakville Manitoba man and just starting to try my hand at some saw building

[@asgenkarlson2703]

Call me crazy, but that looks like EXJ chain to me. That's skip from what I can tell, not full comp.

[@ronsilva516]

That saw would give still or huskies a run for there money as is just needs a 32” or 36” bar and that’s all !!!!👍👍👍😎🍺🍺 watch out for the fires 🔥🔥 I live in Northern California in the mountains and the big fires is only 60- 70 miles away it is hot and dry up hear keep the porting up 👍👍👍👍

[@retiredwelder]

This will be a fun project. I think this saw is going to CRANK!!! I’m always asking buckin to run my dream saw the HOTROD homelite!!! As always WORK SAFE 😎😎

[@ScrewdriverTUNING]

That thing is really nice. I need to run one of those. 😁hope your having a great day my friend .!!! Great work 🦾🪓🎯🖤💛

[@tinmanssaws]

Mornin Billy. First time I've run one, they are strong saws from the time I've put on this one..

[@chriscuts1201]

She cuts eh? Scrolled thru all the comments and didnt see a "she cuts eh?" so I had to sneak it in. :-) beautiful and peaceful woodland there tinman! Thanks for sharing!

[@kenstogner2427]

I've never had a. Mac. Saw. I had a. Mac. Kart engine. 100 cc. It was a beast.

[@j.chrisbeck7492]

K100s are badass....pricey these days

[@kenstogner2427]

I'm. Referring to the. 60s. When karts were a little different

[@j.chrisbeck7492]

@@kenstogner2427 oh I definitely understand,. Karts were very popular, many raced on the streets in monthly or yearly events around here.

[@mountainman9024]

She cuts eh! Great video mate!

[@daninuesca3801]

What's up there Tinman?! Sounds like you got a slight air leak there..take care buddy! ALOHA everyone! 🤙🏾🤙🏻🤗

[@antthonymartin6003]

Keep it coming the videos are good and on point

[@simpleman4224]

Gonna be another beast! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

[@sanchezzz1]

Hey Tinman, was curious why you pull the cord when turning off the saw?

[@mikeanders7542]

I ran one of those alot back in the late 70s early 80s they were the best cutting saw on the market back then .they wouldn't last very long usually about 6 mos cutting timber and they woukd throw a rod !

[@audiemccall5332]

Ran them to lean

[@johnlincicum6390]

Those things will put a 28" with ease through Black Locust and Black Walnut down here in Illinois. I know a guy who has a 36" bar on his Pro Mac 850 and it's stock. Torque isn't a problem. LOL! I have 2 Super Pro 81's and a Pro Mac 850 and they aren't my biggest saws.

[@ericolson1923]

Awesome saw. Love ya videos. Keep it up.

[@johnarnettsways.8758]

Tinman that 850 is a ripper. Beautiful saw. Swap you a model 47 Mac for it. Haha. Enjoyed the video sr. Be safe and take care.

[@richr1870]

I haven't forgot about the 850 video. I pulled it out and it had issues I'm trying to straighten out. Peace man.

[@benredmond8271]

Thank you. My favorite channel!

[@loganwhite6403]

Man I got lucky today gotta catch tinman befor I went to work hahah awesome video an man that 850 it's one nasty machine even stock

[@andybecker2693]

Disclaimer: “Not to be used for any kind of wood cutting.” I love when a certain guy on KZbin always says that.

[@cyriljohnson9884]

17:02 i like that saw a lot. lol love the Videos tinman

[@Buddha-of8fk]

We tried one Mac in the woods back in the day. It would be good for firewood but it didn't compete with our Pioneers. Not enough power and definitely not enough longevity.

[@VK2FVAX]

Heh. You had fun that day. Good on ye.

[@gustavogartner3145]

Hola...soy de Argentina tengo una igual desarmada...se consiguen repuestos ?

[@sebastianleicht]

Eh tinman, who needs a electric guitar when he can roar that promac. 🤣🤣 Very nice video and a exciting saw! Can't wait for that saw getting ported!

[@jamesreynolds7930]

If you happen to watch a video with saws running with the sound off the cc always says music playing lol it's like they know it's music to our ears

[@ClintsHobbiesDIY]

All I have to say is WOW.

[@mikahakkinen5651]

that thing cuts very good

[@KainKustomGarage]

What a beast!

[@TheDennys21]

Yeah! Unlike McCulloch now.

[@HairlipButcher]

I'm very interested to see the difference between non-ported vs ported on the ol mac.

[@crperformancetucker5065]

Wish you had some hardwood like oak or ash. Be nice to compare cut speeds to something im used to

[@jimsworthow531]

Welcome; once you run a vintage Pro Mac, you don't go back!

[@GripFreak]

Why do pull out the starter rope a little bit after killing the engine? I noticed you do this often. Just curious...

[@davediesel90]

When the engine stops it kicks back on the starter and can damage it, pulling out the rope gives it the slack required to counter that. Its mostly on old saws though

[@williamdon3442]

Manitoba ehhh. Hello from Saskatchewan

[@tinmanssaws]

Hey buddy

[@wayne-wango-wever8393]

Oh YA!!! Sweet mac music!

[@myronparks3495]

I don't know if you have much hardwood there. I would like to see this saw in some hardwood if possible.

[@SUROBLEDEKchannel]

great sharing

[@zman8884]

You use opti-2 at 45:1 with all your saws mr.Tinsman? Thanks keep up the videos

[@carllewis8203]

I have a pioneer twenty what time of chain and bar is it supposed to have?

[@stevebankuti9336]

hi tinman...i am down in oz and just got myself a 1984 partner 500 chainsaw...runs great ...what muffler mods can i do for a bit better performance and cooler running ...muffler has baffle plate with holes in lower section...should i enlarge thes holes and open up exhaust port..cheers steve in oz

[@bnscholet911]

I’m curious as to why you pull the cord out while hitting the kill switch? I noticed it a few times.

[@tadghmaw7013]

Engine recoils (pulls back on) the rope when shutting off which can damage it over time and may then snap. Pulling out the cord means that there is slack for the recoil to take up 👍

[@jensenwilliam5434]

Thank you

[@davidmuntz1186]

Tin Man this is Dave from Tennessee. I love your Channel and watch you and Billy Ray every night. I really like the way you modify your power saws. Could you possibly put a saw together for me? I ask Billy Ray but I think he took it the wrong way or something. I would like a 36" bar on a strong saw. I'm 5'7" in height. I saw where you use a long bar to keep from bending over. I had 2 neck and one back surgery so I think the long bar would be good! Thanks friends.

[@Syncop8rNZ]

Call me strange, but I'd like to see a 110 and a 610 ported.

[@tinmanssaws]

I have a 650 here somewhere. Maybe some day!!

[@Syncop8rNZ]

@@tinmanssaws I heard that one of the differences between the 610 and the 650 was the 650 had better porting.

[@cliffjohnson7960]

Hey Tin man you're buddy Bucking Billy told me about you l try to catch you between watching him .No favorite guys but l love what you do l have a lot of questions about what you do.l would love to send you a couple of saws to warm up.Is that possible.What would you suggest for new Farmer Tech blue thunder 660 saws love used 2 of them for fire wood. Shoot me atx TtylCliff

[@justinweaver8787]

Love it.

[@Thetreefella]

DoooooooD 💛🖤💛🖤💛🖤💛🖤💛

[@marcduclos9789]

Manitoba is dab smack in the middle of no wear. What dose the 850 weigh ?

[@pm270100]

not bad for an old bloke

[@frankeckert4901]

Chain looks full skip not full comp......good vid

[@phongnguyenthanh7215]

I made a video on how to measure mobin fire and death with a vom meter

[@mikeremski2102]

That's "-30C" not "-30F", eh?

[@elizabethreed2945]

Gotta love nice afternoons. Is that an Indian Larry question mark tattoo?

[@tinmanssaws]

Yep it is.

[@jonathanhall136]

👍

[@TheDennys21]

McCulloch, Jonsered, Homelite, Dolmar, Poulan, these all used to be powerhouses back in the day and look at them now, a shell of them former selves, it's really sad.

[@cormacbailey775]

@@iffykidmn8170 husqarna bought Jones out way back

[@kevinc.8869]

Hey Tinman is a Pro Mac 610 a good candidate for porting?

[@tinmanssaws]

I dont know I've never done one.

[@kevinc.8869]

Thanks for the reply.

[@eddyarundale1566]

👋

[@BRKS-fj2jt]

Nicely dressed for the occasion

[@jasonreese4824]

Tinman can you turbo charge a chainsaw

[@robertdillon9989]

Some rotten soft wood eh ?

[@oscarmars8398]

She cuts ehh

[@tinmanssaws]

Eh

[@joshsweet5373]

Well since all I hear from you is buckin buckin buckin I think I'll unsubscribe from you and just watch buckin instead...see ya