Tips & Tricks On How To Change MK Michael Kors Watch Battery!

[@kevshouse2]

No thumbs up cos u did not show how to replace the back cover properly.

[@faridafarouq786]

How to put backcover back onl? That's why I watched the video 😢

[@LcisFresh]

Cos isn’t a word so thumbs down to this comment

[@jehbaluyut]

How to turn back the back over?

[@LiterallyCant87]

@@faridafarouq786exactly!!! Ugh

[@dafa_kingfish9854]

So I search for videos, because i have trouble closing the lid back on. Then he skips it lol😂

[@doghouse1960]

thinking the same lol

[@h.t.8565]

Same ...

[@bxpress6507]

That "clamp" had no opening to save the crystal from possibility being cracked..proper watch presses have a different die to have no pressure on the crystal

[@dirtyg050]

😂😂😂the one thing I was watching the video for was to put the back back on you wasn't able to do it.

[@MsScorpiondc]

So did I miss how or when he used the tool to actually pop the back cover back on? I don't have that tool and I have tried my best to pop it back on but it won't budge. I feared I may have bent it when I took it off but seeing his video the way his wobbled a little I don't think I did. Anybody successful without the tool?

[@raippballs]

Nope. I'm trying to pop it back on and it won't budge

[@DLCA13]

Did you find a way to pop back the cover without tool?

[@StanScott]

Can you show us how to put the cover back on successfully?

[@macdaddypimpping]

I used a wood clamp tool but you can also buy a watch tool. Back cover has to sit in the right position and evenly or else it will never snap back together with enough force from the clamp.

[@RajatPatil1711]

Lolz I came here to check the same.. it’s not going on!

[@kenoharley1]

Almost put me to sleep. Video could have been done in less thsan half the time. No pad under the face of watch? Probably would cause it to be scratched.

[@KarlaPaulsen-q4c]

I have come to watch video for same purpose as all of you. Has anyone been able to close back cap on after changing battery or found a video that actually shows how to? Thanks.

[@arnoldinhobaniaka4440]

🤣🤣🤣🤣🤣🤣🤣 👎🏼

[@Helloandgoodbye12]

Great video, i change the battery by myself, but i can't put the lid back on ☹.

[@macdaddypimpping]

You will need to have lots of patience, need the back plate to be even and not tilt in any angle and pressed down firmly without moving the back plate.

[@flodaddy21]

Yeah, like he showed in the video. 😂

[@roserobinson1852]

I can't get the back on and I see you couldn't either any tips and why is this one so hard to get back on

[@macdaddypimpping]

You will need to make sure the back plate will sit evenly not lopsided and press down firmly.

[@macdaddypimpping]

I used a rubber hand clamp and it works.

[@shabujenny]

Nice video however You didn’t show the pressing tool to close the cover after replacing the battery which is the most important tool.

[@31398genesis]

Dude I need guidance I need a clamps in order to put back case 😮 wow hard change a battery

[@macdaddypimpping]

Make sure the battery cover sit evenly and not overlapping so it can closed properly.

[@jessedominguez5591]

I watched this video to see how to put the snap back on and never showed it...

[@deidara503sv2]

My aunt gave me a Pepsi watch back says MK Michael Kors. Would it be worth restoring it? It already looks old but not that old

[@Elvis-dw7ux]

Yuk....wish I had seen this earlier as I just shattered my glass on one - the other one presses fine with my my thumbs - the third one will try your way and hope it works....but u did n't say the most important thing - there is a small "v" on the case which has to align with the wheel for changing the Time and Date? Cheers from Canada... No luck - tried the Baby Oil trick too - maybe the Roots watch back is twisted? Haven n't used the broken and Roots for 30 years now...

[@Nfalak]

Hahah he has the same problem as we have, he couldn't close the back

[@macdaddypimpping]

Haha, yes, I did managed to put the cover back on. You have to put back the cover evenly with the watch casing or else it will never clip back on.

[@saraheidemann7961]

how put the lid back????

[@macdaddypimpping]

Very easy, just make sure the back lid is evenly seated and press down firmly. Make sure you are not pressing against the raise circle or else it will never closed.

[@ThePjakes]

It's a miyota movement and you have to push the arm nearest the coil and bend it slightly towards the coil until the battery pops out. I made your same mistake and had to take out and out put back the screw and refit the arm because the replacement battery wouldn't hold in.

[@amymendoza4035]

After a few videos, you're the only one that could help me. Thank you so very much ❤️

[@macdaddypimpping]

You're very welcome!

[@SixSenseQuan]

Mine doesn't have a nodge apparently....it's an mk tribeca

[@dorinrusu1312]

Those nails bro…

[@macdaddypimpping]

The best

[@corruptduboiscountyindiana5058]

youre prying and unscrewing things that dont need to be messed with. Here is a video that can help -----How to change the battery in a Gotham pocket watch

[@denetgeeth]

Cannot put the lid back on

[@macdaddypimpping]

You need a special tool, www.ebay.com/sch/i.html?_from=R40&_trksid=p5413.m570.l1311&_nkw=watch+back+case+press+closer+tool&_sacat=0

[@Pgh2Dall]

New battery and it the second hand still didn't move. Any ideas?

[@macdaddypimpping]

Make sure you have a good battery and contacts, if not then it's your watch mechanism, check for any liquid or water damaged.

[@stephentoroni738]

Where did you get your orange tool to pry the back cover off the watch?

[@macdaddypimpping]

I bought all the tools from eBay, good luck.

[@RaimundaSouza-vl6iu]

Obrigada, pela precisa informação.

[@veronicabrandariz2248]

Thx you are a very good teacher 👏👏👏👏👏👏🌻

[@macdaddypimpping]

Thank you! 😃

[@skykru565]

Je fais ça en 30 secondes maximum sur un moteur miyota.