How To Cut And Glue ABS Pipe!

[@TipsNNTricks]

Don't Forget To Pick Up Your New Manscaped Products Here: Get 20% Off + FREE Shipping @Manscaped: www.manscaped.com/tips

[@kapdolkim1914]

ABS fittings are tapered - so you need to hold them for 30 seconds or so otherwise they taper will push it off slightly.

[@manityjones7306]

1000%

[@RH17]

San-Tee is not allowed in horizontal position and also, i wouldn't worry about dusty interior of your DWV...

[@justesaint-louis864]

Hi, very useful information thank you. Have a question though. I need to cut an abs pipe (an old about 2 inches connector part that was glued years ago) that is already in the floor and there is very little space. Can you tell me how would you cut that, please? I cannot use a circular saw, neither a saber saw. I have an oscillating multi tool can it do a clean cutting job? Also, this pipe is 1 1/2 in because there was a bath that I removed... But what if I keep this pipe for the shower that I'm planning to put there instead of the bath? What problem migh occur? Thank you very much for your answers.

[@Jay.aviles95]

Do you need the primer? I’m new to this or can you do it with the cement only

[@bigglilwayne7050]

ABS is a one step solvent weld process, look it up..... Idk why they sell those combo packs with the yellow can of acetone cleaner, read the label of the black cement and you'll learn that primer and cleaner are both forbidden

[@FilmsByJRP]

Dang Chris your about to hit 150K subs! And you only hit 100K two years ago! Sun count’s starting to speed up!

[@jerryjeromehawkins1712]

All I see are 90° and 45° fittings... 60°??? 🤔

[@vroor32]

Feeding the algorithm bruh

[@718chico]

😂😂😂😂😂

[@liquidplumber-ms4xi]

San tee is allowed on the horizontal if it's a vent... I didn't like that he butchered the studs. Buy a hole saw. Also I'm pretty sure it was a 90° but he said 60, twice...

[@IRoYaILTY]

He called both a 90 and a 45 a “60”

[@bigglilwayne7050]

Well the dude is clearly a handyman at best.... Look where he used that short radius vent 90° lol..... I wouldn't let the guy plumb an outhouse, much less in a house!!

[@vroor32]

​@@bigglilwayne7050😂 y'all are falling for his "intentional" mistakes.... He gets more comments (including this one) and it feeds the algorithm... Plumbers just love to correct everything 😂😂

[@bigglilwayne7050]

@@vroor32 Correcting everything paints a more arrogant personality, whereas I point out code infractions and no double-talk can disregard the logic in doing so.... . And the whole, "purposely doing dumb shit" argument is weak af.... Chances are you're the simpleton in the video

[@demarco767]

I didn't use cleaner 😳

[@SaulSerrano-mu1jw]

Your not doing the plumbing right Santee can't be plumbed om its back

[@NMETSGChan]

This one is the perfect example of when you don't know how to do something you shouldn't try to teach other how to do it. YOU SHOULD NOT USE Sanitary Tee horizontally.

[@robinjeffery4389]

There is NO 60 degree elbow!

[@charliebrady3751]

Indeed. It's a 90 degree elbow, turning from horizontal to vertical. The guy is either an idiot, or making deliberate mistakes.

[@bigglilwayne7050]

Those are 1/8 bends, not 1/6 bends.... Translation: You're incorrectly calling 45° elbows, 60° elbows....

[@bigglilwayne7050]

That's the oldest cellular core ABS pipe I've ever saw lol.... It's very unfortunate that solid core ABS is all but obsolete nowadays

[@Chrominance87]

That tee man. No.

[@fjcoughlin]

long commercial in the middle. no thanks. good bye.

[@bigglilwayne7050]

Everything you're doing here is wrong... The first thing I'd do is cut everything you did out, then tackle installing it all correctly....

[@shahkazemian3320]

🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️wtf

[@FilmsByJRP]

Dang Chris your about to hit 150K subs! And you only hit 100K two years ago! Sun count’s starting to speed up!

[@TipsNNTricks]

Thank you JRP, I've had a pizza party for a early celebration:)

[@FilmsByJRP]

@@TipsNNTricks man that pizza was so good!

[@TipsNNTricks]

@@FilmsByJRP I'm getting hungry again thinking about it:)