yamaha fzs1000 1st gen fz1 healtech quick shift install

[@marksparks59]

Thanks for uploading this, I am thinking of fitting a quickshift to my gen 1 FZS1000.

[@eaglescout5816]

Nice video, tks for taking the time and effort to up load this.

[@thomasblake7046]

Just about to do this to my 01. Thank you!

[@timmi7624]

Hey nice Video 👍 Question : is it for up and down or only up Shift ? Thanks and BR from Germany

[@backyardmechanical]

its generally for upshifts. you can use it for downshift in a scenario where you are accelerating up a hill in 4th 5th or sixth and want to downshift to accelerate up the hill, but not for downshifts when slowing down coming into a corner or to a stop

[@db3170]

Sir can you downshift as well and are you still pleased with the upgrade thank you for your input very informative.

[@backyardmechanical]

the downshift works but its not an ideal feature, as in the feature only really works if your in say 6th 5th or 4th and want to downshift under throttle it works ok, but not really for hard deceleration down shifting due to no auto blip to match the rpm.. otherwise i use it pretty much every time i ride and its great, only thing i had to do was fine tune the delay from 80ms to about 100ms as my fz1 is a little notchy on shifting and would occasionally miss shift but since raising the shift delay its been working spot on, i love using it on fast take offs the shift is superfast and even using it on mild takeoffs you don't need to be full throttle or rev it right out, as long as you shift over say 3000rpm with medium throttle its still fast and smooth shifts

[@MegaBlack70]

Hello, I drive a Fz1 and have installed the Healtech Quickshifter. Could you please send me a picture of the app settings? Thank you.

[@backyardmechanical]

hi, unfortunately i dont have the bike anymore and the app setting are not available unless its connected to the unit, sorry

[@thejockey5666]

re bonjour l'ami peux tu me montré les réglages que tu a mis pour ta moto je viens de l'installer je cherche encore le bon réglages sa fonction bien mais defois quand je passe la 4eme sa prend pas bien a haut si tu peux m'envoyer tes réglages pour que je compare

[@eaglescout5816]

Bike sounds good!

[@anthonyrofkahr8949]

Very nice video! I think I’m gonna buy this quick shifter setup. I like your mirrors, what did you use to plug the mounting holes from the old mirrors? I can’t find any online.

[@backyardmechanical]

the original fairing mount mirrors, i just cut a oval shape into a piece of old fairing plastic painted them and used small black round head bolts to bolt them through the fairing and bracket

[@dene1196]

What kind of exhaust do you have? Sounds good.

[@backyardmechanical]

its a delkevic try oval muffler

[@sulli2025]

Hey man! Just got the same quickshifter! Where abouts are you located in aus? Would be great to ask a few questions!

[@backyardmechanical]

im in western sydney

[@thejockey5666]

salut chère amis est tu toujours satisfait de ton shifter ?

[@backyardmechanical]

yes

[@thomasblake7046]

Hey, if you don't mind me asking, what handlebars are those?

[@backyardmechanical]

they are aftermarket bars off ebay, they are very close to the original bars just slightly less pull back. the original bars were bent from a car knocking it over and they were the closest i could find to original without paying oem yamaha prices.

[@mitchellgarland4171]

Hey mate I have the same fzs would you be able bto show me what kit you used with part numbers

[@backyardmechanical]

the unit is a iqse-1, the fzs harness is a QSH-P2T

[@mitchellgarland4171]

Do you know if you can use the series 2 module ?

[@backyardmechanical]

@@mitchellgarland4171 as far as i know IQSE-1 - is for newer style TCI (transistor controlled ignitions) - . the IQSE-2 is for older - CDI capacity discharge ignitions and points style ignitions like 2 stroke dirt bikes without battery or charging systems

[@chantalxdebruijn]

Can you tell me your setup ?

[@backyardmechanical]

the quick shift? its a healtech iqse-1, the fzs harness is a QSH-P2T

[@chantalxdebruijn]

@@backyardmechanical no im sorry, im from holland so its difficult to say what i mean, but you need to setup the app how soon de quickshift need to react and stuff. Do you know where you put everyting on ?

[@backyardmechanical]

@@chantalxdebruijn ahh ok. unfortunately i dont have the bike anymore, i did keep the quick shift, however i cannot remember the app settings, i can find out but i would need to connect power to the unit to connect the app to read the settings

[@anthblackab6625]

Don't waste your money on healtech shift

[@backyardmechanical]

why is it shit? ive had this quick shift on 3 different bikes now and no issue. i will say its moderately overprice