a few simple tips on how to make taping with the Delko Zunder while using FibaFuse easier. If you're interested in purchasing a Zunder check out the link below. www.all-wall.com/Delko-Zunder-...
Пікірлер: 142
@ramon83212 жыл бұрын
Simply and very explanatory video. I never watched a video review so short and so informative. Thank you.
@drywallnation2 жыл бұрын
Thanks for watching!
@childofgod51152 жыл бұрын
Best review ever! Short and very informative thank you..
@cristianvega60672 жыл бұрын
A banjo with wheels. Wow what a big difference that makes. I’ve never seen one been run at that pace. Really cool just a couple of wheels can be a game changer. Kinda sucks no blade to cut the tape tho but again still prolly much faster because of the wheels.
@mariad41832 жыл бұрын
Fantastic instruction! Thank you so much :)
@ProbeGT26 жыл бұрын
Nice video. another tip would be to use a seringe to fill the banjo, keep it factory or remove the cone for easier fillings.
@Ocanadakiter3 жыл бұрын
Takes me seconds to fill it with my tube.
@pablocamus15385 жыл бұрын
Que genial, pero con la menera que instalan los tabiques en Chile es difícil encontrar planchas de volcanita a si de parejas...
@BZ13406 жыл бұрын
I have the oriinal delko banjo. This looks like a good improvement. Also do you have a video on second coat mud for inside corners. I struggle it seems getting a good coat. I started doing opposites, So as not to get the corner rough from the knife grabbing the fresh mud. Maybe I need a Flusher for the inside corners. That way I can apply mud to both sides. Great simple vids.
@towndrunkjr.54202 жыл бұрын
A roller and a couple flusher heads would be the greatest investment you've ever made. Look up the can-am nycor flusher set, very affordable but leaves a superior finish compared to anything that could be done by hand
@arrowood4176 жыл бұрын
This is so awesome. Never knew it existed. Thanks for sharing. ☺☺☺
@deankillen63452 жыл бұрын
FART
@Gypobt5 жыл бұрын
how many flat tape can i do with one fill about 6” size thanks
@ivtec8455 жыл бұрын
I get alot of run out makes a mess and my mud is about the same consistency as yours maybe I'm overfilling??
@Jake_Hynds6 жыл бұрын
I think what this tool is missing is a hole on the very bottom so you could use a pump to pump mud into the bottom and should push the tape back to the top while filling instead of opening it all the time
@DoTCom-rn3vg5 жыл бұрын
Very nice I need this in germany
@zvezdnyi20006 жыл бұрын
cool tool
@olivergarcia72833 жыл бұрын
Excelent Thank you man...
@framing2finish6 жыл бұрын
Whaaa? Cordless mixer? I want, I want! How do you like? Do you find the fibafuse wears out the Zunder? Mine has little grooves in it from only a couple rolls of fibafuse. Love that stuff for patches though, fantastic stuff!
@drywallnation6 жыл бұрын
The Milwaukee Cordless Mixer is our favourite power from last year hands down. absolutely love it
@timlink3415 жыл бұрын
@@drywallnation How many boxes will it mix at a time on a charge just wanted to make sure that it would be worth the money thanks again.
@user-bj7kt9vm2c2 жыл бұрын
The paper also wears this tool, but by the time the tool is destroyed at least a few hundred rolls will suffice. Definitely worth the money.
@mirrorhi95275 жыл бұрын
Hi Sir, I am using banjo or this machine but I am wondering why when we use this machine we don't use glue just fanatura. But If I plaster with hand first code is going to be glue and second code is fanatura?
@rolmarz96042 жыл бұрын
Beautiful brother, how do I get one?
@franciscoplacido22275 жыл бұрын
Congratulations.👍
@dennisloosli11642 жыл бұрын
Do you use the same mud for taping and texture?
@puttyman.paintpark2 жыл бұрын
Perfect!
@igsegrom62815 жыл бұрын
Nice !!!
@wahabdar3415 жыл бұрын
Sir from where i can buy this item and what is the price thanks
@user-bj7kt9vm2c2 жыл бұрын
Hi man where are you buying the fiberglass roll from? Can you put a link to buy online
@benmcconkey22265 жыл бұрын
fibrefuse? never seen that before. Must work wonders to have professionals like you guys using it. Just never seen it in our area
@jackbenner113 жыл бұрын
Just got my first roll of it! bonds with mud much better than paper only thing is it can be kinda of annoying to rip but much easier to work with than paper
@1988josip2 жыл бұрын
In europe here we are using fiber above tape, thing is fiber is really soft and you need to be carefull, especially if you go with corners, i would do tuff taoe corners and rest with fiber because it s actually really easy to work with
@SonarPrison Жыл бұрын
@@1988josip agreed my man
@louisgholland7093 жыл бұрын
Do do walls flats then inside corner's then ceiling
@symbioticvenom64565 жыл бұрын
There ya go
@007raybould3 жыл бұрын
Great for the internals but on flat joints we only use Skrim fibre tape for the flat joints in the UK
@stephenc4161 Жыл бұрын
good for you..
@SonarPrison Жыл бұрын
@@stephenc4161 that’s his opinion on where he’s from. Why you hating old head? 😂😂 don’t know about different climates, different mud, compounds (WHATS IN THE MUD)? Learn new things, always. Don’t be so stuck in your own ways. Smfh.
@stephenc4161 Жыл бұрын
@@SonarPrison pull yer head in lol!! Ya wally!
@diy-anything13475 жыл бұрын
How to purchase this Kit?
@g.vconstrucoesereformas67675 жыл бұрын
Muito bom
@aelfswith3 жыл бұрын
I know this is a 3 yr old video, but if the tape is hard to dispense, does that mean the mud needs to be thinned more?
@user-bj7kt9vm2c2 жыл бұрын
I know this is an old question .... but yes you need a quality roll that is not easily torn. I tried with the local stuff and it just does not work. I will continue to work with this tool only with paper until I find a quality roll. And I only put the fiberglass cylinder manually.
@krisbrand3542 жыл бұрын
Yes. Thin it.
@marksteele453 жыл бұрын
Thanks!
@pangloy12343 жыл бұрын
Hello, sir. Can I share this video on my shop website?
@timlink3415 жыл бұрын
I prefer a bazooka ,, yet the banko is way better than nothing I guess ,I'm old school I've taped for 15 years w just a pan and knife note I was younger then , the bazooka is a life saver Indeed , to think I used to tape bed coat entire house with pan and knife and so many other people also hats off to yuall good information thanks for video
@Interior_Works5 жыл бұрын
Bazooka is definitely the faster and the better way. Especially for large jobs. Banjo is ok for small jobs in my experience.
@elpzolero236 жыл бұрын
I want one
@Ocanadakiter5 жыл бұрын
Thxs for the video. Do you think this would be faster than a super taper?
@Interior_Works5 жыл бұрын
I have this banjo, a bazooka, and a super taper. The the banjo is slow but clean. The super taper is the fastest, fast but messy on hands and clothing, But when no ones looking, fast is all that matters.
@Ocanadakiter4 жыл бұрын
@@Interior_Works thxs yea thats all we been using. I agree its supper messy.
@mynoralvarado63543 жыл бұрын
Excuse me. question where I can find that tools.
@joeyftw2803 Жыл бұрын
Excelent
@elmarperez38555 жыл бұрын
Está bien buena
@michailsorochan93195 жыл бұрын
Good idea ! But there are questions about the mixture and tape . Are there representatives in Russia ?
@DelkoTools5 жыл бұрын
Not yet. Email info@delkotools.com.au
@TheRL695 жыл бұрын
🤩⭐️⭐️⭐️⭐️⭐️
@stargateproductions5 жыл бұрын
I am wondering why the butted seams aren't staggered on the walls?
@24revealer5 жыл бұрын
easier to tape would be my guess.
@stargateproductions5 жыл бұрын
@@24revealer its not easier to finish though, takes more time and mud. Always stagger your butted seams.
@brocksinclair665 жыл бұрын
Staggering also adds strength to the joins
@9and75 жыл бұрын
same...
@squigglyphrank93485 жыл бұрын
Cause the boardmen are hacks. Jk over hear they have to.
@santosrenovations70625 жыл бұрын
how can i get one ?
@entreprisetopsol75252 жыл бұрын
Very good and neat work And you look like Mark the owner of Facebook
@24revealer5 жыл бұрын
If you are in Northern Ontario, how about a link in Canada to buy the Delko Zunder?
@DelkoTools5 жыл бұрын
Canada csrbuilding.ca/product/delko-zunder/
@shezadihosny21413 жыл бұрын
@@DelkoTools in USA? Where I can buy this tool?
@mehmetbozgoz245915 күн бұрын
Ngl it is so usefule
@marcovargas3396 Жыл бұрын
Where can I buy that banjo????
@timejumper80032 жыл бұрын
How many jobs will this banjo last for I have heard only a few the plastic tabs break off easy.
@geovanycorrea14903 жыл бұрын
Can I use a mesh tape instead of paper tipe with that tool ?
@nickjene65713 жыл бұрын
No mesh tape requires you use hot mud or quick dry mud on the first coat
@josueortiz16143 жыл бұрын
Never understood why the zunder eliminated the cutter
@MsAnghelito5 жыл бұрын
Hey man what is the name of that tool please. Great video.
@DelkoTools5 жыл бұрын
ZUNDER by Delko Tools www.delkotools.com.au/
@luisalejandrogranadosgutie60892 жыл бұрын
Alguien que me diga cómo se llama la herramienta
@rodolfocatalan62305 жыл бұрын
Donde puedo comprar esa maquina...?? Y como se llama....!!😁
@omarrojas6655 жыл бұрын
Rodolfo Catalan eBay creo que se llama taping tool allí la puedes comprar.
@DelkoTools5 жыл бұрын
ZUNDER by Delko Tools www.all-wall.com/Categories/Banjos/Delko-Zunder-Banjo-Taper.html
@DelkoTools5 жыл бұрын
@@omarrojas665 ZUNDER by Delko Tools www.all-wall.com/Categories/Banjos/Delko-Zunder-Banjo-Taper.html
@josealbertozepedadeleon92295 жыл бұрын
La puedes comprar en ames tols se llama venyo
@user-ju5or7vf8f2 жыл бұрын
Круто. Молодец
@Ocanadakiter3 жыл бұрын
How to I get the crease on the right side when using paper tape.?
@drywallnation3 жыл бұрын
Flip your roll of tape the other way on the back of the tool.
@Ocanadakiter3 жыл бұрын
@@drywallnation thxs I'll try that tomorrow. It's was messing with my mind ..not sure why🤣
@hggbbgnkk28315 жыл бұрын
A mi me duro 1 mes Ahora tengo q comprar la piesa donde van las rueditas
@solanoluigi254 жыл бұрын
Aprende a trabajar y no a dañar la herramienta 😂😂
@jiminutez3 жыл бұрын
Why doesn't your link work? Says page not found. Did KZbin ban you?
@jont68613 жыл бұрын
I've used mine a couple times and while it does save me some times, I'm actually struggling with the tool, I can't use rolls of paper that are 250' feet long because pulling it is simply too hard so I have to use 75' rolls which isn't nice. It seems to be easier with the FIBA tape but I still struggle pulling the tape. I do mix my mud fairly soupy, so I don't think that's that's problem. Maybe someone can give me a trick. Like I'm literally fighting with the tool and the paper sometimes.
@drywallnation3 жыл бұрын
Mud is still too thick. I can almost guarantee that's the issue.
@joshauamcdevitt79982 жыл бұрын
hold the tape with your finger
@wadeh7772 жыл бұрын
How can u fit a 75 ft roll in there without it falling out? This this is not at all designed for paper tape
@eiradavila2 жыл бұрын
No prefilling the joints?
@1988josip2 жыл бұрын
Prefilling is must, otherwise it will shrunk in itself, i use Uniflott from Knauf ,top material, and dry fast if you have 60m2 roof when you finish it you can go and do 2nd coat
@BZ13402 жыл бұрын
I still struggle with the tape disappearing back into the banjo when I cut it with the 6 inch.. Especially in the corners
@drywallnation2 жыл бұрын
Try mixing your mud a little thinner and don't cut the tape so close to the mouth so that even if it does pull back a bit you're not loosing it into the banjo
@BZ13402 жыл бұрын
@@drywallnation It’s the overhead cut offs I find the tape is hard to rip off. I have to say for 75 bucks it does worth pretty good. I’m in the Reno biz. So bathroom and Kitchens its got its place. I luv to have a 10 inch box. But having a pump is just to much of an investment and cleanup after use. I’m not going from job to job taping.
@aaronmeyer62448 ай бұрын
@@BZ1340well if you already know cause you bought the pump what's the issue now
@spinbubba3 жыл бұрын
more water in an air drying compound means more shrinkage
@elmarperez38555 жыл бұрын
Donde venden esa erramienta y como se llama
@angelerikvizcarra42175 жыл бұрын
Venden una en home Depot,o la puedes ordenar por internet,
@omarrojas6655 жыл бұрын
Elmar Perez busca como taping tool
@kotliakotlia10195 жыл бұрын
With machine it don't fill the gap between board it's not proper way fist apply component between gaps and then apply tape
@bobcougar774 жыл бұрын
Why should I use Fibafuse over paper tape?
@1988josip2 жыл бұрын
In europe it s mostly used, for corners i would go with tuff tape because even with tape you need to be carefull not to damage it
@bobcougar772 жыл бұрын
@@1988josip 2year later I've kind found my equilibrium with fibafuse. It's my go to for patches since it's so thin. Most of the time I use it for buts and flats. Still use paper tape for angles. I do still have some reservations on just how strong it's vs paper, but haven't had any problems yet
@1988josip2 жыл бұрын
@@bobcougar77 problem with tape are bubbles, you need to be very carefull to push all bubbles out with fiber it s easy
@bobcougar772 жыл бұрын
@@1988josip agreed. But I grew up with tape, I rarely have troubles.... Although I do screw up every now and then!
@marksteele453 жыл бұрын
Link = "Page not found. "
@gonzalorojas54725 жыл бұрын
Donde lo consigo
@omarrojas6655 жыл бұрын
Gonzalo Rojas eBay. O Home Depot Taping tool. Es el nombre aunque te saldran de diferente manera allí la encontraras
@DelkoTools5 жыл бұрын
ZUNDER by Delko Tools here www.all-wall.com/Categories/Banjos/Delko-Zunder-Banjo-Taper.html
@DelkoTools5 жыл бұрын
@@omarrojas665 ZUNDER by Delko Tools here www.all-wall.com/Categories/Banjos/Delko-Zunder-Banjo-Taper.html
@marianoitalia_ml5 жыл бұрын
Dlaczego płyty nie na mijanke?
@onehans665 жыл бұрын
bo to jest murica ;)
@user-tc5pn2qy4x5 жыл бұрын
О разбежке не слышали такой длины не разшитые швы потрещат быстро
@sfmgolf6 жыл бұрын
Still having trouble getting used to carrying a knife with me.:)
@alexvdubb5 жыл бұрын
No cutter. The tape gets stuck no matter how runny it is. Hot garbage. You gotta carry around knife then the handle of the knife gets messy. If you mess up the cut the tape gets cut inside the banjo then you gotta open it and leaves a huge mess. Way too much work for what it's work.
@therandomgamer8668 Жыл бұрын
Its still a good investment considering a bazooka is like 10x the prize
@SpYucaipaSoCal4 жыл бұрын
Do yourself a favor don’t use fibafuse for angles. It does ok for flats but you make sure there are no gaps in the hanging or you will get air pockets where paper sucks into smaller gaps when compound dries. The fibafuse is more ridgid. And wear a dust mask if you’re using the Fibafuse you can see the fiberglass floating around in the air. Also 500 foot roll won’t fit on your banjo it’s about 12 inch diameter.
@franta77385 жыл бұрын
Šašku
@rpmtheh70666 жыл бұрын
Inside of the corners.?????!!!!!....not fibafuse...very bad....just the paper
@drywallnation6 жыл бұрын
It works great in corners, just takes some practice
@rpmtheh70666 жыл бұрын
May be , but i prefer paper tape, i like to do a safe job...100%
@1988josip2 жыл бұрын
@@rpmtheh7066 fibafuse is fine also but you need to be more carefull since it s more sensitive to damage
@randyu86886 жыл бұрын
No cutter? No thanks
@duartepaintinghandymanservices5 жыл бұрын
Drywall Experts primadonna
@sidley12345 жыл бұрын
No pre-Filling? 😡
@skliros92354 жыл бұрын
You talking about prefilling the seams? Some drywallers durabond fill the seams before tape. Then others who are lazy, just start out with tape.
@wadeh7772 жыл бұрын
I purchased this tool and I was very displeased. Mabey with the FIBA fuse it's better but we don't use that product in the st Louis region it's not at all reliable and honestly don't know why anyone likes it but I guess with heavy texture you can get away with it. Anyone who tapes every day at a very high level of production will instantly regret this tool. Can't do small tabs or really short runs
@Num6192 жыл бұрын
ช่างไทยเก่งกว่าเยอะ
@krisb34295 жыл бұрын
Garbage. Buy a bazooka.
@TitillatedGoat Жыл бұрын
im faster and cleaner on a banjo than a bozoka
@troyknighten94563 жыл бұрын
Fibafuse is NOT suppose to go in corners or angles lol thats some armature shit
@PATTACAT723 жыл бұрын
Bullshit...Only an amateur would think that. I’ve been using it for corners for years now. Blows away paper tape because no risk of bubbles.