See and order this unit at www.redlinestands.com/catalog...
Пікірлер: 76
@carlrizzo64712 ай бұрын
I have a similar lift. All these videos take the screw out of the end of the lift arms, but my pieces slide out the back of the arm. No need to take out the screw. I think most of them work the same as mine. These are terrific lifts by the way.
@RedlineStands2 ай бұрын
I agree; they are really handy
@carlrizzo64712 ай бұрын
@@RedlineStands Thanks for taking the time to do the video, nice job. Folks like you really help me through some of these large purchases.
@RecktalBear Жыл бұрын
"The bottom half here, IS ALL BUISNESS". LOL Love it
@aaronthemartialmechanic8933 жыл бұрын
Are you able to remove a subframe using this lift or is there no clearance
@ctrfk87404 жыл бұрын
Nice . Looks similar to the Bendpak lift?
@RedlineStands4 жыл бұрын
Sort-of. I'm a BendPak dealer and I can sell you a BendPak, but if we're being honest here, get the Titan. Any time I have issues with a BendPak customer, getting the issue solved is like pulled teeth. Those guys have some major bounds to cover regarding their customer service before I can return to recommending them.
@luisalbertotrujillo49062 жыл бұрын
Exelente el video 👍 👌 que precio tiene 👍 yo vivo en colombia
@efrensautopaintingshop39175 жыл бұрын
DO WE HAVE IN THE PHILLIPINES
@commercialfishingnet21886 жыл бұрын
I never see one of these lifts with a full size 1500 pickup truck on it? I would like to see a video with one
@RedlineStands6 жыл бұрын
Sorry man, but we don't have that video request. To uncrate one and shoot that video would be a pretty big task.
@elgransaviosalmonsalami60775 жыл бұрын
Commercial fishing net yes you can put a light truck like dodge 1500 4 doors f150 navigator Expedition silverado I used one of those is good for brakes tire rotation radiator oil change just not transmission jobs or fuel pumps
@jedmeltonmusic6983 ай бұрын
Why didn’t your put a damn vehicle on it during this video then? I don’t understand there’s all these fucking reviews on shit but never a 1/2 ton truck on it to show how much underneath clearance you have. Complete waste of everyone’s damn time. This lift would be more than strong enough to lift a 1/2 1500 Chevy and other 1/2 tons.
@thcyazzie98443 жыл бұрын
Can this left a Nissan Titan? How much can this scissor left hold? Love the introduction. 👍
@RedlineStands3 жыл бұрын
Not sure. It can lift 6,600 lbs. I don't know what your truck weighs.
@thcyazzie98443 жыл бұрын
@@RedlineStands ok. Thank you. Keep up the good work.👍
@midnightsunturbo3 жыл бұрын
Is it safe to store a car on the lift long term? Can I get the lift to rest on the locking point.
@RedlineStands3 жыл бұрын
Sure to both questions. It's no problem at all. Steel isn't like wood. It won't get weaker with age, pending it's not rusting away outside.
@finaltouchautodetailingllc4 жыл бұрын
Does this have to go to the top before it can go down?
@RedlineStands4 жыл бұрын
No sir. You can disengage the safety locks at any height and begin to lower it.
@MSgtRazor6 жыл бұрын
what is the lowest ground clearance you can get by with this lift? looking to buy, need to know before hand
Do you have a showroom location so I can check it out?
@oscaralbertosilvero99286 жыл бұрын
Exelente tu fabricaccion muy bueno rtte
@dustingilmore27106 жыл бұрын
There is one showroom near Indianapolis. Most places, like ourselves, are shipping warehouses. That's why we try and make quality informative videos.
@kathleennawalt98556 жыл бұрын
Dear Redline, How about revealing where the particular lifts are manufactured. Some of Us customers PREFER to purchase American made. Thank You. Sincerely, Kathleen.
@dustingilmore27106 жыл бұрын
Dear Kathleen, we show all of that pertinent info on our website. Where most people prefer to shop. We happily offer American Made lifts, you just stumbled on one that isn't. Here's a link to make it easier. Thanks! www.redlinestands.com/catalog/ Granted, even companies like Challenger who produce American Made lifts still out source parts to China. Not much we can do about that.
@richardwilliams62565 жыл бұрын
AMEN!
@wasian45 жыл бұрын
Good luck with that...
@keithl97952 жыл бұрын
I can all but Guarantee that Kathleen's comment wasn't written on an American manufactured cell phone or laptop. People have real selective preferences.
@Aeneas1372 жыл бұрын
I don't know I kind of don't get it and I don't mean this to sound negative I just don't understand how useful it is when the unit takes up the entire undercarriage of the car how are you supposed to work on anything what's the advantage unless you just going to remove the wheels?
@RedlineStands2 жыл бұрын
Seems like most folks buying these are detailing cars, or doing stuff like tires and/or brake jobs. I personally would get a 2 post lift, but certain customers really like them at places like brake shops.
@jfalk352 жыл бұрын
@@RedlineStands 2 post lift is the best for ability to work under car without obstruction. BUT, you will need to bolt permanently to the floor. Now ask yourself what is obstructed. Not the engine, not the wheels, not the suspension, not the gas tank. Only the drive train, exhaust and maybe transmission. I would say the scissor lift will allow you to do 95% of most repairs.
@peterjoseph18515 жыл бұрын
I have a Dodge Viper that sits low. Do you have one that would work?
@RedlineStands5 жыл бұрын
Can't say sir. I don't know how low a Viper sits. Email us to sales@redlinestands.com with that spec and we'll look around
@elgransaviosalmonsalami60775 жыл бұрын
Peter Joseph you Can build a deck my friend did one of playwood for his corbette works great
@futurecolemaniii51916 жыл бұрын
Chris, great video...You were grunting like an old man when you bent down and I started laughing so hard...Here I am at 63 and I don't grunt that loud when bending over...lol...I am going to purchase this unit for my Christmas present to myself...Merry Christmas everybody...and especially to our Commander in Chief 'Mr President Trump" and Family...
@mms99666 жыл бұрын
Sexist,racist and abuser trumpard
@kathleennawalt98556 жыл бұрын
+mo jo, Just Go Away, "snowflake". Sincerely, NAWALT.
@mms99666 жыл бұрын
Lol another racist nawalt ,you must be one of those who when a man abuses you ,you love it, maybe you should meet up with Moore ,oh wait your too fcuking old lol
@dustingilmore27106 жыл бұрын
Mo Jo--Are you living on the same planet as the rest of us or are you a professional snowflake that trolls peoples comments and gets butthurt every time you see some one praise Trump? This is about shop equipment. Go cry to someone who actually cares please.
@scottcarlon63185 жыл бұрын
Hey mo jo, take that cnn ring out of your nose and learn how to think for your self.
@williewoods6972 жыл бұрын
What is the maximum height that the lift can lift?
@RedlineStands2 жыл бұрын
SPECS • Min width: 39.5" • Max width: 65.375" • Overall length: 82.75" • Lowered height: 5.5" • Max working height: 50.5" • 3' x 3' square tubing for x shaped lifting arms • Locking heights (position 1 - 6): 20.5" / 26.75" / 32" / 36.5" / 41" / 45" • Locking heights with adapter (position 1 - 6): 26" / 32.25" / 37.5" / 42" / 46.5" / 50.5"
@ernestobautista42096 жыл бұрын
cuanto cuesta y donde lo puedo comprar
@joecostu15713 жыл бұрын
Compra el 7000xl ese levanta una troca. El que esta aqui es el 5000 solo para carros chicos y medianos. Que no pesen mas de 5000. Libras. Aqui en usa se vende. Donde estas tu
@TheShowgunofHarlem3 жыл бұрын
Does anyone else thinks this looks very similar to the Harbor freight central hydraulics unit?
@coldwarconcealment3 жыл бұрын
Similar design but looks way more beefy
@wendelltaylor71295 жыл бұрын
How much is this lift?
@RedlineStands5 жыл бұрын
$2069 delivered with free freight up to $300 of shipping expense www.redlinestands.com/catalog/lifts-c-290/automotive-lifts-c-290_138/scissor-style-lifts-c-290_138_141/titan-sl6600-automotive-mid-rise-scissor-lift-p-2678
Depends. Yes and no. Remove a transmission? Probably not. Remove a differential? Probably so.
@chairmankim96285 жыл бұрын
Sure, if you want to die.
@jedmeltonmusic6983 ай бұрын
Does the damn thing lift a rig up high enough to sit in a mechanic roller chair and do a damn oil change etc? It’s like no one has ever thought to shoot a damn video of it actually being used for something useful, other than showing the lift going up and down.
@robertpatterson71823 жыл бұрын
You can't work on anything located under the middle of the vehicle because this lift is blocking it. Seems like a terrible design
@stence502 жыл бұрын
Yes but being portable it is a great alternative to a permanent mounted lift and you also don't need the height you need for a permanent mounted lift.
@chrisc68744 ай бұрын
$3500 and you cant work on the majority of the car underneath. good luck with that
@RedlineStands4 ай бұрын
The majority of folks that buy these lifts are doing brake jobs, selling wheels/tires, and also detail shops. Those buyers aren't really concerned with working underneath the car and they like that this lift is portable and doesn't anchor to the concrete, sir.