TISAS AVIATOR 1911 45acp range review.

Рет қаралды 4,856

Күн бұрын

Пікірлер: 74

@johncraine9082 11 ай бұрын

I think you are riding the slide down a bit when chambering a round. Pull it back and sling shot it forward aggressively and it'll load just fine. If you use plastic follower magazines or magazines with skirted followers like what came with it, you won't damage the aluminum ramp. In my experience it's the followers that damage the feed ramp not so much the ammo. Thanks for reviewing the Aviator and hope you do a follow up session. God Bless!

@2Afreedomrange 11 ай бұрын

Thanks for the info brother.GOD BLESS YOU.hopefully I can do a follow up soon.

@ladonnaghareeb4609 11 ай бұрын

Thank you for your testimony. It was appreciated. Stay safe.

@2Afreedomrange 11 ай бұрын

Thanks brother GOD BLESS YOU!

@ralphgreenjr.2466 7 ай бұрын

I am retired 30 year US Army and the 1911a1 was my side arm for 25 of those years years. I own quite a few and recently purchased a Tisas Night Stalker in 10mm. What good buy that was, The Aviator in .45 is my next buy. I do not like front serrations on a 1911 slide. I do like my off hand near the muzzle while charging the weapon. I normally use the slide release when putting in a fresh magazine. I use a 1911 as my carry weapon and always carry it in condition one (Cocker, locked, and one in the pipe). You made an excellent case that magazines DO matter!

@2Afreedomrange 7 ай бұрын

Thanks for the info. Thanks for your service GOD BLESS YOU friend!

@JoshuaMcclain-d2c 4 ай бұрын

You sir are a gem im glad to have to found your channel

@2Afreedomrange 4 ай бұрын

Thanks friend.

@settleschris1965 11 ай бұрын

I think by now Tisas is sponsoring the channel,lol. Great video brother!

@2Afreedomrange 11 ай бұрын

I sure wish they was it’s expensive making videos.thanks brother GOD BLESS YOU.

@settleschris1965 11 ай бұрын

@@2Afreedomrange it’s better that you are unbiased and honest.

@2Afreedomrange 11 ай бұрын

@@settleschris1965 yeah I agree.

@ericjohanson806 11 ай бұрын

Preciate the insight on the integral frame ramp. The overall feature set of this model is very attractive, so I’m looking forward to your follow up and hopefully successful long term data. GOD bless!

@2Afreedomrange 11 ай бұрын

Thanks friend.hopefully I can do a follow up soon.

@2Afreedomrange 11 ай бұрын

GOD BLESS YOU!

@spaceghost17 11 ай бұрын

Thanks for the review! looking forward to the follow-up. 😎💪🙏

@2Afreedomrange 11 ай бұрын

Thanks friend.hopefully I can do a follow up soon.

@cliftonwhittaker260 11 ай бұрын

I'd like to see what it will do just using the slide release when you are loading it. Doesn't matter much, because I've never seen one that about 100 rounds down range didn't cure that problem.

@2Afreedomrange 11 ай бұрын

I will be doing a follow up hopefully soon.

@GeneLitton 11 ай бұрын

Thanks!

@2Afreedomrange 11 ай бұрын

I really appreciate the support friend.

@johntimmins5564 10 ай бұрын

checking in. making sure your ok, friend. Haven't notices any new content recently..Wanted to let everyone know, Dunham sports is having a 3 day flash sale on Tisas 1911A1 .45acp for 319.00 tomorrow thru Sunday. I think that's a great deal

@2Afreedomrange 9 ай бұрын

Yeah I’ve not had much time for my channel lately with grandkids playing sports and work.

@frankbrowning328 11 ай бұрын

A good quality aluminum frame will last many thousands of rounds without worry so long as it is designed properly and made out of the correct alloy. 7.75 aluminum is actually stronger and more resistant to wear than some steels. The 2 best solutions (which have been implimented by several manufacturers) 1 Use a ramped barrel which eliminates a round hitting a feed ramp made of aluminum. 2 Install a steel feed ramp prior to the barrel and run a normal 1911 barrel. The actual wear on the rails will take many, many thousands of rounds to show any appreciable wear difference between steel and aluminum so long as a decent grade aluminum is used. Think of all the Sig duty pistols in the P series such as the P220, P226, P228, P229 that have survived 10's of thousands of rounds as duty, police and competitive shooting pistols and all of them have an aluminum frame as standard.

@2Afreedomrange 11 ай бұрын

Thanks for the info friend.

@frankbrowning328 11 ай бұрын

@@2Afreedomrange You're very welcome. GI've really been enjoying the channel. Lots of interesting topics

@clipper142 10 ай бұрын

M16s had aluminum frames in 6000 series aluminum, later upgraded to 7075 aluminum. Very tough stuff. Most modern aluminum frames are 7075.

@2Afreedomrange 9 ай бұрын

Thanks for the info friend.

@trekbsg 8 ай бұрын

It would be interesting to see how the aluminum feed ramp would hold up with a long term steady diet of fluted ammo.

@2Afreedomrange 8 ай бұрын

Yeah that’s true if the ammo wasn’t so expensive.

@SteveBarber1121 3 күн бұрын

Any feeding or ejection issues with fmj a year later? Did break in period resolve everything?

@glennwhisler8678 11 ай бұрын

Good informational video. It ran pretty decent for having the aluminum curse on it. That front bead site is the same as the M.A.C. (Military Armament Corp) 45acp. The rear site is the same larger rear site as the ‘Desperado’ line Tisas has in chrome plated steel. ….. The rear site on standard government models are smaller. The ‘Desperado’ (4.25in) and the ‘Regulator’ (5in) comes with 2 barrels, one in 9mm and a barrel in 38super.

@2Afreedomrange 11 ай бұрын

Thanks friend.I’ve been trying to get a Regulator not had any success yet.

@glennwhisler8678 11 ай бұрын

@@2Afreedomrange …. Looks like NO ONE has either of those chrome models. Gotta get on the ‘notify me list’ when they start making more of them.

@2Afreedomrange 11 ай бұрын

Yeah I’m on the wishlist.

@Cucurú-c9v 2 ай бұрын

The language Tisas uses to describe the guns ramp seems to me the frame is ramped. All 1911s frames are ramped, otherwise it wouldn't cycle. My friend bought one because he thought it was ramped. I showed him mine, which is the exact model he has, and the barrel is not ramped. I've shot aluminum framed Colt Commanders .45s for about 40 years and not a crack in the frame. I'd probably worry about an aluminum framed gun with a ramped barrel installed. In order to install a ramped barrel lots of metal needs to be removed. I doubt that would be a good idea, unless someone fancies a weakened frame. So I believe theirs a language barrier with Tisas description. I've seen lots of them and not one barrel was ramped.

@glennwhisler8678 11 ай бұрын

Brotherman! Tisas has a recall on 5 of their pistols for hammer drop. It wasn’t listed on the pages from parent import in Chatanooga yet.

@2Afreedomrange 10 ай бұрын

Thanks for the info. I’ve not seen anything about it yet but I will check into it friend.

@oldironsfury 11 ай бұрын

Looking forward to when you get the Tisas 1911 DS 😉🤜🤛

@2Afreedomrange 11 ай бұрын

I’m going to check with my local gun store and see if I can get one.

@oldironsfury 11 ай бұрын

@@2Afreedomrange awesome ! You take care 👍

@2Afreedomrange 11 ай бұрын

@@oldironsfury thanks 🙏.

@d.kuhlman 11 ай бұрын

Good video again. Not sure about that pistol not going into battery like it was doing...something is off somewhere. Possibly a burr or something in the throat of the barrell? Idk. Keep up the good work buddy.

@2Afreedomrange 11 ай бұрын

Thanks friend. I don’t see a burr not sure what it is yet.

@d.kuhlman 11 ай бұрын

@@2Afreedomrange kzbin.info/www/bejne/j4avoYaBeM6srMksi=2cLZwxjKMOxH1d0Q

@kevinstokes5214 9 ай бұрын

Not sure about the aluminum frame either. But seems to run fine. God Bless Brother!!

@2Afreedomrange 9 ай бұрын

That’s true I just don’t believe it would after hundreds of rounds run through it.GOD BLESS YOU BROTHER!

@SarahCollinsGoodNewsMelodies 11 ай бұрын

❤❤

@2Afreedomrange 11 ай бұрын

Thanks.

@robertseafield5810 11 ай бұрын

You need the longer plastic follower with the aluminum frames. The round feeds higher and doesnt hit the frame as much. Good review. Some autoloaders need a bit of break in. 200 rounds should do it.

@2Afreedomrange 11 ай бұрын

Thanks for the info and your comment friend.

@ryanblackburn4355 11 ай бұрын

Just use the slide lock/release

@2Afreedomrange 11 ай бұрын

I don’t believe that was the issue friend.

@user-xs5gb3ry4g 8 ай бұрын

That frame will take way more rounds than 90% of the owners will ever shoot through it. It makes it an ideal carry gun. Fully loaded it will weigh what an all steel Goverment model weighs empty. Like all ready mentioned, your loading technique seems to be the likely cause of the feed issues.

@2Afreedomrange 8 ай бұрын

Thanks for your comment friend.

@jessemalott1900 11 ай бұрын

I’m thinking long term down the road ( trouble ) !!!!

@2Afreedomrange 11 ай бұрын

That’s mine thinking also.

@johnklabechek8470 11 ай бұрын

I am going to guess you don't own any other .45acp 1911s. As most all 1911s in 45acp have the ramp on the frame as JMB designed it. The ramped barrel is a staple of the 9mm 1911....

@2Afreedomrange 11 ай бұрын

You would be guessing wrong I have several 1911 45acp.but I do agree with the rest of your comment. The point I was trying to make is I wouldn’t recommend any aluminum frame with the ramp.because aluminum is not a metal you would use in a high impact friction area.it can however stand some friction.but it will not last like a steel frame. I do really appreciate your comment though friend.