Tips for Taping and Inserting Your Sensor - MiniMed™ 770G System

Watch this video to learn about tactics you can try to help improve your sensor wear.

[@rickcrop8496]

Finally, this is a highly recommend procedure for people that live in high humidity and temperature environment and are active!

[@chasitygreen3772]

I just got this sensor and i dont like it. Dont know why my doctors thought this was better but my dexcom was so much easier.

[@MedtronicDiabetesUS]

We're sorry to hear that, Chasity. Is there anything we can do to help?

[@LASadvgrrl]

One thing that bothers me about this set up? Too. many steps. I really hope Medtronic starts to make sensors that are way smaller, like the Libre 3 and really doesn't need all that tape. Just seems Medtronic needs to move forward and not stay with the same ole same ole. I wear this CGM but also use the Libre 3 as it is way smaller, flatter and lasts for 14 days. Thanks for the video

[@katjawahlstrom]

Totally agree!! Application of Medtronic's sensors is crazy complicated & time consuming. Especially if you apply them on your arms - hence you can only use one hand to do it. A few years from now, everybody will laugh at this.

[@bjorn-ceben3171]

Yea im sitting here out of libre couse i was told to use this and im dreading to install it the libre is so easy and way better from what i can see and this is so time consuming and looks so hard to use on my arm that im just not not using anything

[@LASadvgrrl]

@@bjorn-ceben3171 it is hard to insert without someone assisting I find in my arm. I use the Libre as well as the Medtronic. But I’m using the Medtronic as my back up and insert it in my stomach still

[@JohnHansen-k8s]

I just got the 780 system my first thought to much to do

[@LASadvgrrl]

The oval tape that comes with the sensor gives me blisters. I guess I’m allergic to the tape. Has Medtronic changed the adhesive? Also, I can’t insert this into my arm without my wife’s help. That’s annoying. Can’t wait if Medtronic will come out with their new sensor ! Small and easy to insert is a must. My Libre 3 works just as good when it comes to my sugars

[@carolhyman5178]

This system is sooooo poor. Cannot believe it is Medtronic that came up with this.

[@MedtronicDiabetesUS]

We're sorry to hear your thoughts, Carol, and would like to see how we can help. Please give our dedicated team a call at 800.646.4633 option #1.

[@donnacartwright1327]

@@MedtronicDiabetesUS Apparently there is a brand tape we can all buy through Amazon but each time it's mentioned I don't think to write the name down. Apparently it's the best you can buy with no problems. Do you know the name?

[@jessdunn4957]

Skingrip is the best

[@brandonclark5062]

Sounds like you're just incapable of using it correctly.

[@MrGlobaldave1]

After about 8 years on the 670G pump I am now replacing that with the 780G w/ CGM. Been hesitant on the CGM since I have no issues testing my BG several times (Type 1 for 62 yrs) I must say this process is not helping me with swaying to the CGM! Cost, amount of steps & the fact that you pretty much need an assistant for the back of your arm (that area is highly recommended by Medtronic! ) Ya - I have three hands to perform that.....ridiculous. Hoping future design, like most devices these days, starts to become smaller and less involved. 🤔

[@MedtronicDiabetesUS]

Hi, Dave. Thank you for sharing your perspective and feedback with us. We will be sure to pass this along to our R&D team.

[@11wtwood]

Two things I do differently is... 1: I don't remove the needle until after I remove the backing on the sensor. That way I can use it as something to hold the sensor in place while trying to remove the backing which doesn't always come off easily and requires some fiddling to get it to release from the adhesive patch without tearing and leaving pieces behind. Then I pull out the needle in order to apply the first oval tape. 2: I wait until the pump prompts me to start the new sensor before I apply the second tape. I do this first, because you never know when it is going to refuse to connect, and I may have to remove the transmitter and put it back on the charger to reinitialize it. Also, it seems, if I start putting the second tape on right away, the pump prompts me to start the new sensor while I'm still busy with the tape and anyone who's used these pumps for a while knows how naggy and annoying it gets when you don't respond IMMEDIATELY.

[@MrWubzHD2]

wow no wonder nobody i know wants to use this system. so much waste. uses 2-3x more tape then other sensors while lasting 7 days compared to 10-14 days on other sensors.

[@gyrrep]

In 4.5 years, I have never, ever, applied the first piece of oval tape BEFORE connecting the transmitter. Is that the recommended procedure? It is not how I was originally trained.

[@MedtronicDiabetesUS]

Perry, while this is our recommendation, if your current process is working, we see no reason to adjust.

[@GodisLovetoo]

Lol, me either, but I’m going to try it now to see if it helps hold it longer or tighter.

[@jimlaing9452]

I appreciate the CLEAR AND TO THE POINT VIDEO. And nice lady, your project your voice PERFECTLY in your portion of the video. KUDOS.

[@MedtronicDiabetesUS]

Glad you enjoyed it, Jim!

[@kenklingbail8708]

They never last 7 days. 4-5 at most. I think it’s a very poorly designed system. Also, in needs to be calibrated so often you might as well not use it.

[@MedtronicDiabetesUS]

Hi, Ken. We're sorry to hear about this. Have you already had a chance to speak to our Technical Support team about this? If not, please give them a call at 1-800-646-4633, option #1. Thank you.

[@jeupshaw]

Great video. Is there a video with the whole procedure from insertion to taping?

[@MedtronicDiabetesUS]

Hi there! We encourage you to check out this playlist from our channel: bit.ly/3Xj5mZF

[@brianworley7705]

I used this method for a while. Then another sensor user gave me a couple of tips that have helped me (back in the early Guardian 3 software versions with nonsense change sensor after BG not accepted alerts) and I have changed one step as well for the second oval tape. First tip is to use alcohol swab to clean insertion area. Then remove the FULL release liner/paper on the sensor patch before insertion. I kept having the sensor move when removing the insertion needle when only the tiny adhesive adhered. Now, RARELY have sensor come loose during insertion/prep. First oval tape applied as described sans prep wipe. Second, I use some extra cut-in-half patches from the old Elite sensors or similar cut smith & nephew tape to add to the wide part of the patch with the opening towards the tab for securing the transmitter. That gives the back of the patch more support tape, especially for summers to prevent the transmitter lifting the tape during movement and perspiration. The second oval tape, I apply with the wide part just behind the tab for transmitter securing with the hole over the tab. Then insert transmitter and secure with tab. Fewer wrinkles in the tape mean less chance for moisture to get under the oval patches and tape plus less cleaning adhesive off the transmitter. Done well for several summers in the Idaho panhandle. Maybe this will give users another option to try.

[@MedtronicDiabetesUS]

Thanks for sharing!

[@susandavidson5562]

I had sensors ruined by small amount of bleeding on insertion sometimes.It might fail hours later....Now I use ice pack in bag for 5 minutes before insertion.It won't prevent all bleeding, but can help a bit.

[@jws1948ja]

HOW DO YOU OPEN THIS DAMNATION?

[@MedtronicDiabetesUS]

Hi there. The user guide can help here (www.medtronicdiabetes.com/download-library/minimed-780g-system) or you are welcome to call our Technical Support team for assistance. They can be reached at 1-800-646-4633, option #1. Thank you.

[@grahambell6096]

You say to use extra tape if necessary but you only send enough for the number of sensors ordered . Can you get extras when placing a sensor order?

[@MedtronicDiabetesUS]

Graham, additional tapes can be ordered with your sensors. Just let our Supply Management team know, or you can place the order online at www.diabetes.shop

[@christinahill2621]

Is this painful or uncomfortable feeling

[@MedtronicDiabetesUS]

Christina, many users don't report pain or discomfort while wearing our sensors. Our Medtronic Ambassadors wear our devices and would be happy to answer any questions you have. To connect, click here: bit.ly/1wdUET1

[@jimlaing9452]

No. If you are a Type 1, and have pricked your fingers 4x a day or more, this will be CAKE 🎂. Not Buttercream frosting wedding 😉 😀 cake, but still cake. Be patient. With yourself, and our Type 1 'stuff'. Jamie

[@donnacartwright1327]

My skin will itch underneath the tape. I'm allergic to the skin tac/ alcohol rub, so I don't use them.I also have dry skin. I will change sensor before showering to get a clean wipe. living with humidity can be a problem with tape curling and peeling away when skin under the tape gets sweat into the wrinkles of tape. I will usually put large band aid tape square over the original medtronic tape or I will control with Deodorant around the taped area to keep control of moisture. it's cumbersome at times. I have no problems during the Winter months only during Summer.

[@SerendipityM-j1y]

I thought you could only use it on back of atms

[@MedtronicDiabetesUS]

Hi, Serendipity, the best performance was observed when the sensor was used in the arm. For safety reasons, the system is indicated for use in the arm. However, if another site is needed, please work with your healthcare provider to assess.

[@cynthiapanchamsingh4077]

Always need of help To apply on the back of arm Stomach area look Easy To do myself But was told The arm only

[@wingchun-simplekungfu7584]

Helpful 🙏

[@donmacadam2004]

do you include 2 oval tape patches per sensor?

[@MedtronicDiabetesUS]

We do!