How to setup a live tool lathe | PUMA 2600 SY II | DN Solutions

[@rgetso]

Travis is very well spoken, knowledgeable, and likeable. He should do more videos.

[@socercrze]

I came here to say the same thing. His presence on screen is really enjoyable.

[@henryadrien9429]

you all prolly dont give a shit but does someone know of a trick to log back into an Instagram account?? I was stupid forgot the account password. I would appreciate any assistance you can give me.

[@jacedash8956]

@Henry Adrien instablaster :)

[@henryadrien9429]

@Jace Dash thanks so much for your reply. I got to the site through google and im trying it out now. I see it takes quite some time so I will reply here later with my results.

[@henryadrien9429]

@Jace Dash it did the trick and I now got access to my account again. Im so happy:D Thank you so much, you saved my ass !

[@patrickmartinez3217]

The biggest problem I have with this channel is there isn’t always enough substance in your videos, but this one proved me wrong! Great video, make more just like this one!

[@fryer05maverick31]

Absolutely correct about clearance issues on live tooling lathe.

[@jdrevenge]

Only Titans video that I think I've watched all the way through. Travis is a keeper.

[@juanvaldez4043]

I had the pleasure of setting up, programming and running a puma 1800sy. Absolutely loved it.

[@raivis2973]

Absolute pleasure to watch and listen.

[@nicksquillace2887]

Need more videos with this dude! Very easy to follow, great video.

[@deavall1]

This video is excellent - Great to hear about set up strike avoidance. Also, as advanced as the beat is, there are limitations. Being conscious of the right tool for the situation rather than a great tool, is a very insightful and experienced point of view. Good job guys👍

[@mw8580]

I used to use this model all the time, we had a milling job on it for Landrover ,It was the fastest way we could machine it. The one thing you must never have a smash on it, it will put all your parts out if the turret and sub spindle have moved. If you over work the driven tooling the tooth belt can wear out in the turret, we had this and had to slow the feed down. But a Great machine .

[@patrickholler352]

man i have been waiting for content on the 2600 i just started back in august programming setting up and running the same machine . really like seeing how others are making it happen

[@machineshop9276]

Travis,Titan it would be absolutely great to show a y axis grooving tool on the Puma 2600 , new machine new way to groove . You always showcase the very best in cutting edge tech .

[@tj9382]

Nice job Travis, succinct and clean in your explanation.

[@EZ_shop]

Good job Travis. Nice video with plenty of details on sub-spindle gotchas. Ciao, Marco.

[@travisjarrett2355]

Thank you my friend.

[@eugencsl]

I can definately afford that allen key 😂 great video 👍🏼

[@bearsrodshop7067]

Lov to see the Puma in action one day. Any tour's planned of the facility? Thx Travis, great camera work too.

[@Oyez10]

LOVE dual spindles! nothing will make you pucker up faster the first time you run a program at full rapids on one😁

[@jordanburch4003]

Well done Travis!

[@travisjarrett2355]

Thank you Jordan.

[@AndreiJipescu-k4j]

great video!quick question , how do you measure tool offset for a live tool ?

[@AlexLancashirePersonalView]

I will have to go and have a lie down after watching that.

[@aquibshaikh3840]

You guys are just amazing... it's my dream to work with you guys at 0.0001 tolerance.

[@jasoncaro218]

Just received my PRECISION .0001 shirt and it is awesome feels like a dri-fit shirt, super comfortable. Shirts are made of good quality material.

[@TITANSofCNC]

Quality Baby... Glad you like it.

[@MillTurn4Life]

My 2100SY has B Axis interference that pops up (SUPER ANNOYING) M110 to turn off. Does the old panelled 2600SY have it?

[@shawntownsend8278]

That's one hell of a machine I used to program a Ducson Puma live tooling and a tail stock it was a hell of a big machine it ran up to 12 feet long material 18 20 inches in diameter it was a beast

[@jatmiko9374]

very good explanation ..👍

[@multiHappyHacker]

That was an amazingly informative video.

[@CarlosGonzalez-kt5be]

Beautiful.. video !...thank yuo .

[@benbixel3252]

Great video, Thanks for info

[@ksanalyticalsystems2438]

Very useful tips!

[@samantoniak1657]

Is there a way to model and simulate the turret in mastercam?

[@travisjarrett2355]

There is. We have a specific machine post from Mastercam that simulates the turret and we use 3D models of the tools to populate it.

[@RobertWilliams-mk8pl]

I like this channel. One more clearance consideration is checking to see if your cut off tool will slice into your covers 😕. ...I just had to say that.

[@corny155]

What torque wrench are u guys using? Looks short…I’m looking for one right now

[@k5blaze84]

I'm surprised it isn't dual turret. The 1800sy I used to run was dual turret and dual spindle. The part change off was epic!

[@sandip.ahir1]

Amazing 👍

[@رضوانالصلوي-خ9ت]

Thank you dear. How mutch is this machine ?

[@jackmule1572]

00:00:12, is there cnc without s or y?

[@fishsticks88]

Having a y axis is the best thing ever

[@pm3577]

Why the 6 jaw on the sub spindle? It’s impossible to align your jaws when transferring short parts and the jaws have to mesh together on both chucks? (Not well written but you hopefully get my drift?)

[@sasaperas7406]

When will you post video about machining this part?

[@Assilidor]

Im wondering why you picked cnmg over wnmg? Wnmg has 6 cutting edges cnmg has 4 for the same price.

[@jasonbeatty9567]

CNMG has 8 if you know how to use them.

[@Assilidor]

@@jasonbeatty9567 yea but with their small parts u think they use the other sides to? Dont think so

[@jasonbeatty9567]

You can still face on a small Part.

[@Assilidor]

@@jasonbeatty9567 So whats the reason to pick cnmg over wnmg?

[@jasonbeatty9567]

@@Assilidor could be as simple as grade availability. I don’t know why they picked it.

[@ErickLopez-il7vp]

can you connect Mastercam to a Doosan CNC machine

[@master8laster49]

Great video, we are struggling a little on our Live Tool machines with alignment of the live tool holders, can you show how to align and dial in?

[@travisjarrett2355]

I imagine you are using VDI live tool holders? We use BMT tooling and so do not have to dial it in.

[@Lewisdowning_]

More of this machine please

[@85CEKR]

I wonder if that is the only option kennametal has for parting off, its pretty bulky, several other companies make holders that allow you to have as little as .600" between chucks when you parting off. That system seems pretty limited.

[@agm8088]

Good video. Must be grand when the boss supplies you with all the proper tools I program and set-up a Doosan 2100LY but bosses really haven't equiped it like it should be. Frustrating. I've programmed ans set up two, seven axis Mori DL-20, two turrets, two chucks that could work toghether. Great machines.

[@mitchdamp1258]

Wish I had those quick change tools in the 2600 ybII that I run

[@SirRootes]

Trust me bro, you don't. They might look pretty but on a sub spindle lathe they're just too bulky.

[@slavarecall8105]

Nice video

[@petarnikolic998]

How much does this machine cost brand new?

[@ErickLopez-il7vp]

how can i upload a Mastercam to a Doosan machine

[@njm24381]

Please Recommend torque wrench!

[@sch2406]

Hey what happens when you turn the wrench too change the jaws all the way and at the same time hit the chuck pedal??lol

[@heikikaring]

Can someome comment what is the cut off tool brand and model?

[@ytfan3815]

www.kennametal.com/in/en/products/fam.kgms-side-mount-50.100026769.html, ...... maybe the blade is a different brand ??

[@travisjarrett2355]

@@ytfan3815 It's Kennametal too. Longest one that will fit that holder. Just over an inch reach.

[@hugster5052]

Titan, when are you gonna do a crash/bloopers reel?!

[@TITANSofCNC]

Broke a tool in a beast mode cut a few videos back... It was epic. Beyond that I am very measured and calculated. If something happens, I will definitely show it😉

[@G33gcho]

Just 3 days to get new PUMA 2100 LYSii

[@kinglouiesshed8995]

Could you guys make a complete titanium 4 rotor boosted engine and help Rob Dahm make the worlds most powerful 🤷🏻‍♂️ It would be a brilliant video Probably the worlds biggest Rotary geek with industry and aerospace leading technology even get Tyson& Titan to help Rob get the most out of his machine 👌🏼

[@mdharper]

Button to button on the tool probe please

[@nathanellis3735]

Now program and set up a Swiss lathe

[@Unknown-1407]

I would love to work in a modern maschine shop like yours but i make make my eduction in a small german maschine shop. We have just a few maschines and they are not the best.

[@wllycious2000]

Many German companies have very old machinery, we earn the money in Germany, they invest it in Romania or Hungary. Industry and machining in Germany is dying a slow death.

[@joeborovina4769]

@@wllycious2000 sad to hear

[@mathiasolsen6577]

Boom

[@DolezalPetr]

Ah yes Travis, the hand wave guy

[@TommiHonkonen]

should be a ttsyy puma oooooof

[@culterobritwa7186]

GJ

[@علاءمعروف-ض5ذ]

اذا بتعرف عربي طبق برنامج خراطة داخلي وخارجي وطريقة تقدم الترس الثاني وتشغيل الطرف الاخر من المشغولة

[@mattiasarvidsson8522]

those "quick" change chucks can be a real pain to use.. I don't like them at all.. and you would most likely whack the machine if hitting the jaws .. tool is nothing compared to repairs;)

[@loukola5353]

All flash, no substance. It shows nothing of value.

[@John-100]

When you add tools, I was wondering how you add these tools to the tool menu page on the puma lathe? You add a tool and set it up on the tool menu page, calling out nose radius, insert angle, but how do you get to the menu page on your machine? DN solutions are very bad at getting this information out to the user. I got this machine at work, but no one can figure it out they are all Mazak guys.