Cleaning and refill TK-5240 Kyocera toner cartridge. Chip replace. This toner cartridge is compatible with the following Kyocera color printers and MFP's: ECOSYS M5526, ECOSYS P5026. Thanks for watching!
Пікірлер: 30
@maxibush8540 Жыл бұрын
Hi ! For making a quality check of print with KYOCERA: Can I swap sets of all 4 cartridges that are filled to various degrees in this printer without getting into trouble? Let’s say Original 6-20%, Refill A (100%) Refill B (50-60%), all cartridges fitted with their chips respectively. Will the counters in the chips keep track correctly, or will a 100% cartridge suddenly show „replacement“ because of the swapping? Thanks for your great video that does not leave one question open. One think to ad maybe: My refill supplier told me not to mix different brands of toner, so emptying of toner compartment and not only of waste, would be a good idea.
@GIMIKBG Жыл бұрын
You can swap them withot trouble!
@VentasKronadico Жыл бұрын
requiero saber si se puede recargar de la misma forma el TK-5442 DE KYOCERA
@GIMIKBG Жыл бұрын
Yes!
@azimuti5552 жыл бұрын
great video! I put a new compatible, but eata giving the message tonar not genuine, what can I do? it wasn't recharge, it's new compatible! is the chip defective? the machine works but stops all the time!
@GIMIKBG2 жыл бұрын
Sure, it is from the chip!
@azimuti5552 жыл бұрын
@@GIMIKBG ahhh!!! Ok!! I will buy 1 separate chip! boy, i'm in brazil, we work more with small machines, the hp85a toner is what we do most, do you have a good tip for blacker printing?
@luisalbertosanchezcastillo5572 жыл бұрын
Que es ese polvo azul que le saca al cartucho??
@GIMIKBG2 жыл бұрын
This is the waste toner.
@JannekKn Жыл бұрын
hi, from where do you get the new chip to replace? Any recomendations for the powder inside those cartridges, or just get anything?
@GIMIKBG Жыл бұрын
Hello! the use of a chip in this cartridge is optional. I get them from a local supplier, and I don't know the manufacturer's name. The toner I use is integral.
@JannekKn Жыл бұрын
thanks a lot! do i should just leave the old original chip on?@@GIMIKBG
@rado.raoliarisoademada Жыл бұрын
Thanks, Can I to know the name of this powder toner do you use, pleas
@GIMIKBG Жыл бұрын
It is no brand toner. I am bying it from a local suplier! Sory i cant help you!
@jaimewencellramirezjan75762 жыл бұрын
buenos dias, cuanto de toner le pones ?
@GIMIKBG2 жыл бұрын
Hi. For C,M,Y - 45g. for K - 70g.
@sabineanoko34902 жыл бұрын
Bonjour, où vous procurez-vous la poudre de toner TK-5240 ? Merci
@GIMIKBG Жыл бұрын
From suplier here, in Bulgaria!
@rijlanlovepet2793 Жыл бұрын
Hallo, apakah setiap catridge itu juga tempat limbah tonernya ?
@GIMIKBG Жыл бұрын
Yes, it is!
@rijlanlovepet2793 Жыл бұрын
Thank you
@shevek95052 жыл бұрын
Hi Overthere, great video but how do you get the original plug off? And are you reusing the original plug to seal the cartridge or is this a separate brand? Where would I get those? Thx in advance
@GIMIKBG2 жыл бұрын
When the toner cartridge is original, I use a soldering iron to drill a hole. When I am ready with the filling, I close the hole with warm silicone.
@shevek95052 жыл бұрын
@@GIMIKBG Yeah have heard this before, but that's not how it's done in the video? There's a plug used at the top and I thought what a great idea this is :-) One other thing though: Some other guy mentioned to me that the lower part of the cartridge is for tonerwaste and burned toner, so he recommended emptying it in the refillprocess too.
@GIMIKBG2 жыл бұрын
Yes, it must be emptying!
@shevek95052 жыл бұрын
Sorry, I missed that you're already doin' this in the first part of your vid. I thougth you just emptied the upper part.
@GIMIKBG2 жыл бұрын
No problem! Its OK. :))
@sandraz55982 жыл бұрын
Y el chip como se cambia ?🤔
@GIMIKBG2 жыл бұрын
It is simply glued to the toner cartridge. You remove the old one and glue the new one. Thanks for your comment!
@Hordunjimmy87555 ай бұрын
In a situation where am unable to get the chip to replace.Please what can I do