MikroTik Tutorial 64 - Use your router to get internet from another router wirelessly

[@ryanlea750]

These videos are so good! I just keep coming back to them.

[@TKSJa]

Glad you enjoy it!

[@kirdref9431]

It does not work for me (win10 client connects but says "no internet"), even when I bridge both wlan0 and wlan1, as another poster suggested. At 3:55 , my setup (from quickset). has the value "station pseudobridge" not "station bridge". Any ideas? UPDATE: changing to "station bridge" is definitely wrong -- the whole connection to the upstream wifi disappears (as seen in quickset). I am on ROS 7.13 version. UPDATE2: Got it to work. It may have been a DNS setup problem, not sure what I did to fix it.

[@eroloner7765]

Hi TKSJa, Thanks a lot for your superb tutorials! I just wanted to let you know that you forgot to put WLAN-1 in the Bridge together with the ethernet ports and WLAN-2. Without WLAN-1 also in the bridge, it will not work on my RB951G-2HnD Thanks again!

[@grayfarao1529]

very nice man. i learn something new every time from your videos

[@TKSJa]

Thank you

[@odeseusX]

Thanks for the great video. I was able to use my Mikrotik RB7512HnD as an extender to my TPLINK WR941 main router with this tutorial. I am able to access the TPLINK router externally with the ISP provided public IP for remote management and monitoring purposes; however, is there a way for me to access the MikrotIk range extender too for remotely managing it?

[@paulmacgiollacaoine8619]

Great video thanks. I have two Mikrotik LHG2 devices that I'd like to connect via a layer 3 point to point connection, what wireless mode should I be using?

[@bobcolly2329]

Thank you soo much Rasta man, u are a lifesaver, Great Teacher.👌

[@TKSJa]

You are very welcome

[@techtraveler4421]

These are great videos!. Could you please put one together about routing to cloud services? Or anything to do with BGP would also be appreciated. Thank you.

[@TKSJa]

Noted

[@darkfish299]

Thank you bro now my wifi connection is better

[@voiceoftruth1O1]

Great tutorial. Please can you make a video about mikrotik router that broadcast website, video over local network without access internet. Only local network. I didn't find any tutorial with this tropics. Thanks for your tutorial.

[@TKSJa]

Thank you and I will add this to my list

[@cirusMEDIA]

Yes please, i have been trying to do something like that for years ..lol

[@shamirkayum2815]

I learn so much from your videos, thanks a lot. Please do some video on routing (static)

[@TKSJa]

Added to my list

[@eroloner7765]

Hi again, Could you please share what Firewall configuration would be needed to protect the connection created through WLAN-1? I am willing to use this setup to connect to an unsecured public Wifi. Thanks a lot.

[@EzequielRegaldo]

Im trying to do this with hAP lite and didnt work (connecting to IPS's router). What can i do ? :(

[@EzequielRegaldo]

Solved wirh firmware update

[@agelualofa]

love your work brother. Love it all

Great video. Thanks. What if I want to connect two MikroTik Cloud Router Switch 212-1G-10S-1S+IN with fiber optic?

[@andytsixlakis6623]

dear TKSJa is this tutorial applicable to the follwing scenario ? modem/router (NON MIKROTIK) connecting wirelessly to HAP LITE tc ? i would like the mikrotik to have its own wireless net as well as its own DHCP - tried all the steps but no luck....also the wlan1 shows as station and not statio bridge

[@forrealcrazygettolifesouth5060]

hi need help setting up my mikrotik groove 52 when i go into my cpe all the avaible networks pop up when i say connected to the network it tell me "error in wifi passwoord -taxt with at least 8 and 64 symbols expected

[@mariastoianova1765]

Bro do you have a video how to do this through ethernet?

[@markarca6360]

It will also work also with Mikrotik hAP ac2 and the newly introduced hAP ac3.

[@hajjiturbanos7990]

I would like to ask u use tjis method is there a bandwidth lose to the isp?

[@witkamashele3538]

Can you also do WDS

[@gentoocaneify]

Great lesson. I realize this is a basic, one subject, but how does one "layer" a security profile on router2 on the scenario (specifically, a Mikrotik router)? Much regard!

[@TKSJa]

Check out this video on setting up WIFI kzbin.info/www/bejne/rKW6i6Cefpd9q8k

[@IfereUbi-b1w]

I want to connect a 951 to 2011uias as an AP, using wired connection. Any thought on the config?

[@markshaz8691]

Brilliant tutorial man, thanks

[@emmanuelodota]

Is this the same as setting up a repeater?

[@kamen0s22]

Hello mate, I have 2 houses in a distance of 500 meters, one my house have internet but the other no. Can you please tell me what i need to buy so i can have inter on my other house so i can connect my phone and smart tvs. thanks

[@juliusoirisha]

You can buy a light beam and receive data from the other house

[@alupci]

Superb explanation!

[@marekrabas3065]

Very nice tutorial. Unfortunately I cannot connect with my SXTsq 5 ac to Unifi UAP-AC-PRO by this way.

[@TKSJa]

Thanks

[@challenger5775]

great tutorial. waiting your tutorial for client connection with bytes capping limitation. thanks

[@TKSJa]

Thank you and I will add this to my list.

[@hajjiturbanos7990]

In set up like thus is there a bandwidth lose or not?

[@tent-pegsolutionslimited7599]

this is very helpful up to date

[@boborg13]

hi! in this setup, can clients also connect to the wifi from the main router (the internet providing router)? so this is basically a WDS setup?

[@TKSJa]

Yes they can connect to the wifi, but only through the virtual AP.

[@Antonio-hx6vw]

Great tutorial-- THANKS

[@jayson8116]

Nice video, can this be done in long range connection?

[@TKSJa]

+Jayson Sato Sure

[@jayson8116]

I have a basebox 2 unit do you think they can communicate for 1km distance? or i need additional antenna?

[@marcusc3463]

@@jayson8116 You will need an additional set of antennas. The basebox will provide wireless for the surrounding area 10 to 30 meters depending on what it has to broadcast through (materials of the building). You will need another set of wireless radio units to provide a link from your primary location to the satellite location

[@eeetube1234]

When I select CPE mode instead of "Home AP" - WinBox disconnects and I am not able to continue configuration. I have to reset router to be able to connect to it, but it is in "Home AP" mode after reset :(

[@eeetube1234]

To fix the issue - I had to connect to router using MAC instead of IP address.

[@jasonhall3661]

You saved my bacon! Thank you!

[@jakirbasha69]

can i say it as configuring mikrotik router as a repeater

[@TKSJa]

Yes

[@MajbourGaming]

Bro i am using x86 linux based 5.20 mikrotik Os cracked but i need cloud hosted managment but cloud hosted is avail in v6x+ and i dont need to use virtual or vmware for mikrotik i install though cd i need cloud hosted how is possible? X86 v6.36 cracked iso do you have? Any solution

[@TKSJa]

Purchase a license.

[@challenger5775]

additional request. tutorial for multicast configuration

[@TKSJa]

+Reden Dimaano Explain with some more details

[@challenger5775]

using igmp proxy. multicast streaming. from multicast sender(like vlc)going to mikrotik to multicast receiver.

[@TKSJa]

I don't any videos on this topic. This info my help goo.gl/ndvGxm

[@dandyrivera6167]

SIR HOW TO ADD WIFI IN THIS CONNECTION

[@balakbebas796]

My ping is spiking hardcore on the mikrotik help pls

[@LifeStyleTechnologyZa]

Second router has no internet ,what might I have done wrong?

[@TKSJa]

Check the gateway address

[@armandvanzyl3392]

Do I need to do the basic configuration first? I followed this tutorial step by step yet I can’t get it to work, do I maybe need to update my router or what else can cause this problem? Thanks for the help in advance. EDIT: Under the wireless tab I can’t select the Band, I can only choose the channel width and select a country. Edit x2: I get an internet connection via the ports but I still don’t even see the wireless connection available when I look for it on my phone so maybe there is a problem with the bridge? Or what else could it be?

[@TKSJa]

What type of router are you using?

[@armandvanzyl3392]

TKSJa a MikroTik RB951-2n

[@jacobfriesen7078]

Can't output internet through cable

[@DRAMAVIDEOMAKER]

Thank you

[@TKSJa]

You are welcome

[@XR400vsGS12]

thanks bro

[@TKSJa]

Welcome

[@abiolaolaleye1134]

xie xie ni

[@jeannotm.ngweji9655]

nice tutorial but u got it so badly explained. u should have been showing from what router you were logged in first ect... thanks anyway

[@TKSJa]

Yes, you are right

[@r_lonef]

you don't explain enough, doesn't work