Hey guys! We wanted to show you our hallway renovation but it's not quite ready yet -so here is a quick video with tips for silicone around the inside of a window. Any questions let us know below :)
@sparks21096 ай бұрын
This video gave me confidence to do a. job i’ve been putting off for months. (Ripped out old sealant & worried about the finish..hadn’t considered using the moulding blocks). Thanks
@mountainbreezediy68026 ай бұрын
So great to hear this! Hope it went well!
@annegroves26485 ай бұрын
Thank you so much for simplifying this whole process and making me finally be able try this.
@mountainbreezediy68025 ай бұрын
So great to hear this! Hope it goes well!
@adayinthelife94722 ай бұрын
Nice job! I'm getting ready to do it. Won't there be extra silicone on the sides after pushing it down with the profiler? I doubt I'll get such a straight border. Wondering how to remove it. Did you use any cutters for it?
@mountainbreezediy68022 ай бұрын
If you start from the largest size of the profiler and work your way down- that way you are not removing too much silicone all in one go (which as you say can cause it to spill out the sides). I normally do 2-3 passes. If you do have any extra on the sides after doing this it will be far enough away from your silicone join that you can just scrape it off without ruining your nice clean silicone line. 👍 Any other questions let us know! Good luck!
@adayinthelife94722 ай бұрын
@@mountainbreezediy6802 Thank you for the explanation! I see some people use tape to ensure a straight line, but I'll try it your way.
@1.9.8.37 ай бұрын
i am renting and the bedroom windows are letting a big breeze in. so taken away the plastic trim to discover where the window offers up to the mullions there is gaps so expanding foam around then putting trim back on. its annoying knowing that window fitters dont put ant insulation around where it meets the brick. something that is expandable. now when the next breezy day comes along it will be fine also got to reseal outsidw the windows aswell
@hmmmmm26342 жыл бұрын
Absolutely brilliant. Thank you for an excellent video. Well done 👍❤️
@mountainbreezediy68022 жыл бұрын
Thank you- glad it was useful!
@isaacsharp38862 жыл бұрын
Very informative video , thanks
@mountainbreezediy68022 жыл бұрын
Glad it was helpful!
@SM-zx9mx9 ай бұрын
And what happens when it shrinks?
@mountainbreezediy68029 ай бұрын
It doesn't shrink like regular painters caulk because we used sanitary grade silicone- so you don't get any cracking or shrinking 👍
@Phjghh Жыл бұрын
Can I use it to fill hole in wall caused by nails?
@mountainbreezediy6802 Жыл бұрын
This type of silicone is not paintable so I wouldn't recommend it. You can buy paintable caulk in tubes that would work to fill nail holes but I would recommend something like Polyfilla for the best finish👍
@ANiMALFRiENDS_GOLDMAN9 ай бұрын
what about when it's really cold.......brrrrrrr
@AbhijitShrikhande4 ай бұрын
None of these videos show the top side of the window being caulked.
@mountainbreezediy68024 ай бұрын
It's the same process as the bottom just a little more fiddly 😉 if you have a specific question let us know and we'll do our best to help! 👍
@AbhijitShrikhande4 ай бұрын
@@mountainbreezediy6802 The issue is with the caulk gun not cooperating with the gun holder. Gravity becomes the enemy
@antb3334Ай бұрын
Someone didn’t clean their profiling tools
@mountainbreezediy6802Ай бұрын
Oh they are very well loved 💕
@skywalkermahone9219 Жыл бұрын
All I wanted to see is how you did the inside corners and you didn't show that :(
@mountainbreezediy6802 Жыл бұрын
Aw I'm sorry! I do it over two days normally- verticals first and then horizontal. That way you can get a crisp angular finish where the two meet. 👍
@skywalkermahone9219 Жыл бұрын
@@mountainbreezediy6802 excellent thank you!
@jaypaquet39538 ай бұрын
Haha out of 100 of these videos, maybe two will be able to actually do an inside corner perfectly without tooling. I don't tool my caulking and it's almost perfect every time.. Especially against a wood, concrete or vinyl siding, you don't want to have to tool it.
@jaypaquet39538 ай бұрын
kzbin.infoymEUBxYlxK8?si=iH6tmW5J-0mKFj48
@kevo5512Ай бұрын
Don’t really like the technique but I love her accent and voice it is so s…
@Jaywalker203 жыл бұрын
Hej wujek
@ritabosico33282 жыл бұрын
Great instructions but your music is awful
@mountainbreezediy68022 жыл бұрын
Thanks for the feedback Rita!
@carlfritz9496 Жыл бұрын
@@mountainbreezediy6802 I thought that the music was rather nice.
@ghengis4305 ай бұрын
Great video, awful music.
@mountainbreezediy68025 ай бұрын
Thanks for the feedback!
@macalahan3 ай бұрын
What waste of silicone!
@mountainbreezediy68023 ай бұрын
Thanks for sharing your thoughts! But probably less waste than having to do it twice when it goes streaky because of not enough product 😉