Tips for doing hardline trunk setups. Intro

[@cezardelatorre2107]

Question, could you run regular 1/4 inch airline hose instead of hardline?

[@squeakycleanair]

You can run anything you wish. Many people employ hardline as a beauty setup and to make trunks look nice.

[@tesla_3_performance]

Is there a minimum distance for bends to be away from the fittings that you'd recommend? For example coming off manifold to a bulkhead to pass through the false floor. Is there a minimum length for the 90 degree bend to be (aside from the benders capability) or is that not an issue? I currently have a few of mine at 2.5" 90s and I'm wondering if the bend itself is to close to the fitting; maybe I should extend the piece that is actually going into the fitting or leaving the manifold. So instead of a "stub" 2.5" 90, mark it xyz distance from the end to give myself a straighter section to put into the fittings. All PTC bulkhead fittings so that's why I'm wondering, not secure like the compression ones.

[@squeakycleanair]

Each fitting is different. Take some tube and experiment with distances and clearance. I stick to similar fittings so all my templates apply. If there is a major change i make new templates.

[@trevormorrissey2548]

Is it possible to plum your airlines using steel brake line and brake line tube fittings?

[@loens90]

Any link or website to order dot compression fittings ?

[@squeakycleanair]

Google is your friend :)

[@loens90]

@@squeakycleanair cant find everrything and i want to make shure is the right thing is it specific to hard line?

[@squeakycleanair]

Parker or swaglok are good

[@hulksmash_18ss]

Where did u get your hard lines from?

[@squeakycleanair]

Follow my other videos. You will know. :)

[@JA-sj3mb]

What fittings do you use to connect the 1/4" hose to the hardline? Compression?

[@squeakycleanair]

Ptc, its all mentioned in video.

[@JA-sj3mb]

@@squeakycleanair sorry I missed that part lol thank you!

[@squeakycleanair]

@@JA-sj3mb sweet. Holler if you got any more questions :)

[@808DC2R]

Can a 1/4 hardline fit to a push to connect fitting? Where do u buy dot approved hardliners? Can ss hardline fit my setup? I only need less than 3 feet I will mount on my setup to top of my trunk board.

[@CityHighKustomz]

Good Stuff! Subbed,👍👍👍

[@squeakycleanair]

Thanks for the sub!