and i love the fact that the curb and seat are done before walls, imo thats the correct way. i see it done after walls , same for shower floor tiles and you hear some say it doesnt matter what goes in first, but imo you start from the floor up, its just a cleaner look
@jasonbengelАй бұрын
Where do you go to get q slab of marble for the shower seat? That looks great!!
@charliegoodspeed240 Жыл бұрын
Is there a specific notch to use with the leveling clips I prefer using half inch with any tile that I level with the clips one of my co-workers uses quarter inch and never gets no bond or coverage
@Trucker-Belly Жыл бұрын
Are you still using the schluter drain flange knowing they could have issues? I know a tiler that had to repair a schluter drain recently. Pebbles held water and/or was some deflection at the drain area.
@SalDiBlasi Жыл бұрын
Never had a problem with a schluter drain, that being said, I usually use FloFX Drains.
@josejujumalisolis315211 ай бұрын
For the stone cap on a knee wall do I need a slight tilt on it as well?
@Trainman04013 ай бұрын
Please…..Need Advice Is there anything wrong with leveling the curb in “all” directions and creating a pitch when installing the marble? Thanks in advance!
@BonBon770 Жыл бұрын
Great video
@SalDiBlasi Жыл бұрын
Thanks!
@johnnyaxe2004 Жыл бұрын
Hey Sal I. love your videos!! I went to a seminar yesterday from Profilitec in Batavia, NY and the guy who ran the event said he worked at Schluter for 10 years and he is a big fan of your too! Have you used any of their products? they look like they're very good. I have learned a ton from you and your videos! I install around a dozen showers a year but after installing carpet, vinyl, and pretty much any other type of flooring for the last 30 years, I think I am going to gear my energy towards shower installs full time. I make the most money and I am not crawling around a huge floor all damn day! I enjoy the traditional muddled system with the locking collar drain and liner but the guy yesterday said they are junk and steers me towards the large drain flange like Schluters. Your thoughts?? Thanks you in advance too!!
@SalDiBlasi Жыл бұрын
Haven't installed a vinyl liner with a two stage drain in many years. Pretty much every job I do is a bonded, or sealed, system with foam board, a mud bed and bonding flange.
@OGCJ1010 ай бұрын
Do you prefer a solid piece for the shower curb as oppose to having grout lines there?
@kspinceАй бұрын
@saldiblasi - You're the only guy I trust - we haven't been able to find a stone shower curb that matches our porcelain floor tile - is it a good idea to take the porcelain floor tile (12x24) and cut three pieces to fit the 6x60 curb with a schluter edging?
@SalDiBlasiАй бұрын
A lot of installers do that, if yor waterproofing is done right it won't be a problem.
@kspinceАй бұрын
@@SalDiBlasi Thanks so much for the advice. Our contractor keeps making a stink about us doing it this way and it's making me question his work. Will buy you a coffee!
@racker7855 Жыл бұрын
what color code is that blue on the walls?
@TheAxecutioner Жыл бұрын
Just so you know, Wrangler Riggs double knee carpenter jeans are the longest lasting most durable pants for construction. Another great video, thanks Sal.
@UrOnlyWarning Жыл бұрын
I'm not sure if you have a paid class that's required to get answers to small questions. Noticing that's ALOT on KZbin. I'm a New subscriber ND New to learning to diy. So PLEASE ACCEPT MY APOLOGIES IF I NEED TO ENROLL 1ST. BUT IM JST WONDERING. 1ST ur channels has taught me SOOO much and THANK YOU for sharing you Invaluable Wisdom and experience. I was JST wondering if Your wanting to make a full steam shower room. Do you need to use the same materials on ceiling as you do the shower floors. To water proof(Materials like the Corner tape? One channel said it's expensive so JST use where necessary 🤔 also said drywall works JST as well as cement board. Know that's a huge debate. But I'm searching for that answer on it's own. Again if it's a dumb question again sorry but I'm getting the nerves to even try to do the work myself and want to be Completely Sure I'm not going to ruin the work it will take.
@SalDiBlasi Жыл бұрын
No need to wonder get a hold of a TCNA handbook, read method SR614, or follow manufacturer recommendations for one of their systems rated for steam showers. Laticrete Hydro Ban Board is rated for 0.5Perms, Schluter Systems works, Not all liquid applied membranes are rated for steam showers. There is a lot of bad info, and a lot of installers on YT that are showing there methods, not industry standards.