Tips for Identifying a Camshaft

[@hankgorman9731]

This video was really helpful. You guys down at dyno cams rock. The hot stock clone I built still rocks 6500 rpm after 3 years a few valve set later tho. Which isnt bad with the run time it has

[@dynocams1006]

Glad you liked it! We're hoping to get some more content up for you guys soon!

[@dynocams1006]

We're about to start making videos again. Can you think of any topics you'd like to see us cover?

[@edsultan8699]

THANK YOU!! Just saved my build!

[@bstarnes514]

Hi Randy! Nice to put a face with the voice on the phone lol! You recently did an 03ss for me! Fantastic work my friend! I've got vids on my channel if you care to see what the engine is going on! 🤟 This vid was right on time because I obtained a built flathead with what looks like some kind of modded camshaft.... Thanks brother!

[@dynocams1006]

We're about to start making videos again. Can you think of any topics you'd like to see us cover?

[@SoLoCruizer]

@@dynocams1006 ducar upgrdes would be cool to see alotta people are running them now i still have the gov gear in mine but the throttle linkage broke so i had to jerry rig her up gov is dissabled now tho its runnung kinda jolty

[@NubsWithGuns]

I get the secrets thing but when I have one that has 2016 AKRA engraved on the back and it is 2024 what could possibly be secret anymore?ROFL the shop it came from only reply was "it's one of our AKRA cams from 2016" Err ok but no*** I knew that much. Unfortunately my friend that used to race gave me a box of parts he had left over and doesn't remember what the cams were. (btw both blocks are 196 Ducar, turns out they are more common here than I knew) Anyway thankfully there is guys like you to help. Thank You for the vid.

[@riamudanku1050]

Do the animal cams have straight cut gears?

[@TubeInspire]

Thank you!! 🍻

[@devinbryan9456]

Need some closer shots on the products being shown

[@dynocams1006]

Sounds like a disgruntled employee to me, Dev. hahaha

[@jimbright8194]

If I send you a cam from a stock Briggs flathead gas engine, can you guys grind it to a certain spec like a 95-3 to run in an alcohol engine?

[@michaelmilligan7291]

What the best cam for drag raceing

[@tattoosuri]

Sell ​​goods on shopee for Vietnam to use

[@dynocams1006]

Sorry for the inconvenience! If you wish to place an order, you can find the part numbers on our website and email them to [e-mail] for international orders. I hope this helps.

[@irepairofpc31familykartrac51]

I use the same caliper but I measure base circle first then zero the caliper and rotate the caliper around to measure full lift, the number on the caliper is the lift of the cam.

[@mjbodyworx7874]

Hi I hv a 2e Toyota tazz and I want to change the cam shaft to use from a Toyota 7afe will it work?

[@SoLoCruizer]

hey randy , wats the best cam for my ducar 212 btw its still running good 100%

[@farujianoruji3681]

Boleh pesan ga pak yg buwar balap

[@freemanguess8634]

Thanks

[@dynocams1006]

We're about to start making videos again. Can you think of any topics you'd like to see us cover?

[@spikemandan]

Any coupon codes

[@johnbecker5213]

no id numbers , builders secret bullshit you just want to be a pain in the ass!!!

[@jnate331]

I love small engine cams and others.