TIPS

[@asaldana512gtx]

mrpete222 I am a young machinist (24 to be exact) from central Texas. I was introduced to machining about a year and a half ago. I work in the tool shop for a plastic injection molding facility. And have to say thank you for all the knowledge you share with us. I knew absolutely nothing about this industry, watching your videos have helped me tremendously. I now operate a mill and lathe efficiently and a litttle bit of surface grinding to make chamfer tools, just started the CNC. Couldn't have done it without you THANKS MRPETE222!!!

[@mrpete222]

Thanks for watching--I am so glad to have helped

[@shaggyda2758]

Now this was a 'good read', its very nice of you to take the time to make a nice comment. I think you'll go-far.

[@mbs1234567]

asaldana512gtx the man has a lot to share and in my opinion there should be nothing but respect and admiration. Cheers mrpete

[@mrpete222]

Thanks for watching--glad I helped. I liked that movie

[@mrpete222]

Thanks for watching

[@rodwright225]

Thanks Mr. Pete 😎👍👍 brown and dull Love it

[@1889michaelcraig]

I bought my very first Mill yesterday. Garvin #3. 1909. All of the Machinist knowledge I have is because of this man. Keep the videos coming Lyle. Thanks!

[@mrpete222]

Thats great--hope you enjoy it. Thank you for watching.

[@robingibson7503]

I'm a retired Land surveyor and retired Volunteer Firefighter. Looking to find something else to do. Always have been a do it yourself kind of guy. And was thinking of this as another profession to get into. Have a 1947 Southbend lathe. with all kind of goodies. Your teaching is very inspiring andd encouraging. Thank you very much!!! God bless you Sir.

[@mrpete222]

Thanks for watching--have fun with that lathe

[@akbychoice]

No idea why there are thumbs down, I learned things and enjoyed it as well. Thank you.

[@wallyhumsford2443]

As the English would say - Brilliant!. Why would anyone thumbs down? Video, audio, instructions and logic are all clear. For us newbies lots of ancillary info - use a dab of oil on a 'dry' cut - use a chip brush - don't stick your fingers between hard and sharp places - turn power off when changing setup. Also demonstrates informative use of additional tooling. Thank you!

[@terencekreft482]

I have always been fascinated by watching people who do their job well, doing their job. My first job after college was in a food factory where they had a reasonably well equipped machine shop, I spent hours in there 'consulting' with the fitters and just watching them repair and replace machine and tool parts, nearly 40 years later and I still get pleasure from this, so thank you for these videos.

[@RonaldLAbbey]

I remember as a kid thinking bolts like this looked old fashioned, & out as date, even though my dad (he was an aircraft machanic), & Mr Barton (my metalshop teacher) explained the reasons & advantages of these fasteners. Skiping 45 years to the present, now I appreciate these things, I once dismissed as no longer relivent. Their actually quite estasicly beautiful. With time comes perspective & taste. When your young you want the newest things, but once you mature you see some of the old things were really the best designs. When I run into mechanical problems I still hear my dad & Mr Barton in my head telling me how to work out the solution. Thank you Mr Pete for all their memory's you've made me recall. Your still a heck of a teacher!!!

[@stxrynn]

Okay, I made some of these. Holy crap. 45 minutes Professor Pete?? Took me about 5 hours. It is apparent you have a a ton of skill, way more than meets the eye. Thanks for giving me a goal to shoot for. Mine look kinda okay, but not like yours. Those are beauties.

[@Buck1954]

I'm 62 and just now learning this stuff. I enjoy watching skilled metal workers. I've often wondered how one would make a bolt. I've spent my life drawing such things, some really large nuts for offshore. As for the thumbs down gremlins, they attack every video on You Tube. I think these gremlins are just unsatisfied with life and can not learn. Thank you for being a great teacher.

[@mrpete222]

Thanks for the support

[@stephenkent8903]

mrpete222 I wish to thank you for showing me just a little of what my father did all of his life. I have a love of collecting cutting tools which were made at the H.K.Porter plant in Somerville Mass where he worked. I have 6 total. They are metal straping cutters, bolt cutters and for tree limb cutters. They all have one thing in common very uniquely made bolts. They span his life from when he was 4 in 1916 to around his passing in 1979 a year after he retired or a little after that. You have showed me what I need to do or have done to recreate the nessesary bolts to keep them working. Thanks again you are a True craftsman!

[@mrpete222]

I think the HK Porter tools were very high-quality

[@stephenkent8903]

@@mrpete222 yes they were not sure if they still are since they are made in china!

[@212nailbender]

Mrpete, I hope you get this . Im new at this . Just bought a mini lathe, 7x12 hf. You are a inspiration and a thrill to watch . Thank you. Im 64 and just breaking into this. A pleasure to watch your finesse . And you crack me up, lol.

[@mrpete222]

Thank you very much I have over 1000 videos you know

[@normanfeinberg9968]

great video Pete.You are truly the "Johnny Appleseed" of the machining world.Years from now these young machinists will have fond memories of you and your wholesome teachings

[@JoesAutoElectric]

Don't let the trolls giving thumbs down worry you sir. You are a wealth of knowledge and your videos have inspired many of us. I was always interested in getting into machining, but until I saw your videos I had no idea where to start. Now, with a small shop set up in my basement I am finding small projects all the time and I am actually able to make it happen. The other day I made a set of QCTP holders for my lathe. Your video on cutting a dovetail gave me the courage to tackle that. Thank you and keep producing these great works!

[@edwardswinesburg877]

I took 4 years of machine shop in vocational school. I am a hobbyist making small tools etc. I have learned quite a bit more from you videos. Keep em coming.

[@mrpete222]

Thanks

[@deborahhenderson5090]

A joy to watch , my late father would have loved watching this video because he was a draftsman tool maker by trade as a young man and later on in life sold machine tools like lathes, milling machines, press brakes etc, it's a shame that a lot of these skills are being lost and not being used as much as they were I wish I had the space and money and expertise to make things like you just did , well done thank you for the nostalgia memory

[@RGSABloke]

Mr. Pete, you are like a fine wine, you just get better with ageing. Kindest regards. Joe.

[@commando340]

quite useful and i may make some in the future. just ignore the stupid comments . people who couldn't carry your toolbox are quick to criticize your work.

[@mrpete222]

thanks for that!!

[@wayneriedlinger]

Mrpete222, Love your videos. I am 62 years old, been an oil field trucker for over 40 years and my hobby is fixing up antique farm machinery at our local museum. I am doing a few things on the lathe so I guess I am an armature machinist. I watch many of your videos , you are an excellent teacher, very precise and informative while going through the steps. I also like how you keep safety a top priority. I've learned a lot from you. ( your never too old to learn). Thank you.

[@mrpete222]

Thanks for watching--its a fun hobby

[@tanksoldier9770]

Tubalcain you are one blessed teacher ,you would make an awesome neighbor ,I know someday GOD will have you working on heaven's gates ,may GOD bless ! Tank

[@mrpete222]

Thanks--how do you weld golden hinges?

[@tanksoldier9770]

With golden rods and lightning bolts . Thanks for all of your great videos ,I will enjoy and learn a lot from them this summer,thanks again Tank

[@stewartmackay539]

Another great instructional video. This man is skilful, knowledgeable, articulate and has a great sense of humour. Excellent.

[@mrpete222]

Thank you very much

[@bobveld4705]

Mr pete its people like yourself that introduced me to the machining trade 25 years ago and I have trained many machine apprentices and I just want to thank you for your dedication to the trade

[@rgrimm3173]

if I owned a lathe... I think I'd make square head bolts for everything else I own! that turned out really nice, thanks Mr.Pete

[@mrpete222]

Thanks for watching

[@sambrose1]

I first noticed TOT's rolling digital micrometers and now I've see you use them to. I love the things I have a modest tool collection but have 3 different rolling digitals. Thanks for everything Mr. Pete.

[@TonyUrryMakes]

Each time I’m about to flinch, you mention the safe way to do things and do them that way. I watch these videos because when I look at your hands, I can count to ten.

[@mrpete222]

😀😀

[@skyrunner8826]

It’s a pleasure to watch a craftsman.

[@all4vid]

Dear Mr. Pete Thank you for your videos. Your voice reminds me of my wife's grandpa, who taught me machining basics when I was a young man. That was 30 years ago. I often refer to your videos to be sure I still know what I'm doing. You're videos still teach me that I've got a way's to go. Thank you for putting your knowledge out there for us to learn from.

[@mrpete222]

THANKS

[@markthompson4885]

Rich i also learned machining from a school over 20 years ago... after school i work in several shop kepted getting layed off as the shops didnt have the work to kept there newest man on.. so i havent done machine work in a long time . watching this vids always make me remmeber something i forgot.

[@garyc5483]

Great job. Every time I see one of your video's I get the urge to go make whatever you made. Sometimes I do or sometimes it lights a spark for something else. Thanks for sharing. regards from the UK

[@mrpete222]

Thanks for watching

[@patroni99]

I enjoyed this video. My old lathe is only 6x18 - but plenty for making these square head screws. You're right, they do look much more professional. Thank you, Sir!

[@mrpete222]

Thanks for watching

[@tomherd4179]

I have an older SB 10K lathe and also like the look of the square head bolts. For the color I usually heat the item up some and dip in old motor oil, gets the part nice and dark/black. Like your work and helpful tips!

[@davidpetersonharvey]

I'm not sure why 130 people gave you a thumbs down. You're videos are fun and good instruction. Definitely a thumbs up from me.

[@mrpete222]

Maybe some of the rioters Have been watching my videos?

[@daqt6079]

mrpete222 I cannot imagine why anyone would give you a thumbs down. Thank you so much for your videos. I have learned so much from you and I just want you to know that I really appreciate what you’re doing for us.

[@gweliver]

I don't know if I'll make one of these for my Craftsman 12", but I really enjoy watching the process, like what I should be thinking about, order of operation, all the available choices of stock and why you choose mild steel. You are relaxed and not throwing wrenches, it helps me relax and enjoy!

[@alfredoeduardo1974]

Mr. Tubalcain, respectfully, you MUST have to host a T.V. show on Discovery or any channel alike. Young people from all over the world can turn your knowledge and wisdom into something profitable for mankind. Best regards from Guatemala.

[@mrpete222]

Thank you very much

[@nomercadies]

You're a good teacher Mr. Pete.

[@michaelmurray9154]

I don't know why when you made the comment, "you'll probably break your tool and pout all afternoon" it struck me so funny. I had a good belly laugh! Thanks Lyle!

[@davidpetersonharvey]

My mom and I laugh at the fun comments.

[@ShainAndrews]

This Tubalcain kid is alright. If he sticks with it he will probably become a competent machinist when he grows up.

[@charlescompton4495]

Now all I need is to get my lathe set up. Fine project and video, Greg.

[@mrpete222]

Thanks for watching

[@rfcarlson1]

Looks like you've acquired 4 mullet heads for this video. I hadn't heard the term since the movie "Cool Hand Luke" but it's a great description for someone that would take the effort to press the don't like button for something that's free rather than just stop watching. Thanks for the videos.

[@bulletproofpepper2]

Very nice. Looks more complete and that the person who made it mades the best tools ever. Stamp the tops with "222"

[@caahacky]

Brown & Dull - love it.

[@mrpete222]

Thanks for watching

[@rauldemoura2417]

Very cool Mr. Tubalcain. I sure miss the heck out working in a machine shop. I LOVED my work, and LOVED my Bridgeport Mill. (I wish we were neighbors, I’m a SPONGE for knowledge!)

[@mrpete222]

👍👍

[@Lupusharv]

Wish I had a grandfather or neighbor like you around to learn from. Thank you for the great videos

[@mrpete222]

Thank you very much

[@db13401]

Keep up the good work ..I was machinist years ago but I still learn a lot from your videos....

[@ron4378]

Thank you for your time, takes me back when.... Loved it then, miss it now!

[@paralleler]

Thank you for pointing out the hex and the square collets -- you help green kids like me learn easier techniques. Many thanks sir!

[@AustrianAnarchy]

2:18 Well, yes the head does have five flats if you count the one on top :)

[@mrpete222]

lol

[@merlinmagnus873]

Well, he did exactly what he said he was going to do.

[@gwheyduke]

Glad you posted this, I need one of these for my South Bend tool post. Of course I"m watching closely, it's as clear as mud and I have my glasses on too. Clicking over to ebay after this video to find me one of them 5-C collet blocks.

[@machiningbasics1729]

Thanks for another brilliant video as usual mr Pete ! Shame the dislikers don't appreciate your effort and skill

[@mrpete222]

Thanks for watching

[@donfulton5765]

MB- those who dislike these videos should''t be allowed to watch them. At 72 I don't get much out of other training films so there is a lot to know being shared and hopefully taking notes. Guess the dislike'rs just buy cheap stuff from China in a bag at the hardware stores, but then they don't what the item is intended for. Go figure!!

[@jamesrowe6389]

I don't do any of this type work, or have the equipment to do it, but I really enjoy watching the videos. To watch a true professional is amazing to me. Great job!

[@danbreyfogle8486]

That was so interesting I watched it a second time. Good stuff Mr. Pete.

[@mrpete222]

👍👍

[@awizardalso]

I did learn how to DIY heat treat metal from KZbin. I had to fabricate some metal parts to make a bracket mount for a larger gas tank, a hinge and a cross bar for a solo seat on my motorcycle. I used a small charcoal grill and funneled air from a window fan into the bottom to get more heat, when red/orange hot quenched the parts in used motor oil. then after they cooled down I put them in the oven at 250 degrees for 1/2 hour. Turned out pretty good.

[@mrpete222]

👍👍

[@TomHerd-vm4vf]

Needed a project, so I will be making one or two as well. It may have taken you ~45 minutes, but I know my time will be longer. Like your "stop added to the vise" for making multiple parts. I think your comment about negative comments posted might just be some people who are simply Negative by nature - everything is just no good for them no matter what. I have and will continue to watch and learn from you, and can not recall a single video that I did not learn or enjoy! THANKS!

[@mrpete222]

Thank you very much

[@eddiekawecki2510]

Nice little informative project. One thing I like to do when milling the four sides is to do the first 2 cuts 180 degrees apart and check my measurement or put the wrench on it just incase I need to take just a bit more off to avoid going all the way around again. Just my habit and preference. Thanks for the videos. Ed K. Cleve. Oh.

[@Kevin_747]

Awesome Mr Pete. I'm going to make a pair for my carriage stop but I will need to figure out a way to do the square milling on my milling vice in my lathe. Thanks for the lesson.

[@mrpete222]

Thanks for watching

[@chadhanson3431]

And thank you for all the safety tips you offer!

[@mrpete222]

👍

[@musaepadumbratus2326]

Mr Pete, thank you for the time you take to educate us. I am starting a fitter and turner course (at 40 yo!!) in the new year and these video's have (I Think) already given me a head start. Keep up with the great work, and thank you again!

[@mrpete222]

Thanks for watching--good luck with your new career

[@colinwarner7762]

Dear mr pete. just to say that my old friend used to say about nasty or ignorant people. they are of no consequence, also I am waiting for delivery of my first lathe a mini, I am getting on now but after watching your videos and others I am going to give metal working a go. its about 40 years since I worked at RollsRoyce Aero engines. on milling turbo titanium blades. I don't think its going to be easy but I am going to try it for a hobby, and for interest. thank you very much for your brilliant videos, please keep them coming. many regards, Colin. UK.

[@mrpete222]

Great--start now. Its never too late to play with a lathe

[@yambo59]

I really like having the fasteners that better match the original era and look of the machine, very cool piece of work - sometimes the details really make it pop as it were.

[@samuelcooke502]

I agree 100% - these look like original equipment stock - like they belong on the machine. Great job - nice idea.

[@mrpete222]

👍

[@alangriff1]

I agree these posts look so professional. A great job.

[@mrpete222]

Thanks

[@sjp52047]

I don't get the thumbs down. How bout just commenting. Your absolutely correct. These machines reproduce themselves, with a bit of human intervention. Regards, Solomon

[@bobvines00]

Thanks Lyle -- another great video! Now I'll have to go make some for my ~105-year old South Bend lathe to replace parts lost over its many years & owners. ;)

[@1musicsearcher]

Those are a great addition for the carriage stop.

[@davidpetersonharvey]

Those are so much easier to work when you have clearance for the wrench. I'm also planning to use the iron from an old d brake disk from my truck to make custom wrenches. The store bought ones have too much play in them. I just saw that I watched this before. I thought I remembered it. Good videos best rewatching.

[@mrpete222]

👍

[@billbussler3332]

I remember reading or hearing somewhere, and it may have been you that said it Mrpete, the lathe is the one tool that can reproduce itself. Oh I suppose a mill could too but it would be much more difficult producing the round bits. Another great video sir thanks so much!

[@paulkennedy5953]

Knowledge is power and power is knowledge in the machining business, good job well done.

[@mrpete222]

Thanks

[@nigelharrison2551]

I started my engineering career in 1967,in those days drawings were a mixture of imperial and metric.Most of the machines were of imperial calibration.Like the video,although I could mention a few things that you will pick up with experience.The milling cutter used was a slot drill and not an end mill,the difference being the slot drill is 3 fluted and the end mill 6 fluted.You can sink down or drill with the slot drill,but not with the end mill.Also when milling it is important to take out the backlash,although with such light cuts,you would get away with it.If you don't know what backlash is,you will soon find out,if you forget when using an end mill.Also on a milling m/c use the axis locks.Many more things I could point out but I don't want to nit pick.Keep up the good work.

[@ronpeck3226]

Not only do you show us how to use tools ....Apparently a few tools tune in to watch too! Thanks for your time!

[@roopr]

They do look very nice. Thanks Tubalcain!

[@stanburdick9708]

been looking for a new flange bolt project and here it is, ofcourse I dont have vert mill but do have a 1/4 in. mill bit so will just improvise on the lathe as Ive done before....thanx

[@ldiazmdiaz]

i get chills when you pass your finger across the metal shavings of the threads burs. Grad you mention to use a brush later. OK my new friend... i will subscribe.

[@tf1977sled]

Luis Diaz Thats because Mr.Pete is a working trades man and a hands on educator! As a consequence of hard work he has a nice set of manly leathery callused hands and fingers that are immune to chip damage! How dare you question a man with his experience and knowledge! And for christ sake what would the consequence be if he got a little chip cut on his manly finger? He would add more character to a life time of experience to those manly fingers! Pay no mind to these fancy boys Mr. Pete let them apply there fragranced skin lotion to them soft fingers and protect them from any masculine character. Maybe he can arrange some flowers or knit something useful.

[@christhomson8001]

I will defo be making a few of these for my lathe. Thanks Tubalcain!

[@mrpete222]

👍👍

[@toneault7499]

i so wish i could have found you earlier. you just make live ( and machining ) so much more interesting .. take care stay safe. tone uk

[@mrpete222]

I am very glad you found me

[@mrkimmystic55]

Lyle you are the Jimmy Stuart of machine works.

[@MrShaun1578]

This and AvE my favorite shop channels these two guys really know their stuff

[@mrpete222]

Thank you very much

[@carrichard]

I enjoy watching your ideas displayed herein. along with your very important SAFTY TIPD !!

[@ywiwar7872]

I'm learning so much. Thank you from Australia.

[@mrpete222]

Thanks for watching

[@rtkville]

Nice job Mr. Pete... I only have an Atlas lathe but really wish I had a mill! Someday???

[@frankmuller5649]

Simple things and how to do them right... essential and priceless... thanks for sharing your knowledge. I love all the remarks you tell yourself... puts a smile on my face every time. ;)

[@chbonnici]

First class demonstration . Thank you. Thumbs up.

[@mrpete222]

Thanks for watching

[@bradymcphail9690]

very excellent video Lyle! I'm a very new machinist, and I started very late in life. I feel like I will learn a great deal from you.

[@mrpete222]

Thanks for watching

[@probeteam9936]

Quickly becoming a lost art... thank you for the video... God Bless...

[@newstart49]

I must feel sorry for the thumbs down people. They must be the ones who must call someone to make or repair everything for them, since they won't learn do it themselves. I'm 65, and still have so much I want to learn, I need another 65 years.

[@mrpete222]

👍👍👍

[@donaldnaymon3270]

Nice work. Definitely looks better with square head bolts.

[@jeffryblackmon4846]

I enjoy and learn from all your videos. Those bolts look great. Thanks.

[@peterwill3699]

That collet block is perfect for this job,going to look for some.love you videos.

[@mrpete222]

Thanks for watching

[@plasmacutter1]

Hello from down under, just like to say i have thoroughly enjoyed watching this man share his experience and knowledge . Artisan blacksmith from Australia i have my own lathe and vertical mill alongside all my forging gear. Watching this man working with these machines has opened up a whole new world of possibilities., i have built many machines in my shop and in my work i am always looking for aesthetic artistic and unconventional methods of marrying hand made forged iron work with the creative technicalities of milling and machining. As in blacksmithing its nice to find that in the milling and machining world there is more than one way to achieve a desired outcome and get the job done. Best of health to you MRPETE, thanks for sharing your infinite wisdom with the world, ""--

[@mrpete222]

Thank you very much for watching and commenting. I'm glad you like the videos

[@Impuritan1]

Thanks for making this video. I've always liked the looks of a square head bolt.

[@mrpete222]

Thanks for watching

[@RyanWeishalla]

Nice quick project. Definitely a tight fit when under the head.

[@adamgall8960]

Thumbs up for calling someone a melonhead lol.

[@MrKidkiller159]

:)

[@gorillaau]

Adam Gall Usually I'll watch the entire video before leaving a thumbs up, but after the melonhead comment... thumb up there and then.

[@mrpete222]

Thanks for watching

[@Hui9697]

HA, me too plus I subscribed.

[@chrishill6276]

Jeremy Reeves me too. Same idea though

[@kellysweetman6070]

I like your videos. They've helped me with projects I'm working on with my little 6" Atlas. It's a great little lathe for my hobby shop.

[@mrpete222]

Yes

[@glasbrnr]

Great instruction that was clear and easy to understand, and your video work is high quality. First time viewer, and I subscribed. I appreciate your knowledge, the time, and effort required to made these videos.

[@cr2fabrication]

Mr Pete, love all your videos, always learning even at 53!!! I did a really quick and dirty stop similar to yours, one thing I should have done was use a 1/2-20 thread instead of the 7/16-14 coarse bolt I used. It's what I had on hand. At 20 threads per inch, it's .050" per rotation...

[@mrpete222]

Yes--20 is what I use in the upcoming project

[@joeworden825]

Thanks for the video. Using just your brain to machine something is getting to be a lost art.

[@JOEZEP54]

Great video. Very instructive, clear easy to follow. Nice job.

[@Daledavispratt]

We all have a melonhead lurking around, it seems. Thanks for another great video, Mr. Pete!

[@kevCarrico]

those look great -- good call (one takes pride in his work) -- smoke and chips... THANK YOU!!!

[@wildcat2488]

keep up the great classes .i'm learning so much teacher mrpete222 wish i had known you a lot longer .my hat off to you sir

[@jamesberlo4298]

Its amazing something as simple as that ,the techniques and work used to make them, and the beauty of it. Nice Work!