I'm the only big ol', heavy, gross hunk that belongs on my bike
@TJBRUTALCUSTOMS6 ай бұрын
HAHAHA! OMG LOL! 😂😂😂😂
@ISAACSISAACS-w7v2 ай бұрын
best channel ive seen.u make it enjoyable to watch bro.ive learnt so much watching your vidz thanks
@TJBRUTALCUSTOMS2 ай бұрын
thanks so much dude!!!
@longdong38896 ай бұрын
I just bought a magna but should have got a shadow. Been watching you since the beginning, keep shining 👍
@TJBRUTALCUSTOMS6 ай бұрын
Bro, chop what ya got!!! or, sell that magna and get a shadow LOL
@bradmclaughlin90232 ай бұрын
I'm thinking about making a magna chopper out of one of the two I have. 🤘
@bradmclaughlin90232 ай бұрын
I'm thinking about making a magna chopper out of one of the two I have. 🤘
@caseyadams4376 ай бұрын
Your content is pure gold ! 😂❤😂❤ And the best top quality parts for the Honda!
@TJBRUTALCUSTOMS6 ай бұрын
Thanks so much Casey!! make sure to like and subscribe! it helps us out a ton! Thanks for the comment!
@caseyadams4376 ай бұрын
@@TJBRUTALCUSTOMS I’ve been subscribed brother! I got notifications on as well, I make sure to check out every post and hit that thumbs up!
@TJBRUTALCUSTOMS6 ай бұрын
@@caseyadams437 thank you so much dude!!! We will keep crankin em out!!
@nlee24925 ай бұрын
HAHAHAHAHAHA!!! The “Wilford Brimmley” had me literally LOL’ing!!!
@TJBRUTALCUSTOMS5 ай бұрын
DIABEETUS! FIGHT IT!
@kbangfpv62262 ай бұрын
Fuckin love these videos it’s like being in the shed with your mates
@TJBRUTALCUSTOMS2 ай бұрын
Thank you! 🍻
@ashinchor3 ай бұрын
I love this channel
@TJBRUTALCUSTOMS3 ай бұрын
Awwww thanks so much!!!! 🥰🥰🥰
@hondamotorsrider6 ай бұрын
excellent vids lately. I wish you would re-do the old VT600/VLX vids from years ago in this style.
@TJBRUTALCUSTOMS6 ай бұрын
which video would that be?! drop the link in the comments here and ill see what we can do man!
@hondamotorsrider5 ай бұрын
@@TJBRUTALCUSTOMS you probably don’t have the time (or desire) to, but in the groups we are always telling guys about which coolant lines they can eliminate and how. And maybe what jetting and fuel settings to start with when going with an aftermarket exhaust and stack. It’s always these questions over and over. It would be cool to just pin or drop a link to your video. Appreciate all you’ve done for the community, man.
@TJBRUTALCUSTOMS5 ай бұрын
@@hondamotorsrider thanks fir the feedback dude! What do you mean by pin or drop a link to a video? Can you go a but more in depth with that so I can understand a bit more? Thanks man!
@hondamotorsrider5 ай бұрын
@@TJBRUTALCUSTOMS in the FB groups when folks ask “can I remove these coolant lines?” or “I just swapped my exhaust and put a stack on, but my bike doesn’t run. What jets should I put in? How many turns should my mixture screw be?”, then I can just paste the link to your vids for it (and draw people to your brand). On the forums threads we could just “pin” them to the top of the results so that it’ll be easier for people to find them. 😎
@geraldsilveira83696 ай бұрын
Totally entertaining.. enjoyed 👍
@TJBRUTALCUSTOMS6 ай бұрын
Fuck yeah man thanks for the comment!!
@1badombre82Ай бұрын
Im.half way through doing my first hardtail on a kawasaki 650 and I got an idea that I wish I hadn't gotten because now I'm going always wonder that if. That's a stretched fake hardtail with an airbag. Definable going to on my next build and put super soft springs in my forks and run air lines to them too. Cut the kickstand off and just lay frame when I park 😎
@TJBRUTALCUSTOMSАй бұрын
👍
@lucky.t.7233Ай бұрын
I would like to see you do a chop on an 03 ace vt750
@TJBRUTALCUSTOMSАй бұрын
Thanks for the feedback! 🍻
@alexanderludwig28246 ай бұрын
Is there something similar for the VT1100 boys with dual shocks?
@TJBRUTALCUSTOMS6 ай бұрын
fun you should ask cuz we got rigid struts for you too! - shoptjbc.com/products/rigid-lowering-struts-for-vt750-and-vt1100?variant=23508201504826
@jflahz215 ай бұрын
I’m also a VT1100 boy. Chop or Die!!
@keithnorton58872 ай бұрын
So many “that’s what she said” moments in this video 🤣
@TJBRUTALCUSTOMS2 ай бұрын
😂🍻👍
@Felix_120219 күн бұрын
Complete beginner here. Why would you hardtail a bike? Just for style or does it have some use?
@nlee24925 ай бұрын
Oh… and could you do a video with the different sizes (height) of your T Bars, please! I’m wanting to get a set of those, and the Back Draft exhaust for my Phantom. But, not sure which height to buy.
@TJBRUTALCUSTOMS5 ай бұрын
Hmmm, ok, what would the video help viewers understand?
@ApexDubb5 ай бұрын
Hahahahahahaha TJ, the beginning of this video made me chuckle
@TJBRUTALCUSTOMS5 ай бұрын
If you're not laughing you're not doing choppercycler stuff right!!!
@ApexDubb5 ай бұрын
@@TJBRUTALCUSTOMS facts….
@davidmcguinness91876 ай бұрын
Thanks for the video
@TJBRUTALCUSTOMS6 ай бұрын
Thanks for the comment!
@jflahz216 ай бұрын
You’re the fucking man!!! How do I rake out my 1980 Honda Cx500c. 😂😂 but seriously. Help me TJB!!!
@TJBRUTALCUSTOMS6 ай бұрын
Youd honestly have to cut the frame and rake the neck but you'd also need to move the downtubes and the backbone a lil bit to go up and out or else get a long front end. Major fabrication undertaking there lol
@jflahz215 ай бұрын
You’re the man! Thanks for responding!!!
@KarenKelleylucky5 ай бұрын
HILARIOUS!!!!
@TJBRUTALCUSTOMS5 ай бұрын
Why thank you!!!!😄😄😄🍻🍻
@KarenKelleylucky5 ай бұрын
@@TJBRUTALCUSTOMS Reminded me of the movie Deuce Bigalow and the chic in the car with him. LOL! GOAT NIPPLE BITTER!!! LOL!
@eirinaiosvorkas59396 ай бұрын
hello brother i want one piece of this part but no send CYPRUS
@TJBRUTALCUSTOMS6 ай бұрын
Im so sorry man, if you reach out to customer service through the contact page, they might be able to help you out!
@scowlsmcjowls26266 ай бұрын
Aka the spine buster
@TJBRUTALCUSTOMS6 ай бұрын
Quit being a bitch n come on! 🤣🤣🤣
@scowlsmcjowls26266 ай бұрын
@@TJBRUTALCUSTOMS pain is good broken spine makes me feel like a man! Ya gotta have back bone to break it! 😆 sometime soft but cheeks is good😅
@TJBRUTALCUSTOMS6 ай бұрын
@@scowlsmcjowls2626 in all honesty I just drop the psi in my rear tire. Rides great
@MichealPena-j8n2 ай бұрын
Looking for relocation bracket for 95 vt1100.
@lucky.t.7233Ай бұрын
Do you make rigid bars for an 03 ace 750?
@TJBRUTALCUSTOMSАй бұрын
We carry Rigid Lowering Struts: shoptjbc.com/products/rigid-lowering-struts-for-vt750-and-vt1100?_pos=2&_sid=985ca7c9d&_ss=r
@nefreshwaters30895 ай бұрын
When are you gonna have those sexy slide covers back in stock?
@TJBRUTALCUSTOMS5 ай бұрын
They don't sell. No one buys them so they sit on the shelf forever. I'll do a poll on Instagram. GO vote!
@not8afraid5 ай бұрын
Thanks for the video. How do you handle the wiring process?🔥🔥
@TJBRUTALCUSTOMS5 ай бұрын
I havebother videos covering wiring. Whatever I don't need, i unplug.
@loveoflabor37806 ай бұрын
I’ve learned a lot from you but why no one ever tryed making the vt1100 chain drive ? No one ever tryed ☹️☹️
@TJBRUTALCUSTOMS6 ай бұрын
I habe covered this about 400 times. You would need to completely redesign the transmission on a ahaft drive to change the direction of the drive shaft. And you would lose a ton of power. Best way to convert a shaft drive to chain- sell the shaft drive, buy a chain drive bike lol
@loveoflabor37806 ай бұрын
Ok I get it the direction of the transmission spins opposite direction. I know you haved covered it but if the direction is opposite that a big problem
@TJBRUTALCUSTOMS6 ай бұрын
@@loveoflabor3780 no. Not opposite, completely different plane, and function. I'm not here to argue. Go spend all your time and energy undoing a shaft drive engine and trans. 🙌 If that's what makes you happy, bless you and enjoy.
@loveoflabor37806 ай бұрын
Nothing to get upset about thanks anyhow
@randym.72386 ай бұрын
Can u install strut and keep the bike body and rear fender stock on a 2002 model?
@TJBRUTALCUSTOMS6 ай бұрын
absolutely! The mono strut just allows the bike to be hardtailed without turning the frame into a rigid frame.
@dronepilot260rc2 ай бұрын
My rear shocks are so stiff on my 07 shadow 750 that it feels like a hard tail lol 😂
@TJBRUTALCUSTOMS2 ай бұрын
😂
@calebrodgers33285 ай бұрын
Amazing, the comfort of a hardtail with the looks of a softtail. This fucking sucks 😂
@Eternalmastersclips3 ай бұрын
what if i want to make it higher.whats the process?
@TJBRUTALCUSTOMS3 ай бұрын
have another J?
@rextheripper5 ай бұрын
One thing I'm wondering is what do you end up doing with the fuel pump that's under the stock seat? Im looking at the entire mono-strut kit you offer and Im interested, but I cant seem to find anything about relocating or removing the fuel pump/filter that's under there. What's your recommendation and what are my options?
@@TJBRUTALCUSTOMS bro, i met him one time- in wisconin at an icp in-store. He was doing little interviews with people in line, he asked me a few questions.. This was 2000, or so.. i so wish i got a picture with him. Loving your 'new' content btw- i remember emailing you a while ago- but im sure im not the only one who said you should make content like this- finally got me a motovan, hopefully bring the ol scoot down to cali sometime soon!
@damianorossi331611 күн бұрын
yo man, what handlebars is that? I cant find it on your site, it’s a zombieperformance prob?
@TJBRUTALCUSTOMS10 күн бұрын
they were some old ones we had
@johnjwade5 ай бұрын
Random somewhat related question...Have you or do you recommend a hard sided bagger kit for the VT750s?
@TJBRUTALCUSTOMS5 ай бұрын
What is a "bagger kit"? I'm the last guy you wanna ask about bagger stuff. 🤣 I am not a fan, but do you, brosephus, if it makes you happy, rock on! 🍻🍻
@madebywadeca5 ай бұрын
Thanks man. Just trying to be a bit more comfy for a long ride coming up.
@TJBRUTALCUSTOMS5 ай бұрын
@@madebywadeca ok. But make sure you say brotherrrr a lot and yell "raise hell praise Dale" so everyone knows you're not one of those bagger types. 🤣 Just get one of the big biltwell bags and strap it to a sissy bar, works great fir long rides
@madebywadeca5 ай бұрын
@@TJBRUTALCUSTOMS A sissybar would help. These days it still a flat pack and bungee cords on the rear fender.
@TheArtisanTouch5 ай бұрын
No cussing family friendly here 😂
@TJBRUTALCUSTOMS5 ай бұрын
🤣🤣🤣 im an adult, and to be safe. the channel is not marked as a recommendation for children 🙏🏽 adults feel free to enjoy!
@TheArtisanTouch5 ай бұрын
@@TJBRUTALCUSTOMS I’m joking 😂
@TJBRUTALCUSTOMS5 ай бұрын
@@TheArtisanTouch I'm fucking not 🤣🤣🤣🤣
@TheArtisanTouch5 ай бұрын
@@TJBRUTALCUSTOMS well fk
@TJBRUTALCUSTOMS5 ай бұрын
@@TheArtisanTouch fuckin A brochacho! Hahahaha!! Shiiiiit
@WendellJones-f6d5 ай бұрын
I got a new chain and sprockets went to change them and I can not get the axle out let me tell you I don't think it has ever been changed any way I can get it out without messing it up
@TJBRUTALCUSTOMS5 ай бұрын
yes you use a brass drift to tap the axle out. be careful. if its THAT stuck your swingarm may be bent. doubtful, but ive seen it happen..
@WendellJones-f6d5 ай бұрын
@@TJBRUTALCUSTOMS I bought the bike it has been setting in a garage for a few years but when I take the nut off of it I can clamp vice grips on the spacer and can barely turn the axle with a ratchet I figured I might have to heat it but that could mess bearings up and seals you gat a lot of experience with these bikes thanks for the info I been staying on your website I love the parts I've got so far from you I'll be back in contact for some pipes and handle bars soon I want it to look like one of your bikes I love them thanks again
@TJBRUTALCUSTOMS5 ай бұрын
@@WendellJones-f6d ok first, vice grips need to stay away from the bike. Spay some panther piss on it if you want, but just get a long brass round bar and start tapping it out. Rust, dirt, old grease can really glue things together. Heat is not gonna help you here.
@WendellJones-f6d5 ай бұрын
That's what I'll do my next order is going to be your high low pipes got to take the stock pipes off to be able to get a good straight hit on the axle will help to so I'm going to check my funds and go ahead and order them s.a.p@@TJBRUTALCUSTOMS
@michaelburrito1779Ай бұрын
Get square tubing mesure holes and you have you’ve saved $80
@TJBRUTALCUSTOMS29 күн бұрын
And then it bends cuz it hollow, but who cares right!?
@willpeacock95506 ай бұрын
Your Vocabulary is vast
@TJBRUTALCUSTOMS6 ай бұрын
haha!!! Thanks brother!
@kaplangunhan92983 ай бұрын
Who else thought that the tripod was the sissy bar at first..
@TJBRUTALCUSTOMS3 ай бұрын
🤣🤣🤣 I just realized that! Lol! Sorry about that!
@scowlsmcjowls26266 ай бұрын
You forgot the internal torqure wrench😂
@TJBRUTALCUSTOMS6 ай бұрын
🤣🤣
@Zaddywelds5 ай бұрын
Funny as shit lmao
@TJBRUTALCUSTOMS5 ай бұрын
Thanks for the comment man!! 😎😎
@danielrickel88076 ай бұрын
Enjoy the back pain you modification gives you
@TJBRUTALCUSTOMS6 ай бұрын
Thanks for the comment, negative Nancy! 🍻cheers!
@sativasteve1861Ай бұрын
🤣🤣🤣🤣😭😭
@TJBRUTALCUSTOMSАй бұрын
@lucyfuir63862 ай бұрын
Why would you do this. Just buy a hard tail. You are ruining a perfectly good motorcycle
@MichealPena-j8n2 ай бұрын
Free will
@lucyfuir63862 ай бұрын
@@MichealPena-j8n Just because you can do something doesn't mean you should.
@komolodanger13182 ай бұрын
Money can bye everything but not everyboby can't build all the fun Things.
@TJBRUTALCUSTOMS2 ай бұрын
because i fuckin want to! and so do thousands of other people. 😀 youre entitled to your opinion too. no ones telling you you have to do it.
@lucyfuir63862 ай бұрын
@@TJBRUTALCUSTOMS I legitimately want to know why you wouldn't just buy a hard tail in the first place I'm asking for real not trying to be a jack ass