Tips for Installing RV Under-Glow LED Lights

In this video we discuss a couple tips for mounting LED lights to an RV underbelly. This is becoming more and more popular throughout the RV industry and we wanted to show how you can mount our LED strips to ensure years of use. In this instance we installed our Full Perimeter RV Under-Glow LED Light Kit on a 2020 Newmar Ventana 4369 Class A Motorhome. This diesel pusher has a tandem axle and stationary front generator mount. Our Dual-Zone Controller Module is powered via 12vdc and mounted in the House Battery Bay which is located behind the steer axle on the driver's side of the rig.
This installation uses our Full Perimeter RV Under-Glow LED Light Kit (Motorhome Configuration): www.boogeylights.com/full-per...
As for the mounting surfaces; we're using aluminum flat bar (1.5" wide x 1/8" thick): www.boogeylights.com/aluminum... as well as Aluminum Angle (1.5" x 1.5" x 1/8") for the generator mount.
Other supplies mentioned in the video:
Butyl tape: www.boogeylights.com/butyl-tape/
3M Adhesion Primer: www.boogeylights.com/3m-adhes...
3M Double-Sided Tape: www.boogeylights.com/3m-doubl...
Split Wire Loom (1/4"): www.boogeylights.com/split-wi...
This was an In-House installation done at Boogey Lights HQ in Florence, KY!
Call 800-847-1359 or go to www.boogeylights.com/contact-us/ to schedule your install today!
=============================================================
For more information about Boogey Lights installation resources please visit: www.boogeylights.com/boogey-l...
And don't forget to give us a follow!
Facebook: / boogeylights
Instagram: / boogeylights
Twitter: / boogeylights
Light 'em up and travel safe!

[@imdbtruth]

Great work! I enjoyed the video.

[@BoogeyLightsLEDs]

much appreciated!!

[@marlonmarlon3496]

Where are you located at?

[@BoogeyLightsLEDs]

We're located in Florence, Kentucky! (9000 Empire Connector Dr Ste B, Florence, KY 41042)