I DID MY BUDDYS O28 WOODBOSS ON THE BACK TAILGATE OF MY TRUCK,NEW CRANK SEALS,FUEL LINE, CARB KIT,SPARKPLUG FUEL FILTER,CLUTCH SPRINGS, DRUM SPROCKET,AIR FILTER, SHARPENED HIS CHAIN HE WAS AMAZED ,LOL STAY SAFE TINMAN
@olafvidar93152 жыл бұрын
You can do it Tinman. You've got the entire Buckin Army behind you!
@williamnorton50972 жыл бұрын
Try grinding the end of your socket to a nice square edge to get the most hex on that clutch
@Neighborhoodgo2guy2 жыл бұрын
That's exactly what I did with one of my sockets for this reason. Typical on almost all Stihls.
@jasentonguepowersaws42062 жыл бұрын
Love the attention to detail. I’m the same way. No such thing as good enough!
@codyroger95812 жыл бұрын
That upside down dog on the 038 is messing with my ocd lol
@aaronpowell48852 жыл бұрын
Great tips and warnings about those small seals👍 free all and aerokroil are the 2 best penetrating oils I've tried. The g660 pro I've got has a carb that says Walbro, don't know if it's real or not but it runs great, tunes easily and seems to hold it pretty well! Definitely ready for your farmertec build, as I've been thinking about ordering their g372 kit aswell!
@roadie58722 жыл бұрын
I’ve messed up a few seals. Hope all is going good with the family keep up the great content.
@mcporter03 Жыл бұрын
Do you know of a bigger jug/piston set for that 038 mag? I’m looking for a bit more power from that old work hose. I used mine on wild fires for a few years, like the rpm’s from a Swedish saw, but my ole German work horse got the job done ✅
@ianrobertson46162 жыл бұрын
Stilh still made the 038 magnum into the 2000's it was marketed more as a farm saw and they made them in Brazil, my dad bought a brand new one in 2001.
@jeffreyrubish3472 жыл бұрын
Very timely. Gotta do this on an orphaned Jonsereds 49 SP.
@justinweaver87872 жыл бұрын
Great tips on the seals thank u sir have a great week.
@toyotagtcoupe8487 Жыл бұрын
Great tips Timan,thanks pal
@johnwallner3012 жыл бұрын
Nice video as always! If worried about the bearings being sticky would like to remove both seals and check first I would think, just in case.
@Neighborhoodgo2guy2 жыл бұрын
Do the circlip ends need broken off on the highways? They make it real easy to install and take off with pliers.
@joshlake80532 жыл бұрын
I have a old ms 290 the heavy one. Love it
@cynthiahoekstra72122 жыл бұрын
Thanks for the information on the differences between the various 038’s. Stihl and their numbering system still confuses me. I understand CC’s , but to be an 038 and have three different displacements is odd.
@jeffreyrubish3472 жыл бұрын
I agree. I guess I don't speak "Stihl."
@famasmaster20002 жыл бұрын
Good video my friend. Very interesting 👌
@sebastianleicht2 жыл бұрын
Cool Vid, Tinman! Am I wrong or are your Dogs mounted upside down?
@justinp76872 жыл бұрын
Those are tough little seals did a few 028's a while back took hours to get them out.
@gregritter3772 жыл бұрын
Hey tin man have you ever heard of creepy oil it’s the consistency of a lighter weight oil than three and one and it has the ability to creep its way down through the threads really well you might want to check in on getting a small bottle of that or you could put a drop of oil on the threaded portion of the crank or clutch and it might help before you go using heat on it
@mariokramaric41299 ай бұрын
Hi, I need a little help with the Stihl 038 AV, I'm wondering which is the thread on the clutch, left or right. Thank you
@robertsmith75802 жыл бұрын
I don't like sthil chainsaws alot but I'm down for old Husqvarna 372 chainsaws all day long
@nickywalsh84922 жыл бұрын
Had the siezed clutch issue on a 038 fb, for seals. Tried 3ft pipe lever on a ratchet or air impact or both...but wasn't easy due to that shallow fit on the socket. Probably used mapp torch as well..
@jimc14012 жыл бұрын
I have a 045av rebuilt it in 1988 and again in 2007 now i'm to old and weak to pull that beast fast enough to get it started .I now use a husky 61 practica ,nice saw but not near the power of my 045 even after it was ported for fire wood cutting. It can hardly pull a 20 inch bar in fir
@exoticmanzanita Жыл бұрын
Thanks brother
@jamesgoss73672 жыл бұрын
use a 50/50 mix of acestone & atf the best thing ive ever used 🙂
@nathonquinton93972 жыл бұрын
I had an038 super and it was a good saw. Had tons of power and torque it was very slow or at least it seemed very slow
@amd65ak472 жыл бұрын
Just to add tinman I don't miss one of your episodes or bucking Billy Ray's
@tinmanssaws2 жыл бұрын
Thankyou for your support!!
@larrywarner93142 жыл бұрын
Correct if I'm wrong tinman those were supposed to have factory pop up pistons in them ? Mine did that's why I'm asking
@tinmanssaws2 жыл бұрын
I've never seen an 038 mag with a pop up here. Not sure how they came. Tbis one is bone stock for sure.
@benhowe55062 жыл бұрын
Hi there Tin man, hey love your work Brother! I have a quick question for you. I've got a old Pioneer saw and a very heavy 100cc saw and wanted to know what you think of them and who bought the company all those years ago? It's even got a glass fuel bowl on it. Take care 🤠🤝🇦🇺
@powersawtomfoolery67392 жыл бұрын
Please turn the dogs around! Lol. Good stuff brother!
@davidcarberry35472 жыл бұрын
i think im a hoarder,i have like 9 saws that most were junk , i rebuilt them now people are like hay can i buy one of those , im like noooooooooo, have a 38 super biggest i have thanks for that info
@230e42 жыл бұрын
Nice job on this video Tinman! You covered the finer points very well. You will get that clutch off. 💪
@karollis79722 жыл бұрын
Parts on stihl 038 will fit stihl 038 avs? Thx
@sandsock2 жыл бұрын
Would it beat the 361 by Stihl? I have a cord question on a Honda engine. It's not retracting quickly. I think it's just sticky and stiff. Any recommendations on how to clean it and make it softer. I tried winding it tighter and lubing the spring. It's the cord or the spring causing issues
@stephenneill26214 ай бұрын
The diameter of the cord might be too big causing it to be stiff
@sandsock4 ай бұрын
@@stephenneill2621 I can't even remember how I fixed it. Washed it or replaced it
@thomasherbert57902 жыл бұрын
Why are the bucking spikes on upside down
@colvinwellborn2 жыл бұрын
I've been wondering on all of these 038 videos... the dogs are upside down right?
@roadie58722 жыл бұрын
Thanks!
@tdawg86052 жыл бұрын
Sealed the deal...😆🤣😂. Heat gun and penetrating oil that will free it up. TC Tinman Mahalo 🤙🤙🤙
@tomnielsen64392 жыл бұрын
I would use a deep well socket that fits the clutch and use downward pressure and hammer it off.
@radosmalidzan8465 Жыл бұрын
Kako je nastelovan karburator, koliko je odvijen H i L saraf ?
@codyroger95812 жыл бұрын
The 576 is a beaut.. just heavy..
@amd65ak472 жыл бұрын
I think the best thing for still is to go back to the o38 Magnum style and weight and durability cuz they'll be outlasting the newer stuff when it falls on its face
@tammotenter32492 жыл бұрын
I have had a saw not very long ago that had a bees or a wasps nest in the exhaust port
@tinmanssaws2 жыл бұрын
I had one like that a couple years ago.
@wrstew12722 жыл бұрын
Motoseal? Chainsaw shop exclusive or is a newer product that I have not heard about yet?
@aaronpowell48852 жыл бұрын
Permatex makes it and probably other brands aswell. Available at most auto parts stores.
@yxzify2 жыл бұрын
Have you already tried to remove the clutch with an impact drill working against the compression of the top end? Regarding shaft seals: I use small drywall screws and put them in the brass of the seals. Then, pull them out on the screws with pliers. Great vid! Love your stuff and good luck with that clutch.
@leonardobatistarocha79562 жыл бұрын
The Lumberjack Jackyl Composition: Jesse James Dupree Ha haaa I was born in the backwoods Of a two-bit nowhere town Fathered up some rock 'n' roll (baby) So your mothers could boogie down I ain't whistling Dixie No I'm a rebel with a groove All around the world the go 'round and 'round When they dig on my new stainless steel sound oh yeah I'm said a lumberjack baby And I'm gonna cut you down to size I'm a lumberjack now baby And you're the one you're the one that gets my prize When you hear my motor running You know I surely be coppin' a rise Oh! So I'm gonna crank it up down the alley and jack it Woo I'm a lumberjack now baby I'm a lumberjack now baby I'm a lumberjack now baby Ohh I'm a lumberjack now baby But I ain't jacked my lumber baby Since my chainsaw you (Oh yeah) Ha haaa Whether you like it or whether you don't woo That's the way we like it
@philipschlesinger65112 жыл бұрын
I have a 038 super that I would turn loose of.
@edwinladshow57912 жыл бұрын
Just weld a socket onto that clutch Lol
@MotoLife541Ай бұрын
Your original 365 muffler mod waa a little fugly lol