MAIL CALL!! ABSWERING YOUR CHAINSAW QUESTIONS!!

[@bigmoustacheal3295]

Your knowledge sharing is much appreciated! By the way, I watched Buckins's video today where his running the Macs that you and Ironhorse built. 👌 👏 👍

[@tinmanssaws]

That was fun to watch, that little sp70 was fun to build

[@thebradleysoncatbirdhill6849]

You are in your shop....It's freezing cold and you can see your breath.....And it's late at night....Nothing says passion more than that!💪

[@tinmanssaws]

Passion or stubborn lol

[@gunterbecker8528]

Tinman u the best 😊!

[@DrewWalker-e9v]

Thanks for the information Tinman. Also cleared the SE - XP question up for me. I knew you were the guy to fill in the gaps with that saw. Thanks again my friend 👌

[@robertsimard735]

Love the channel. Thanks for sharing.

[@tomintexas817]

Jordy port the 385 yourself I've ported 4 now with Tinmans knowledge 3 200ts (and johns custom saws knowledge) and an 026av old man firewood saw getting a 046 red lever ready for build

[@Magoot2456]

Dude my very first saw i ported was my ms460, had more balls then brains and probably should have ported my 026 first...buuuut thanks to tinman and ironhorse it turned out to be a complete ripper! :)

[@tdawg8605]

Give a person a fish, they eat for a day, teach a person to fish and they eat for a life time. Thank you for teaching us to fish...😊 especially with a chainsaw...😂. Taking builds is like fixing a buddies saw all of a sudden it always your responsibility if the saw stops working even if its 5 years and 100 cords later..😮. TC Mahalo Tinman 🤙🤙🤙

[@camrynrhodes798]

Thanks again. You are a kind person 👍

[@JourneyOfIdleHands]

You are such a gem Tinman. Sharing knowledge both on and off screen. Thanks to you I’m well on my way with porting my first saw - MS260 with a dremel (you may remember the email).

[@joecasatelli4825]

Keep doing what you do

[@robertblacksmith4355]

We are having a "Taylor Swift" weekend in Vancouver ! $$$$$$ Great "Man Cave"

[@itllkeal]

Nice tip on the SE tips. Thanks

[@aaronpowell4885]

Great talk! Christmas snuck up on me this year.

[@randymorris8371]

Thank you for taking the time to answer questions

[@martyrutter3630]

Lots of good comments and answers, your channel is doing just fine my friend ♥️👍

[@bradleyholewinski5635]

Thanks for all you do!

[@Julks1990]

lol I volunteer myself for a give away saw Tinman, your one of the reasons I’m into saws and started my KZbin channel. Thank you!

[@davidvankainen6711]

Thanks Love ya from MI USA.

[@boblapalme77]

Great as always!

[@mattw5729]

Life is not about waiting for the storm to pass, it's about learning to dance in the rain.

[@65895555]

You better dance faster in a blizzard!

[@wayneharper87]

I built my 390xp with the hyway bigbore kit, makes it 99cc, u will need to grind on the cases to allow clearance for the piston, really really boosted the power then i went and ported it, it ground ok no chips so that was good, i have a 394 im collecting parts for, cant wait to get bearings and a clutch cover and ill have a complete saw, good luck to anyone doing a 390 bigbore it was a fun build

[@normanc5706]

Hi, I will be interested on your ideas on what can be done to 254XP's simply to improve performance. I have six of these saws so it is obvious I like them.

[@bogdan77z...]

Hello! I have a question, if I put 3 compression segments on a 036, will there be any difference?

[@NickTaylor-lm1lv]

Man it be nice to have a built 395 with 42 inch or bigger. I find myself more here lately on 7 plus feet maple stumps and my little 500i gets em done but I just don't like the stress on the saw.

[@steveriggenbach90]

This weather stinks. Brings back memories daughter and Santa. Great memories.

[@edlafond1]

I had a clone saw that wouldn't tune with any of the knock off carbs that I tried. I broke down and bought the OEM Walbro. The difference was night and day. I'm a believer in the factory carbs from stihl and husky now.....they are worth the extra money.....might even save your saw

[@brendenleach407]

I have built a ms 660 opened up the transfers and put the iron horse pipe on it for slabbing I have only tested this saw out it seems to be ok but am thinking about changing the port timing would you recommend doing that for a slabbing saw and what numbers would you stick to?

[@tinmanssaws]

Keep the exhaust roof low, keep intake timing below 160 total opening should work.

[@brendenleach407]

Thanks mate. So don't touch the exhaust? This has a lot of compression it pops the decomp every other pull

[@Dylanmccutcheon747]

winters hitting here on the east coast to tinman!

[@roberthodgins253]

Hey tinman. I got a question for you.when are going to finish the p 42 pioneer?

[@tinmanssaws]

It's getting there, but I'm not sure when.

[@stevetheriault4164]

WE GOT 100 CM OF SNOW IN ONTARIO CANADA IN ONE DUMPING

[@boyfowler6078]

Do you have a 346xp? Ported one? Have any red max chainsaws?

[@tinmanssaws]

No, no and well no.... lol

[@LukeScottNelson]

I'm building a Stihl ms661

[@brandonf1226]

A041 mount

[@waynethedukelamont2078]

Hello from PA, it’s been a while. Hey , I broke the oiler button on my mcculloch sp80, anyone know where I can get one?

[@tinmanssaws]

That's a good question, mac parts are getting scarce.

[@AndrewMarsch]

Tinman, where in MB are you?

[@tinmanssaws]

West of winnipeg

[@BenKickert]

First!

[@BobPeterson-q6e]

I need a sp125 mac cylinder re plated do you know of any body thanks

[@kurtsteele5587]

How's the Tinman and family

[@mackieb6989]

Yeah brother, I’ve been shovelling since yesterday 4 times yesterday 3 times a day 😂😂