Tips on shifting a 10,13, and 18 speed Eaton-Fuller transmission

This video is to help show you how to shift a 10, 13, and 18 speed transmission most commonly found in your heavy duty trucks like semis, dump trucks, and other commercial vehicles
Life Behind The Wheel Merch
bunkerbranding.com/pages/life...
Instagram
life_behind...
Email
[e-mail]
Amazon store page
www.amazon.com/shop/lifebehin...

[@SmokenRubber]

"I've been drivin' this truck for a year now and I still mess up sometimes". I love that, that inspires confidence for anyone thinking of going for their CDL, you could be a driver of 25 years and still miss gears, it'll happen. Thanks for doing this video man it was really informative, keep it up.

[@joncurtis5644]

Ockx I’d f CBcsssg going ugh g h

[@harleyhawk7959]

took my cdl driver's test on a 9spd. instructor said" put me to sleep on this drivers test you pass". after 4 hours of driving I looked over in the jump seat, he was out. that was in 1976.

[@bikerboy3k]

You have to drive 8 hours to get a cdl?!

[@FriedEggsandJellyfish]

@@bikerboy3k He said after 4 hours? lmao

[@bikerboy3k]

@@FriedEggsandJellyfish 4 my bad, still sounds like a lot

[@upurnose46]

@@JohnZ0805 Then he unzipped his pants and blew him while he was driving. Back then you could get away with things like that to cheat the test. Not anymore.

[@danielmcqueen1024]

That's same year I got my Class 8 license using my Dad's 74' 359 Pete, it was a 13 speed but the instructor had me shift it as a 10 speed! CDL showed up in the late 1980's I do believe.

[@MAGA-om5mn]

I’m going to stop raging so hard when a semi cuts me off in the fast lane to let another trucker merge onto the highway, even though the merging truck is supposed to yield. You guys might as well be splitting the atom inside that cab.

[@RushinTruckin]

thank you for this! Trust me, we don't WANT to but momentum is HUGE in a big rig. When we have to hit the brakes, for whatever reason, it takes the truck FOREVER to build that speed back up. It's way more of hazard for a big rig to have to stop on an on-ramp completely than it is to inconvenience a car in the left lane...who can regain their speed in a matter of seconds as opposed to minutes.

[@Drakonniz]

lmao

[@clevelandsmith404]

So True Goodluck

[@vlissblisskiss]

proper idiot you must be

[@coreyclark4190]

Actually at a merge, nobody has the right of way. Look it up

[@XBaneyX]

When you're double clutching and getting the hang of it every time you shift say this in your head; Clutch to neutral, clutch to gear. This is the exact speed you want to shift at. When you're done saying "Clutch to neutral" you should be in neutral. When you're done saying clutch to gear - it should be in gear.

[@giovannibarbagallo7723]

I didn't understand one single thing but it looks cool

[@alexisvalenzuela2091]

Samee🤣

[@florianvoges8906]

Me too 😅

[@Jim.Thunda]

Why TF is everything cooool? Your like a mob of parrots! Oh my god! That's what I'm talking about! Man! And all the rest, it's ancient history get into the 22st century.

[@hollerbredkennels3579]

🤣 it just takes getting behind the wheel and getting use to. I know a lot of place thinks they could never do it but once u get the hang of it , it's no problem

[@MrX209Elite]

I somewhat understand what he’s saying I drive a 10 speed transmission and it doesn’t have that grey splitter to split each gear. It’s not that hard to understand if u drive but I can see why some people would think it’s complicated but it’s really not

[@YZFMANIAC08]

I sincerely have respect for manual truck drivers, such a lot of different action going on along with traffic and heavy loads 👍🏻

[@MrZachgonz]

I can’t imagine driving something and shifting through gears using a Warlocks staff.

[@Mvp-AngelOfGod]

@Steve Robertson 😂u sound pathetic asf. Always people hating on custom rigs

[@mhDarkWolf]

@Steve Robertson he explains in another video that the owner of the truck did that to keep drivers from resting their hand on the stick and putting pressure on the shift forks. Also, you're not driving it, so why do you care?

[@Mvp-AngelOfGod]

@Steve Robertson why do u care so much😂 u probably drive for swift stfu

[@eribertoperez6000]

@@Mvp-AngelOfGod 🤣🤣🤣🤣

[@lipinski1337]

@@mhDarkWolf big mouth small brain, can’t worry about these idiotic loud mouths

[@TheeDrtyGhttoKid]

Dude mad respect. I’m 2 weeks into training, and people just don’t know the coordination it takes to do what you just did.

[@alexthompson5275]

In Victoria Australia I've done this and the course was 3 days but my one was 2 days to do as I was the only one doing the course

[@martinfernandez2815]

Man to this day I look back and watch your videos over and over again. You inspired me to get my CDL and for the last 8 months I worked as a company driver in an automatic. An opportunity came up to work for a small local company hauling steel in and out of the steel mills in the midwest. I took it and said yes right away. Slight problem though...I havent driven a manual truck since trucking school. I was super nervous and did not want to make a fool out of myself. So I came back and watched your videos. Even the ones that were not about shifting because I just paid attention to how you were shifting and floating through the gears. I have been out training with the owner for a month now and he has been very patient with me. I can now say I feel very comfortable going out on my own. Thanks for the great content and honestly cant wait until you can get everything sorted out and get back on the road.

[@DjNorthLight]

Thats a sexy sounding peterbilt

[@Kenny-en7wb]

Interesting. As a nontrucker, I've always wondered about all of the shifting ranges

[@stephenroberts4895]

When I got my cdl, my dad taught me the technique of "ghost double-clutching." All that's involved is that you move your leg, but only move the clutch pedal maybe half an inch. Then, just to make instructors, and the tester happy, I'd double-clutch on a downshift. Trust me, the ghost double-clutching trick saved my left leg, knee, and hip much trouble. Afterwards, I taught myself floating and had so much more fun shifting.

[@johngaudet6316]

Nothing beats getting the shifting perfectly cracking the passenger window and listening to the turbo whistle. After 25 years it's still awesome.

[@mannyzx1]

Dude, both my dad and I were like, “hell naw, we won’t drive an automatic.” Get into an automatic rig. “Hey, this is kind of nice”.

[@sethreinders9296]

Automatic is easy shifting all them gear especially in the city hell no only a egomaniac that is lying would enjoy that

[@christopherfalconer9265]

I will never go back to a manual I I have a choice no clutch knee no hand pain

[@scarharting5577]

Real men use three pedals...

[@mikem-nt7pb]

All these companies going full auto anyway you want a manual their giving you an old high mileage truck

[@williamrae9954]

Double clutch I-Shift(probably hasn't hit the USA yet?) the way to go...it's already in the next gear before you've left the current one,no gap in the revs,saves fuel!(Volvo).

[@martin1234512345]

I always split every gear when I'm heavy. I really don't like how far apart the whole gears are in lo range. Plus, it's fun to do haha

[@Cheater6913]

Great video, I especially like the part where you admit to making mistakes. I am tired of all these supertruckers that have never made a mistake and laugh at you instead of trying to help you at a truck stop.

[@CRFProductions2023]

Well because of this video and because of watching Smokey and the Bandit on repeat 10 million times, I found the inspiration I needed to get into Trucking. We're going to do what they say can't be done!

[@erikbunty2016]

Eastbound and down.

[@jensn6490]

I usually double clutch the lower gears up to 5th and float the rest. You've gotta try left foot braking while float downshifting with the engine brake on, you can blip the throttle with your right foot while still slowing down, letting the engine brake do most the work.

[@F18USAF]

5:04 giggity!

[@isaacdabeast1234]

I thought my damn phone was messing up 😂

[@caden8326]

2:30 too

[@nicknixon4279]

Great video. Less then 6 months with CDL. Drive a 10 speed. Constantly grinding gears....thanks for the info

[@johngaudet6316]

Just remember 400 rpm to shift up or down, 400 revs per gear.

[@redbluesome2829]

My big challenge back in school was pressing the clutch deep enough to where the gear engaged smoothly. Instructor wondered why I had trouble with that and figured it might be because of my long legs - i.e. less leverage on the pedal, and I believe that’s true. It seemed like I had to put a hell of a lot more effort into the clutching than others to achieve the same result.

[@shane6108]

A 15 speed splitter lever is blue. Drove a 10 speed that had an aux over/under could split top and bottom of main box. Pretty cool kit.

[@imrelentless9577]

I drive an 8 speed dump truck and I know how to float gears up and down and skip gears. I drove a 10 speed in class A cdl school. I’m going to go OTR for experience then after a year buy my own Peterbilt. I want an 18 speed. This was easy to learn and watch cause I know the concept of shifting and floating gears. Thanks a lot for this video bro keep em wheel rolling 🙏 drive safe!

[@aaronsanborn4291]

18s are easy as hell...only use the low side if you're hauling heavy or want to move slow...otherwise drive it like an 8

[@blynyt]

i'm 16 and i have my mind set on trucking so these types of videos really teach me a lot thank you so much!!

[@hollerbredkennels3579]

Good job shifting man! That was my problem because I was taught and always just floated the gears but then they said I had to double clutch for the test and it took me a minute to get use to hitting that clutch! Thanks for sharing

[@stormmize]

Being a truck driver has been my dream since I was a child, I hope to can do it by the end of this year. Thanks alot for this video, good luck and drive safe bro!

[@billcharlene1450]

Years ago worked for septic company and we had a volvo 13 speed, I didnt have a cdl but rode shotgun a ton, one day on a haul to the middle of nowhere my buddy let me drive it MAN it was cool. After hours and hours of watching guys float the gears I sort of had an idea, first run through other than first high gear I nailed em.

[@scotthabkirk6434]

I just recently started watching your videos. Very informative and I absolutely love your truck. I just got my beginners license yesterday to drive tractor trailers and my first time driving on the road will be this weekend and I was looking for tips on shifting and was glad when I seen you post this video. Thank you very much

[@shanestevens523]

Thanks for this video!!! I've watched many others on how to shift 10, 13 and 18 speed transmissions and nobody explains them so simple. I grew up on a farm driving tractors with semi transmissions in them and a twin stick 10 speed john deere backhoe but still always had trouble with the semi's. Never understood what splitting gears meant but nobody ever told me. So thanks again and I love the videos bada$$ Beterbilt.

[@Blindsidetrucker]

Thanks for the video man. I’ve been in an automatic for my first year and I hated it. I start with a new company next week running paper logs. Their fleet is mostly W9, 389, and Coronado. I’m so excited to start grinding some gears and no longer be restricted on my speed.

[@dimjim9110]

I'm a trucker and ive been at that very intersection off 94 in Wisconsin near the Mn borarder many times!! Dope content bruh

[@snoodles8006]

Wow amazing tutorial for shifting. Clearest explanation ive heard so far, my teacher didnt even explain this to me.

[@user-vx4pe5zv3r]

First time driving a manual and it was a 10 speed eaton, hard as hell. This was a excellent video man, great tips. just straight into it no bullshit.

[@MrChaosmar]

Love your videos man accidentally came across your channel and enjoying learning. Thanks for keeping this country going 😎

[@Juha-MVP]

with 35 years experience of driving Scania and Volvo trucks, I appreciate the ergonomics and utilization of technology for a reason. Better visibilty from the cockpit, better mirrors, bigger steering wheel, modern gearbox and no 2 meter long gear shifter.

[@rhuaidhrihakime1279]

I find, personally, that unless you are completely empty and the truck is brand new, split shifting allows you to get into gear much more smoothly, both up and down. Once you have gained decent ability to use the "regular gears" , i would encourage you to practice splitting gears as often as you can. You never know when the company needs a heavy load hauled and you are the only one available at the time...quick way to earn a raise! Or a quick way to die or kill someone if you didn't practice. Concurrent with this instructors information... it also opens up a lot more speed variables so any speed sign can be followed without over revving or lugging the engine! Edit* Not for the right video but still applies f*** it (spit to the ground)

[@joewiseman9695]

Dude you still had one of the BEST Trucking KZbin Channel.

[@GerOffYeWeeBastard]

Tip #1: Get a really long shifter.

[@wolfman6553]

Well Saul, it the long shifter gives you more leverage to slam that into gear. But you wouldn't know. You only study corrupt law practices.

[@shawnbrisk4523]

I float gears some much I’m proudly rusty as hell with double clutching lol

[@High_strung]

Yeah sometimes i cant to save my life lmao

[@gtroyFJB]

Shawn Brisk clutch to start off and never after that.

[@shawnbrisk4523]

Victor Hardin I taught myself how to float gears back when I was driving local around Florida and my damn leg started hurting from all of the double clutching and I said fuck this and never looked back 😂 just get the hang of the truck you driving and watch videos like this one and you will be floating in no time honestly

[@gotigahs3]

@Victor Hardin man its alot easier than double clutching to me. its just a, do it enough and you get used to it thing i guess lol.. but seriously, floating gears in a truck is alot more enjoyable to drive than using the clutch..

[@lerg12]

Victor Hardin I also went to trucking school and learned to double clutch, It was only after I graduated and was training on my first job I accidentally figured out how to float gears while I was driving an L9000 dump truck lol

[@AncientEL07]

That engine roar is something else! Only if I could do the shifting I'd be doing this.

[@dutchrookie7556]

Drove a Dodge CNT in American truck simulator, had to rev match and that's definitely something I wasn't used to as European where we use cabovers. Those are really car alike. Thank youuuu for this video, you're skilled as man! Explained very well.

[@mikebergen-5152]

WOW That Truck Sounds Soo GOOD!!!!

[@docbob5148]

Great video, I have been in trucking for over 40 years and you did it prefect. The only thing I do different is only use the clutch to start and stop. The other thing is a lot of new drivers will sit at a light with the clutch pushed right to the floor and that raises hell with the clutch brake. Unless you are changing gears you don't need to push the clutch right to the floor. Great job, nice dash to 389 right.

[@hollerbredkennels3579]

Yes sir agree 100%

[@mrdiaz2575]

Got my cdl a year ago I’m in the learning process thanks for the tips👍

[@carsandmoods3593]

I f'in miss driving an 18 Speed Peterbilt with a Fuller. Great memories. I hope I get to buy one, one day.

[@_ghost96]

As a pilot, this is some cool stuff dude. Stay safe!

[@bfry38]

Great video man! Nice to see other Truckers out there that isn’t afraid to admit they screw up, or miss a gear. I been driving on and off almost 11 years and still screw up too!

[@vonkrakenhaus7772]

Love that shiny petercar with that monster stick! Hand, you lookin' cool on your stool and draggin' your wagon. May God be in that jump seat wherever you go and in whatever direction that long, low largecar gets pointed... Fourty two.

[@THEOSTHEREVELATOR.]

this video is great for learning. i was working for a company that put me straight into heavy traffic not understanding anything about 18 speeds.

[@Sauce1977]

Best explanation on shifting I have seen yet!! Thanks

[@High_strung]

I plan on making a better one with feet view!

[@ihonorjesusnot_the_world]

Im just here for the noise buddy 😀🙌👂 #awesome

[@robertcurrer9725]

Because of you I know how to drive a semi truck people used to try to tell me how but you are the only one that seceded love the truck love the channel

[@quintinmarsters1609]

hi 5 from Australia. after driving auto for 5 yrs it's great to be back in a 18 speed. keep safe.

[@seniortac4175]

Great video, excellent explanation and demonstration as well. I just don't get having the shifter so tall, it's the same about "Ape Hangers" on motorcycles. Regardless of what anyone says you do not have as much control especially in an emergency situation! To each their own! Keep up the great work!!!!!

[@vanyakouveli3113]

Great job man! I'm very comfy with 10 speed. In Europe we don't have automatics, we all learn 5 or 6 gear car driving, so 10 is a split away only! But 13 or 18... that's not for me!

[@briantaylor8197]

Great job explaining and actually showing how it's done. I'm jealous of your truck. Nice!! 👍

[@jackdavis7664]

Going after my CDL now and this was a great video Thanks buddy for the information

[@AK47HEAVYMETAL83]

Hey bro, I never grind it slowly in to the hole at a slow speed when downshifting to a full stop or close to a stop. it only takes a little tap to rev it in so you never hear but one click. But great vid brother 😎 I haven’t double clutched since I left driving school almost 10 years ago. I don’t even remember how that shit works anymore. 😂😂😂

[@Jdb2013]

Whole reason I went to truck driving school was to learn how to drive a semi( manual not an automatic). I get there and they don’t have one single manual transmission I was pissed because they told us that’s what they train in. Well apparently manual transmissions are being phased out which I think is stupid as did the instructors. They got me bro lol great video and earned a subscriber! Keep the vids coming driver!

[@LunaticOstrich]

I was looking forward to that top. But my driving school had a brand new Volvo and you could drive it as an automatic or a manual. But you just shift by pressing the up or down button. How dissapointing...

[@aaronsanborn4291]

Manuals will never go away...if you test on an automatic you're restricted to an automatic...I wouldn't hire anyone who can't drive stick

[@Jdb2013]

Aaron Sanborn Yeah I know that’s what I was I saying. I wanted to learn in a manual they didn’t have any manuals at the truck driving school I went to and yep I know the restriction thing isn’t that big of a deal you could learn in a manual and just go back and test out but times are changing and the way they are training isn’t what it used to be so you’re lucky if you can get in a manual unless you use someone’s truck and learn like that but if you go to a truck driving school like I did which honestly had it’s pros and cons you’re going to be in an automatic. Not my choice I was told before I started school they train in manuals when I got there they had stopped and said they are phasing out I couldn’t control that if I wanted to.

[@aaronsanborn4291]

I went to a school...automatics are junk. I don't do OTR, I work construction and in the woods. Automatics are fuel inefficient and the loss of power is crazy. They also don't shift correctly, any time they sniff a hill they down shift.

[@Massuu12]

You really helped me out with the clutch N clutch gear

[@b9bot148]

Always great videos stay safe on the road.

[@migueljr9475]

Awesome dude “clutch neutral clutch gear” ive been looking for videos that explain what double clutching is and this one is the most helpful one this will help me get my cdl

[@aaronsanborn4291]

Clutch is only for starting and stopping...you'll figure out how to float gears

[@williamrae9954]

@@aaronsanborn4291 1650prm i learned...blip it

[@aaronsanborn4291]

@@williamrae9954 I don't even bother to look at the tac...I listen to my truck...

[@williamrae9954]

@@aaronsanborn4291 Aye,that comes with time...a may drive up to 20 different trucks a year,American,Euro and Japanese...all sounds are different,as are g/boxes

[@aaronsanborn4291]

@@williamrae9954 all three of my trucks are Caterpillar powered two by 3406s and one by a C15...they have two different transmissions as well. But if you listen the Cat motors will tell you when to shift no matter what the gear ratios are.

[@darik132]

"don't hesitate and know where your gears are" amen brother!

[@ThePaisakiller69]

I’m in my second week of cdl school, can’t wait to finish pass the skill test and get going, probably will get me an old Peterbuilt like that one u have, pre emissions love that sound

[@Kwobler]

Didn't hear a word you said. Lol was lost in the sound of the pipes. Lol love that deep sound.

[@residentevil9894]

I don't even think planes have that many gauges

[@moctezumaRevenge]

lol

[@shanetroyer5359]

They have more

[@gordo1163]

the newer ones done because its 2020

[@moctezumaRevenge]

@Steve Robertson all about style and making money that’s why certain guys run old trucks plus I like to run illegal still

[@moctezumaRevenge]

@Steve Robertson what you driving?

[@michaelschmitter8725]

Nice video bro. They didn’t make me double clutch when I did my test. I just floated it all 🤷🏼‍♂️

[@vedran17]

You can do whatever you want on the test, but if you fack up it's overr

[@marcelcovaci9922]

That extended shifter just puts wear and tear on your detent pin

[@elvynortiz3456]

I have to say this truck sounds amazingly nice

[@jpprind]

You were in Osseo Wisconsin. You probably go through Eau Claire then. Cool!

[@alexjaeger458]

Hey that looks like Osseo! Love the truck!

[@mikeadams92]

Osseo Wisconsin, yes it is!

[@mrfuzzywuzzykinz2219]

20 mins away i was like that looked like ive been there b4

[@aidancollins2545]

Prob the best and most explainable video I’ve seen

[@SHADZ6523]

Awesome video🤗 love the sound of that beast👏

[@Iwanncamp]

I had an instructor, 9 years ago, that was known as “Tap-Tap”.

[@joshuahoff6666]

I've always wanted to learn how to drive an 18 speed. Seems simple enough since I only ever drive manual vehicles.

[@erikbunty2016]

And manuals are starting to get fewer and farther between.

[@johnwahan9086]

Was Trained On A 4 Speed Truck Towing Trailers A GMC Dually Work Truck. 1st Was Granny. Basically Get Out Of Mud Gear. Lol. Then Had A 10 Speed. Driving And Learning Was Actually Fun. Learned How To Back Trailers Quickly Running Underground Phone Lines In Rural Areas. Unloaded The Machine Off Trailer A Few Times To Get Me Out Of Ditches When I Had To Turn Around After Going Down Single Lane Back Roads. With Dead End. This Was In The Mid 90s. I Got Scared A few Times I Will Admit. After Dark In Middle Of Nowhere Using Flashlight And Headlights Getting Out Of Ditches. Wouldn't Trade That Experience For Anything. Thanks For Sharing Your Video. 😎.

[@ericmartinez6692]

Doing my skills driving at the moment....this helps. I'm working on how DMV will test me...its new to me and I'm making mistakes, but I'll get it down. Thanks this vid helps.👍🚚🚛

[@thorcole2089]

I remember in truck school I was driving my S-10 with a 5 speed. Most awkward thing in the world was going from that to a rig then back to that every day lol slamming that clutch and double shifting a synchro 5 speed like a mofo lol

[@jahx8148]

And I’m over here struggling to Drive a manual Honda Civic. Great video

[@maoduida387]

ouch...

[@BruceCarbonLakeriver]

I'm floating gears even in my Golf MK3 - manual tranny ftw :D

[@jitendrashekhawat7632]

Hey mate, you just explained everything so simply,, really learned something from this.

[@mrwhodatallday504]

Good demonstration fam!! ✊🏾💯✊🏾

[@HF-cc7ez]

You had me and my wife at, “Fifth hold.”

[@A-Z__124]

I was able to float gears in my test in Minnesota. Double clutching perfectly every time is difficult, especially with a lighter load or empty. Maybe that's just me.

[@MikeLiteraus]

I am a manual car driver and double clutching is so hard to do perfectly.

[@kevincallahan2444]

The Quagmires are priceless. Lol. Great video.

[@Gamerlane]

Very good explanation bud love all your vids

[@TheF150drvr]

Salesman: welcome to Volvo, what kind of semis your looking for? Me: AUTOMATIC PLEASE! 😂

[@High_strung]

🤢🤢

[@theinvertedpineapple942]

Duckdude001 my dad got a 2019 379 13 speed early last year. Looks awesome with 8 in pipes and the jake break sounds amazing

[@googleuser6916]

One bad choice of semi, another bad choice of transmission

[@googleuser6916]

Volvos are just junks in America because everything has to be shipped off to be repaired and almost everything is metric

[@theinvertedpineapple942]

Duckdude001 your right on that it is a 389 and it’s a Cat 550 engine. As I’m writing this I’m with my dad right now on the truck

[@juzras1808]

This is the reason why i subscribe to his channel😃 i love huge trucks💪🏽 but the only thing i can get in singapore legally is a pickup truck with no fat wheels coz its illegal😭

[@Tat2Matty4Free]

Good tips man, I miss driving 13 speeds. My company right now only has 10 speeds and its just not the same feel.

[@corymc92]

I just got the best trucking job ever in Denver, CO. 60 cpm, driving a 2020 volvo 860, automatic. They keep me running nonstop, never bother me at all, they don't care about mpg, I can keep it running 24/7, plenty of hometime, and always light loads, get paid 25$ every stop, trucks limited at 71 mph. I'm loving it.

[@jamesmelee7976]

Bro if I’m in an accident in that truck, the crash doesn’t kill me but the Shifter will...

[@DVSUte]

Jedi teaching the little poeple :) Love ya engine brake noise

[@scottmichaels2538]

We had an old international loadstar with a V-92 silver Detroit & a 5×4 transmission that's what I learned on when I was just starting out at 14 on our farm. Its pretty simple once ya get the hang of it but... I sure did half come to a complete stop & start all over again cuzz i would get lost like several times there at first lol. That ol truck would only do 60 top speed but boy that ol V8 Detroit sure made it sound like you was really rollin out lol.

[@dieselwrench3621]

Very good video easy to follow tutorial on shifting.

[@08Street14]

Love your videos man, I definitely subscribed and hit the bell. Do you have a instagram?

[@WISHYWASHY941]

Tacosupreme313

[@aarronortiz4178]

that is one sexy truck ! diddnt even mean to watch this but damn get it driver! wish i could work at your place of work!! i need a good looking money maker like that!

[@stevenbrooking8515]

Excellent tutorial Bro. Need a man like you in the bush, lol. Easy to follow👍

[@mpaulo6222]

I’m soooooo lost lol but I’m excited to learn, I start my CDL class on Monday. Thanks for the video.

[@rashadreddsent.8453]

Giggity!!🤣🤣

[@High_strung]

I’ve been waiting so long for this comment Lmao

[@potentialasset9169]

5:03 giggety giggety giggety goo?

[@High_strung]

Lmao

[@Aphakiastudies]

Slipped in

[@kennethsnyder9236]

Making it really easy to understand, awesome 😎

[@StratocastRS]

Man you made this seem easy! nice work