TINY drone that ROCKS a GOPRO!! SPACEWOLF flight review

[@UAVfutures]

umm yeah intros and stuff lol link to drone - PNP -bit.ly/PNPspacewolf140 they changed the motors since review and I no longer recommend this unless it has the 1506 motors Frsky BNF- bit.ly/frskySpacewolf140

[@tschengtscheng805]

What batteries would you suggest with this one? 4s 800mAh?

[@Federico_F.]

Yes the battery?

[@MrNeil270]

Hey Stu, can you do another speed test, I reckon you could top 100mph if you took the go pro mount off, this will surely reduce the drag?

[@tomhawk3424]

Hey Stu, can you recommend some other 1506 that would fit for this setup just as well as those that you have been reviewing? Cheers!

[@magicfpv6621]

I can't get enough of your intros haha keep it up and wow...a session on that little guy...wow

[@BrandonRodriguezBeyond]

You should review the XHover Win 2XL. A 2.5" that can carry a GoPro! Really curious to see what parts went into that quad.

[@GGWAG-45]

I'm gonna have to get one. I'd like to see what its like with different props.

[@TheJensenJohn]

Could you redo speed test without gopro mount?

[@702BattleBorn]

Great video Stew and Crew. You may have mentioned it but I missed it. Could you please include Battery used and average flight times in your review. Thanks again. Cheers.

[@bearbarnard750]

Thumbs up for me ,,, just got the baby hawk 3,,, love it ,,, wish it would hold a GoPro

[@FunFactorRC]

CTC reminds me of the oL Crocodile Hunter when he pounces on the downed quads. Get em Carl!!! Disarmed! Like a rodeo.

[@sigurd5453]

Would love if we could see dvr while ctc were flying. Great video

[@ralphyvazquez1471]

Wow that's really a fast drone. What a little beast

[@jd2606]

Great job as always fellas. Can I get the flight time on those 1506’s ?

[@tletang]

Thanks for the review! I'd love to see a sub 250g 3" build with a runcam split.

[@fromhelltoheaven232]

Cant wait till you review the aomway v2!!

[@nothingnew69]

Ya know guys I honestly don't watch for the products....I watch cause you guys are entertaining.

[@J_Renwick]

Stu, if you decide to create another budget build video will you consider a 3” build? Thanks.

[@ivanminer2534]

Interesting. Glad for CTC safety u found the vtx issue before speed test

[@tombstonefpv9053]

Nice review Stew, you got lucky there that your vtx didn’t fry. Can’t believe it went that fast with that GoPro mount on, very impressive.

[@swashed.]

I just now finished building into this frame, its a nice frame to build into, no idea how it flies.

[@dronereviewman9580]

This little drone is Amazing!!! I really want one!! GREAT REVIEW!! & GREAT FLYING!!. 👍👍👍

[@Jake-mm1cz]

Hey Stu ...! What do You Think about Doing a Blooper Reel every So Often ...! Nice Quad ..

[@dukejet6997]

Well done guys,,, BUT was a rookie move going out with a loose vtx antenna Stu. You knew it was loose from your "bench breakdown" video. And trying to do a speed test with the bloody great gopro mount on the poor little bugger was not fair.....

[@Gosuminer]

Came here to write exactly that. This camera mount produces a lot of drag for such a small model and the faster you go the more it distorts the measurement. Without the camera mount and with some higher pitched props this one could easily reach three-digit speeds. Securing a U.FL connector can be tricky. Hot glue can be a mess, especially with a VTX that gets as hot as this one. I wish manufacturers would provide holes in the PCB next to the connector so you can zip tie the connector down. Or just go with MMCX which is generally recognized as the superior solution.

[@bearbarnard750]

Duke Jet ,,, lmao

[@psydafke]

Duke Jet yep, moved to mobile to write exactly the same about the GoPro mount, WTF! And it’s not the first time either! Like drag is non-existent in UAVF’s world 😝

[@knapss]

bro the beginning was top notch

[@raymitchell2062]

Hey Stu wheres the AeroBot flight?

[@luca-qt2ss]

Is the furibee x140 better?

[@VdubSPAZ]

I think you need to retest it considering that you still had the GoPro camera holder on it.... That is so much like wind resistance

[@25hpboatracerman]

Love the work Stew!!! Attention The latest space wolf being shipped is totally different, can you re-review?Seems to have different motors 1407 3600kv, different VTX, different camera with concave lense not sure what the stack is now???RC escapes did a quick review on the new one.Why does gearbest send out good things to be reviewed then change them for every one else? Love your Chanel mate,I am a central coast flyer

[@gh75432]

It would be nice if you would talk about flight times a bit more when you review quads. IE: This quad flew for x mins when we used a x type / size battery. I realize it varies by battery / pilot, but even a generalized number would be very helpful.

[@kramersteensymes3523]

Looking at the specs it doesn't seem to have the xjb fc and esc.

[@zerverin9235]

Hi, so I am starting to get into fpv and I bought a eachine wizard x220s a Taranis Qx7. The receiver I bought was a Frsky X4R-SB. I soldered the receiver to the flight controller and when I plugged it into beta flight it was receiving a signal but then I some how ended up frying the fc. I ordered the same flight controller off amazon and re soldered everything including the receiver and I got no signal. I even bridged the bad where it says sbus to the middle pad like was done on the other fc and I get no signal from the receiver. Do u think I fried the receiver too? The light still comes on on the receiver but no signal what am I doing wrong? Thanks

[@allengerhard9513]

Will it connect to my flysky? Looks mean at 97 mph.

[@nomad8426]

Added to cart, my first three inch. Thanks Stu, keep up the awesome work. Where's Trev ?

[@decork2206]

Do you know if you'll be getting the 1506 motors with your order? Would love to know which motors come with the one your ordered when it arrives.

[@joelposthuma4473]

Are these 3" quads very loud? I am keen to get a quad that is not as loud as my 5" quad. I have had a few people get annoyed of the noise from my quad.

[@miniquadsmegafun3619]

Joel Posthuma they are not too loud but 2.5 inch is like stealth mode!!!

[@joelposthuma4473]

Are 2.5" quads a lot quieter than the 3" or 5" quads?

[@CopterPirates]

Pretty sure people that get annoyed from 5" noise are gonna get annoyed from ANY quad noise. Don't fly around people that don't like quads. Easy ;)

[@miniquadsmegafun3619]

Joel Posthuma yes they are insanely quiet and sound more like a toy than a quad... check out Albert Kim’s KZbin channel he’s like the king of micros

[@charleshenshaw9099]

Yes the 2.5" are very quite. Also 3s they really quick. I have never had complaint when flying my 2.5".

[@Yooled980]

Is that a Cardinals hat CTC?

[@ozrik2004]

You should do some head to head comparisons with other quads in the same class.

[@ktmjay9920]

1407 3600kv are same as XJB-145 ??

[@drewd423]

Surprised you didn't burn out the VTx with the antenna disconnected.

[@HuntAndFishExchange]

Liked the video - Can you send me a link for that Gopro Mount you were using on this?

[@johnsammons9788]

Good looking quad.

[@traderr3674]

What gopro mount are you using?

[@portwolf2293]

Where should I be looking for a portable inspection and exploration drone?

[@frommypointofview4421]

Jeremy Young DJI website/dealer will have you covered.

[@UAVfutures]

dji

[@marioman1982]

So was the VTX a let down in the end or not? Did you try it on 200mw?

[@dfipnf75002]

Bait and switch, looks like Gearbest is selling it with D1407 motors, not the one that is in Stu's review.

[@ironhrse78]

Battery and Flight time? Love the intros, Keep em coming👍

[@mrmikojo5738]

This thing has to be over 250g with the GoPro right? If not then I'll be setting up one like this...

[@jakegarrett8109]

Yes, the GoPro weighs a lot, so its going to be well over the 250g limit.

[@patrickcol]

Won't you have cooked the VTx trying to transmit with no antenna?

[@UAVfutures]

turns out it was fine haha

[@wickedreelz5028]

Yup some thermal paste and a heat sink on the vtx and you will notice FAR more longtivity out of them and less chance of cooking it when you crash and pop an antenna off.. It's a must do as he said, thermal paste is important in between the vtx and heat sink tho it will more it far more efficient at heat transfer.

[@jakegarrett8109]

I think usually, however, I sheared off an antenna last flight on a 600mW, and even though it took 3 minutes to retrieve it, its still working fine. Some might have protection like just enough resistance in a dummy load to not blow up, however I'm really surprised, because that 600mW will pretty well burn you after a minute if you don't have the props running.

[@2wheelremedy776]

Love these intros Stew!! hahaha

[@Faith_Family_Firearms_Freedom]

Is that a 20mm or 30mm stack?

[@scottambler1234]

Awsome as always don't know how you guys have the balls to go digging about in the bushes ect... With all the insects snakes and stuff over there😂😂

[@UAVfutures]

notice I let Cal get it out lol

[@rcpete7055]

Great vid Stew!#😊

[@2wheelremedy776]

bloody hell Trev where have ya been mate!! we bloody miss ya mate!!

[@UAVfutures]

bloody oath

[@dee1251]

how do i connect to my dx6i noob here

[@rl1412]

Were is GT!? Has anyone checked the PIT? With his old eyes, he may have gotten lost down there. Give me back some Grumpy. :( No offense Cal, your great too.

[@jarredhendersonmusic6905]

lol i bought those exact standoffs for my 5 inch, same color too

[@Chris-1974]

What I hate about gearbest is that they send out nice setups to reviewers and in the meanwhile change the specs for any aditional batches (remember the gt200 motor change or the x215 fc change) So after a positive review they change the good bits for cheap crap without telling you. Too bad in my opinion. Realy closely read the specs and compare to the review product!!! You habe been warned...

[@randomdaysy]

Just clicked through and they have downgraded the motors already

[@jamesgleason2808]

Yep I got this and the motors are 1408. Mother f'ers

[@jamesgleason2808]

I'll be sure to watch out for this before buying.

[@CliveFpv]

Loving the intros. Keep it up

[@djgrooverider]

Slacker trev,letting the side down.1st to give trev grief!

[@revsonsrc9573]

I ordered one 2 months ago never got shipped out ended up getting money back and picking a diffrent one. But I did build the x140 up with brotherhobby 1407 motors wicked fun. Would love to have you check us out over at rev&sons rc. Much love:)

[@nypal99]

Thats the problem with that HGLCR stack I am at the end of a HGLRC XJC145 kit build and of course that fugazy VTC antenna keeps coming undone with 0 flights?!! And now its permanently inop ! HGLRC do you read or watch these reviews pay atttention. Not impressed with them. Thanx for the review Stu and Crew!

[@peterfriedrichs2251]

Stew, what did you use to locate the drone? The "beeper?"

[@WickdPerfekT]

Peter Friedrichs a lot of quads have beepers on them you can use if you lost it.

[@peterfriedrichs2251]

WickdPerfekT As "standard equipment?" Are they activated with a switch on the transmitter?

[@WickdPerfekT]

Peter Friedrichs look at Project Blue Falcon's (RIP) video "Using ESCs for lost model alarm"

[@donaldtrump5489]

Get a matek super loud buzzer. Ignore the ESC beeper stuff that's barely audible.

[@UAVfutures]

a buzzer it is built in to the craft and activates on a switch on my radio

[@carpenterrick186]

Ok let's see a fair speed run without that big old camera mounting bracket!! Otherwise great review!!! I'm sold this is my new sub 250 Canadian drone. Cheers

[@bytesysed]

WTF. How do you have sooooooo much energy.

[@spacecowboyfpv5511]

crack?

[@bytesysed]

Space Cowboy FPV yeah fpv crack. Now way he could have so many $500+ quads hanging on wall if he was a real crackhead..

[@thebigdavester]

"Traveling lite today with no GT.." LOL

[@25hpboatracerman]

I mean 1408 3600kv

[@HollisRCLab]

cool drone!!

[@AliBFPV]

Reckon that woulda top a tonne without GoPro mount 🙂

[@ThePlaneguys]

I swear I was at that spot earlier today!

[@leviboy961]

You look quite a bit like my boss just a younger version lol

[@johncarold]

yes I like it.

[@rl1412]

Stu,....I think all this time away from your old job, is screwing with your mind. ;) Intros are getting interesting.........

[@Bjarkediedrage]

If you can make an even sillier intro in the next video I'll eat my drone!

[@donaldtrump5489]

1606 3600kv 4s on 3" flies like a 5"...

[@raymondwilliams6878]

Thinking about replacing the 1407s on one of my 3"ers. Which motor do you use and how efficient is it...How long are your flights on average and which battery? Sorry for all the questions, but appreciate any insight. Thanks!

[@ReubenRasmussen]

intro was interesting :P

[@natange1436]

No sound in space stew

[@UAVfutures]

that is what THEY want you to think ; )

[@FPVPRINTS]

I rock a session on my 2inch micro brushless

[@Umarluch]

By no means innovative :/ We've been constructing such drones here in Poland for quite a while using DemonRC Fury frame :/

[@donaldtrump5489]

....ask someone who doesn't even know what a u.fl connector is... Lawl

[@miniquadsmegafun3619]

15th :D

[@granger3979]

First :p

[@UAVfutures]

first first

[@jasoncampbell7485]

2nd!!

[@ch33ts53]

First to like