Tippmann TMC Air Thru Adjustable Stock

[@jamesandkendraholmes4608]

Everyone seems to forget to mention that the early models of the TMC won't accept this upgrade. There is no groove in the reciever for the new gas line...... good job Tippmann at awarding the people who pre-ordered one!

[@renpierce221]

Been waiting on this mod since the TMC came out

[@KevinPLane]

I’ve got one, working on driving the pin out - its a bear. Just going use as a Magfed only

[@hermediaht.morgan4735]

I‘m using this setup and it is super nice. It‘s not too long and just a little bit too thick to feel like an real AR15 stock, but scheiß drauf, it is awesome and a joy to use for magfed and tactical training.

[@brockreynolds2405]

Looks obnoxiously long compared to other air in stock platforms. Does anyone know how it measures up from grip to base of tank compared to other markers?

[@brockreynolds2405]

Huh. That's the about same as my Milsig ParaPro. I'm surprised that they are the same it just looks crazy longer to me.

[@cjfox2311]

At first, I thought it was pretty long too, and I'm only 5'1". However, I find that the length is never an issue because you can chicken wing the stock for cqc, and for mid-range, it mitigates recoil.

[@LolKing321]

It is 2 inches longer than the default stock fully extended

[@scratchcrafter]

I just picked up mine for the first time yesterday and while I love this setup, it’s a tad long for me I wish it could pop it in at least 2”

[@ashravenpb]

You should make a video on how to modify early production TMCs to accept the air in stock

[@marcorios4886]

My air thru stock gets here tomorrow!!!

[@jenslonn6046]

Great step by step instruction! Thanks alot!!

[@nvsnake1489]

So your arms would have to be long enough to drag on the ground to comfortably shoulder the stock.

[@chesssean]

once the TMC comes in black with an air through stock, i plan on getting one

[@chesssean]

I finally got it. It’s coming in tomorrow.

[@giulianzorzi7497]

sean whitmore how do you like it, I’m thinking about getting a black TMC as well. I was thinking about changing the shroud to a metal m-lock shroud from Killhouse Weapon Systems when I get one. The shrouds are coming out on December 10 I think. What barrel length would you recommend to get for the TMC also... I was thinking of getting a 14 or 16 inch barrel.

[@chesssean]

Giulian Zorzi I like it! If you wanna run a bigger tank, you can, but you’ll have to ditch the stock. But the fact that the tank is at a higher level than normal I really like. I run the CP two-piece 14 inch barrel. I like it, because it’s already got a long profile (especially compared to my Empire mini GS).

[@giulianzorzi7497]

sean whitmore thanks! I wasn’t really a fan of the air thru stock anyways. I thought that a dmr setup would look cool with this gun so I might go with a 16 inch barrel since the shroud I’m gonna get is a decent amount longer than the standard tmc shroud.

[@kylepn5223]

Im concerned about the new length. Where would you say the shortest length of the air through stock is compared to the original stock? Equivalent to like to 3rd or 4th position?

[@2talltv155]

Now I will get on lol. I wasn’t going to get it because of the air through grip but now I’ll get it

[@ralilpercival21]

Thank you for show me how to change it

[@Ichiashi]

It looks to long with it on there but it is cool that the tmc now can be run that way.

[@jeffwhaley3158]

Considering getting one myself

[@KillstreakPB]

Dayum that's long as hell

[@maskedmanzb626]

I love it and want it I have been waiting

[@MessiHair]

Looks like it adds too much distance between myself and my scope. Thought it'd be more close to the body like other markers.

[@adamska2012]

what's stopping me from just running a 20oz and just using that as a stock without the other stock parts? is it a strong enough connection at the stock pin?

[@ashravenpb]

you could do that, but it would allow liquid Co2 to enter the marker really easily. If you're using Co2, you should have it on your back and connected to the marker with a remote line

[@RubyBirdd]

Its very long but im buying that shit immediately

[@marcorios4886]

That's what she said..

[@BakiSenshi]

Convenience vs aesthetics I prefer to run a remote line than take away from the look of the marker

[@paultabet4680]

BakiSenshi remote line is way inconvenient. You have less motion. Its hard to switch hands, and if you run a pistol. You have to unplug the remote to run it. With the air thru stock you can just drop the gun and go

[@A-G-F-]

they should put this on a V2 TMC

[@shiftyshooter9218]

Just got one and set it up myself. How many mags should I expect to get out of a 13ci tank??

[@playboymac]

4

[@thearchangel8510]

Now that is how it should have been made....When is Tippmann gonna make an FSR model?

[@ashravenpb]

If you want an FSR ready air in stock magfed marker, just get a Tacamo Vortex Pro

[@cole8775]

englerpaintballguns-com.3dcartstores.com/TMC-to-Zeta-Adapter_p_789.html

[@czhusky]

Any idea if this will fit the stormer elite?

[@randydowtin1365]

Do they have one for the Tippmann Stormer

[@TransistorBased]

I want to, bit it's too long. Any ability to peek around corners is gone.

[@bradspencer5547]

Does the air thru stock work with the .50 cal version

[@VendettaPaintball]

Could you guys do a shooting video on this?

[@trustmeim2068]

does it work with old serial numbers?

[@marshallmacdougall8152]

Can I use it on the older/first models?

[@nosman123]

when people come in to play paintball. Do they put there gear on then sign in or sign in then put there gear on?

[@ashravenpb]

most people will wear a t-shirt and shorts and just put on their gear over what they're wearing in the staging area/safety zone. At the end of the day, you can just take off your jersey and pants and not worry about paint getting all over your car

[@americanmagfed4756]

I have this one and it's great but I want to get a paint job on my gun. Do you or anyone know someone that can help me out. Looking for a metalic green paint job

[@cjfox2311]

Airthru stock adds a lot of length to the marker.

[@bonaconlodoset9264]

my sock dosent lock into position

[@delanoschepers1561]

Can i put this on my stormer elite ?

[@alexsanchez3587]

Dose any one have a tmc elite with the 15ci than can show me pics while being shouldered

[@SWA7Team]

Will this fit 30.5 ci 3,000psi?

[@robertocantu5931]

Does It Suck? Ep.?

[@mikeceebo8611]

Can you still use this stock with a remote tank? If i ran out of the small 13ci bottles.

[@MrMexi-oe8eq]

No the 13ci tank is what holds it on. The bottom piece of the stock is just to ajust it back and forth. You can just take off the stock and the bottom piece and use a larger tank as the stock.

[@franciscoponsleon8438]

That air stock it's only foe 13ci tanks or it's compatible with bigger ones like 17ci?

[@marcorios4886]

It works with the first strike 15/4500 half pint tank. But adds some length

[@noisy1085]

They did it yes 😄

[@sealclub9092]

I made a video on my other account (KrisEhh) about unboxing and installing this stock, and I never received the little plug for the handgrip where the old Asa used to be....emailed tippmann and they never got back to me.

[@dylanc7003]

Seal Club the plug comes stock with the asa in the handgrip configuration. Either you never had it in your marker or you lost it.

[@sealclub9092]

Dylan Corkum I never received it though along with a few others that I know...

[@dylanc7003]

Seal Club oh i misunderstood what you meant. I thought u were talking about the small plug above the handgrip. Thats bullshit, tons of grim will get in. That holes massive

[@logansmith9437]

looks terrible. They should have made the ASA drop down below the stock, which would shorten it and lower the stock so you could actually use the sights.

[@logansmith9437]

@Dontevenask Garcia as you turn your head completley 90 degrees to the side and press your mask as hard as you can against the stock. Its no better on an m17 or t15 but with this design they had the option to make it a drop down and didn't. Your eyes should be able to stay level when you are aiming.

[@nathanieljacob9462]

I hated it... I even spent the extra money and bought it with the air through tank. I would only get through 4 maybe 5 magazines and be completely out of air... Now I’m searching the internet for individual parts to change it so I can run a remote line. Wouldn’t waist the money!!

[@reapersmagfed1837]

Dont like it looks to long but great video like always keep it up...

[@Apolloisbest]

Can you take the swinging part off and just put on a big ass tank and use that as the stock instead of that tiny ass can?!?!?

[@carlosvelazquez7406]

Just have a plug made for the back and run a tank through the asa way better

[@matissbrants2625]

It looks good but why am I paying 85$ for just a stock ? It way to expensive

[@DaVinnyBomb]

My tmc is too old to accept this upgrade 😭

[@QandA26]

Dude its so long

[@DryTEKGI]

Remote line, all the time

[@edgarbosques7714]

Please people put it against your shoulder to see how it looks! Really is it that hard!

[@gannonrodriquez7775]

I’m a dirty pony!

[@littlejbeats271]

It should be compatible with 12 gram Co2 cartridges

[@Julius11111]

Nah bro are you serious 💀

[@littlejbeats271]

@@Julius11111 Yeah i is a quick eject with a handle to slam it load 4 you get 4 mags 1 cart for a mag add a shotgun like feed to load the carts and it auto ejects em when the handle is turned and there you go bro ive put thought into a 12 gram co2 cart version of this

[@captainmidnight4262]

I have short arms... no bueno.

[@bunbunson27]

I rather run a remote line on mines lol

[@michaelbrown8949]

Shut up and take my money 👍🏾

[@omarestrada1195]

It’s kool but I just feel it longer

[@kobigreyson]

Hi

[@theram1357]

looks way too long compared to original