TMNT ARCADE RESTORE - Konami K7000 Shutdown fix - PART #1 - Teenage Mutant Ninja Turtles

Like the vids? Sponsor John's Arcade!: / johnsarcade
Enjoy the vids? Consider supporting me! Thank you, John! youtube.stream...
John's Arcade branded parts kits at www.iankellogg.com - Support John's Arcade by buying super high quality kits. Why shop anywhere else?
In this video we are going to start restoration work on the Teenage Mutant Ninja Turtles arcade game. This is 4p Konami cabinet with the single speaker hole. It's currently converted to a Williams High Impact Football. The 25" K7000 monitor is currently dead. In this video we will try to fix it and the SEGA Powerdrift arcade game.
Topics covered:
#1 - Troubleshooting steps for a dead arcade game
#2 - Diagnosing a Wells Gardner K7000 that is going into HV shutdown
#3 - Removing D10 to verify HV shutdown on a K7000
#4 - Replacing cap C57 on a K7000 to fix HV shutdown
#5 - Reflowing solder on a K7000 to fix HV shutdown
#6 - Testing 5v on an arcade game PCB
#7 - Williams High Impact gameplay
And much more!

[@vi3telit3]

Turtles is my greatest source of childhood nostalgia. I can't believe you're finally doing it! Thanks John!

[@XB3Gaming]

I picked up a Neo Geo MVS 2-25 recently that I will be restoring and I've been watching your videos for a lot of tips and tricks and things to watch out for while I work on my cab. Thanks for the great info!

[@PersianImm0rtal]

You are like the fucking Bob Ross of renovating and repairing arcade games. God it's so satisfying to watch you bring these games back to life.

[@mokthemagicman]

Hi John. I'm a pin guy so here is my advice on LED mod for your Ecto-1. You can purchase leds that flash on their own when power is sent to them. They even have changing color leds if you like. Most LED pin mods you just use wires, hide them down the nearest hole and alligator clip them to the GI light that under the play field. That way if you ever sell your pin or need to quickly remove it, you can. Some people hook them up to the flasher so it only goes off when certain events happen.

[@JomasterTheSecond]

I'm so happy you're replacing the green buttons with purple ones!! That tickles all my aesthetic fancies.

[@ThomasBryant]

Another great video John. I have to say that I live my nostalgic arcade life watching your videos. Ever since I was a preteen in the mid 80's my grandmother would drive me to a number of different arcades in our area... different strip malls and plaza's and such. I lived my weekends at many arcades and after school (teen years) with my friends playing the NES and SNES. I spent all of my allowance money to play Qbert, Pacman, Excitebike, Tron, Star Wars. I am now a dad, my son is 6 and I bring him to the arcades (whats left of them when I can) Your pure enthusiasm, knowledge and positive energy truly inspire me to learn to restore one myself. I may never acquire the knowledge and skill that you have restoring great cabinets and games, and thats ok. But watching you bring a game "back from the dead" seriously brings me so much joy, its hard to put into words. I am priveledged and honored to be able to watch these videos and hopefully one day my son can watch (and understand) them too. Perhaps he may restore a cabinet.... something I could never accomplish. THANK YOU!! *Hand shake* Tom, NY

[@thomascampr]

AWESOME John. You needed another fun driving game.

[@OHTHANKY0U]

Doing a TMNT restore myself. In 92 it was kitted to a NBA jam. Rewired it and now it back. Just waiting on sideart. Picking up 6 more games today

[@beastoldone7623]

John When checking your fuses, lift one end out of the clip. Just checking them in the fuse clip is not 100% reliable, there is a possibility the resistance of the circuit the fuse is in will be low enough to make your meter beep. Great videos, I watch every week.

[@TheStevenWhiting]

Always loved the Teenage Mutant Ninja Turtle 4 player.

[@gto8202]

John, I just stated a complete 4 player X-men restore last week. Excellent Vid man!!! Keep up the great work.

[@cwgraham78]

Would you ever consider doing a Multi PCB Cabinet in this High Impact? I went to a arcade parts store locally the other day and they had a converted Turtles cabinet (Along with Firefox, Dragons Lair, and what he said was Steve Smith's personal Journey) he was going to restore. I asked him what he was going to do with the Turtles and he said he was considering making it a Multi Superhero cabinet, with TMNT, TMNT2, Spider-Man and X-Men 4P . Good idea?

[@peaky123]

Thanks John for single-handedly getting me interested in Arcade games. If I had the space and the money I'm sure I would have bought a few already haha. Maybe a MAME cab one day at least...

[@DarthMarino]

High Impact is a classic. The sequel/update Super High Impact is a bit better but you can't go wrong with the original. This was Ed Boons first video game. Eugene Jarvis worked on it. Dan Forden ("Toasty!" from Mortal Kombat) did the sound. The announcer is non other than Steve Ritchie (same voice he used for the announcer in the Rollergames pinball). It's a nice compliment to your new Mortal Kombat cabinet.

[@PecanPie1102]

I miss Adam or Ian that helped you out on the yellow space game. Incredibly smart. Yo go Bro.

[@TheHOTROCKIN]

Hi John, your videos have been such a brilliant resource over the years. I’ve learned so much from watching you fix, restore and troubleshoot. Like you I had always wanted a Konami 4 player in my collection, but living in the U.K. made it very hard to find one. I did recently manage to import a completely beaten up (empty) 4 player Konami cab. It was in a very sorry state, especially the control panel. In short I’m part way through turning it in to a Turtles. Like yours this is also a single speaker cab which coincidently was also originally a Crime Fighters, which was then hacked into a Konami Fishing game! It was missing everything by the time I got it. I’m just wondering was there ever a Part 2 to this video series or even any pictures of how your restore turned out? Thanks again for all that you have done to help others in this hobby/madness 😊

[@darktetsuya]

oh you did get the [name redacted] cabinet! :P and agreed on the 'taking photos' tip -- I had a USB joystick I had to replace a microswitch on, and luckily I had a photo of the microswitch when it was still connected so I could remember which wire went where. (and the joystick thing did kinda happen to me too I forgot where the switches went so I had them set wrong, lol so I just had to have the stick open while I swapped them around, LOL) Also, I assume 'EJB' is Ed Boon and 'MJT' is Mark Turmell, right? anyway so far so good! can't wait to see the next update on TMNT!

[@susanfit47]

The High Impact Football arcade game cabinet was originally a 4-player Konami cabinet. It was specially Crime Fighters that later convert into a Teenage Mutant Ninja Turtles arcade cabinet.

[@eyyojung]

Great to see Power Drift here. The basement need more Yu Suzuki games!

[@c0pyimitati0n]

I work at a headshop and I convinced my boss to get a pinball machine. He bought an Elvira pinball but ended up having too many problems for a retail setting so he took it home and we now have a brand new Walking Dead pinball machine. The game is so intense and play MUCH more smoothly than Elvira did. Elvira was about $4000 and Walking Dead was about $5500.

[@mihoshiproductions9809]

If you decide to keep the High Impact Football PCB, see if it is a quick ROM swap to Super High Impact Football as I tend to like that version better then the original and it just came out a year later so it's like to use the same PCB. Looking forward to seeing more of the turtles restore though.

[@Darryl603]

I say leave the football game for now and continue on fixing the drift. The future is bright for the monitor. In your mind, the ninja turtles is better than the football as far as value? Interested to hear what you think...

[@CaptAwesumNo1Zone]

I know what you mean about that "era" and I'm liking that Football game, this is why arcade sports games ruled compared to realistic console sport games

[@wakkowarner123]

Ooh, you got Power Drift, too! Nice :)

[@RichardHollowayGaming]

I agree with the changed monitor, it does looked crammed in!

[@andrewodonnell3942]

Digging those boots buddy @9.24 - huge fan of your channel from Scotland

[@chuck12-82]

John you are right, the original has a 19" monitor and also has a blue Bezel with pictures of all the Tracks Displayed

[@1Soniccool]

Hey John I have a MAME emulator on my Dad's Samsung Galaxy Note 4 and I have Bucky O'hare and NBA Jam TE. Bucky O'hare is like the Ninja Turtles the graphics are amazing and the sound is good. And NBA Jam TE is a add on for the original NBA Jam. Konami did a Bucky O'hare NES game but it is different from the arcade. That High Impact Football you got there can be use for another cabinet. I did not even Know that Williams made a football arcade game that looks like a NFL Blitz clone.

[@Duke_Togo_G13]

YOU GOT THE POWER DRIFT!! SWEEEEEET!

[@rioluthegreat6525]

Duke Togo - Pitchokey666 IKR

[@dj3stripes]

Just a heads up. Ian's website is now a malware portal. Do not click.

[@PecanPie1102]

Definitely a whole cap kit. I remember when you changed the yellow 1972 space game (like asteroids) and that worked a whole lot more "tighter" not just one. i spent 12 hours watching every single vid.

[@Andronicus87]

"I HAFTA TOUCH THE MONITOR IT'S FILTHY! DOH!!!" John has to touch everything I swear lol! That sure was a pisser lol. Whats funny is that John didn't even touch monitor screen just the glass above it and somehow it broke when he put his hand on the protective glass.

[@sewashburn0529]

Keep High Impact Football for the parties.

[@TheTurnipKing]

Could still be playing blind. If the sound is dead, there's no way to tell. Might be worthwhile getting a Gonbes board and an cheap old VGA monitor to rig up a portable test monitor. Not just for this specific game, but for any time you've got a suspect monitor. In the meantime, the obvious test would be to see if you can get Power Drift to display on the K7000 next door.

[@thicklyspread]

I have watched your shows for over a 2 years, and it has encouraged me to build my own mame cabinet, because of space, and enjoy the fun stuff you get upto. But was wondering what are your thoughts on emulated pinball in all it's forms?

[@terrencelabroix5272]

Hey John , any chance you guys would consider a live John's arcade or AO from Grinkfest , during the tourney? I remember a couple years ago you did an AO podcast live once everyone was "good and liquor'ed up." One of your best by far!

[@Johnsarcade]

Of course! We will do at least two podcasts live from Grinkers. For sure! :)

[@cym3712]

Hey man I am a big fan of your channel, dude you are awesome you deserve a ton more subs for the amount of awesome editing you do. Keep up the good work!!! :)

[@Johnsarcade]

Thanks much! Means a lot!

[@vbaros22]

John you ask us a lot on what we think, or what we want to do while you fix or play the arcade. Any chance for a live stream repair/let's play video with you ant the crew? Maybe an annual arcade party live stream with guest that have helped you in previous vids? Enjoying the vids, back to the MK soon?

[@ryanwilson8634]

I believe the bezel of the power drift showed each of the tracks.

[@poadwish]

Hey John, Great show I had the same issue with my hantarex crt worked the first time I plugged it in and then no neck glow - had to recap it , loving the 90s games m8 - Oh and by the way .... I have a popcorn machine buddy and it gets the same amount of love as my Jamma cabinet ;@) at the end of all your shows the popcorn machine is there man, it never needs repairs and gives you popcorn pleasure on demand pal, so its about time you gave it the popcorn love it deserves ... hehe take care

[@johnvictor9071]

I say use Football as your test PCB while you get everything else restored. And when you finally pull everything out for the full cleaning, you can put in Turtles.

[@etchmfg]

There's a high-pitched squeal in the background on this one, maybe it's from the monitor or something?

[@JordanBaizeMinistries]

john I just love your videos! please keep them coming.

[@Motoskichimo1974]

You know, if you have a car battery around. you can always use the ground on that if you need a sure ground. I've done that plenty of times.

[@MrZ281980]

did you ever switch the playfield in your whirlwind? that would make a good video series .for people buying pinball machines for a great deal because the playfield is hosed.show them what is really involved in doing a complete swap .

[@notjux]

It hurts me so much that there was a yellow joystick for Mike on that arcade cab.

[@mrburns366]

notjux why?

[@raymondmatsumoto7111]

Dude happy you listened to me and bought PowerDrift! now buy Pong and Final Fight by Capcom next and your arcades complete! and come visit us in Tokyo

[@mikegreiling]

damn, there’s no part 2? I’ve got a TMNT restore that I’ve been wanting to do myself and was so excited to see a video of your own project, but it looks like it never materialized. Hope you eventually return to finish it!

[@MystiqEevee]

I think he did it off camera because eventually he put turtles in the hangar

[@Chuck-RETROGAMECAVE]

John, You are brave buying so many machines this close to winter. Do you leave cabs in the garage all winter? I'm working on 3 cabs and bring them all in doors for the winter. Doing all the messy stuff outside now and then wiring this winter.

[@smt8461]

5:22 JOHN: THEY CRAMPED A 25 INCH MONITOR IN HERE! ME: THE MONITOR IS FROM A MIDWAY GAME

[@TheTurnipKing]

1:55 Aw, sweet. I was hoping it was going to be that one. It needs more love! Save it from the scrapheap, it deserves it!

[@WinSchutten]

I got a broken xbox 360 from a friend of mine a few years back. I did the tacky reflow thing by putting the PCB in the oven, which worked a little while and then I pushed it too far trying to fix it permanently... Just now I got the idea of doing it manually with a solder iron.. Would have taken soem time, but hey, free 360..

[@tigheklory]

Great job John! surprised you didn't test the VR while you had the board out. glad it was just the cap. :-)

[@Johnsarcade]

VR?!

[@tigheklory]

the Voltage regulator

[@jerezer2009]

Now I know how to test my b+ on my k7000 thanks John. I learned something today.

[@n.h.s.a.d.m.]

Great troubleshooting on that monitor!

[@FordWMaverick]

Could you put a switcher in the Turtles cabinet like in your DK2 to keep both Turtles and the football game? It would be kind of a weird combo, but it's a good way to have two 4-player games in a limited space.

[@Skylance87]

Heck yes! I've been waiting for this one :D

[@Meekimotosyoutubechannel]

good voltage is 5.15v. Some older games like Cruis'n usa and Pacman like a voltage closer to 5.0v. Seems like the game got bumped and kicked for the monitor not working.. still watching and throwing a guess early

[@clocky4209]

Hey, I've noticed on a bunch of arcade monitors, the screen has this bar/line moving up and down. What is that? Can it be distracting in gameplay? Can you adjust the monitor to where it stays still? What is it and what does it mean??

[@ENTERTAINMENT35]

Didn't know you could check the fuses that way... And the voltage on the board the way you did either.... Learn something every day.... So it's been 2 years since this video, did you ever get it to work??

[@Johnsarcade]

This is still an ongoing project. Soon

[@Meekimotosyoutubechannel]

Is that the same MK2 you did the 14 episodes on and didnt notice the switch on the control board? Did you use the monitor from this driving game for mk2?

[@MystiqEevee]

You would be correct with the bezel thing however i am not sure if it was a bezel with a 25 inch or 19 inch monitor as you said I am assuming 19 tho

[@delsarcade]

I recognize the classic Midway sounds. I hear T2:Judgement Day, Smash TV and Total Carnage. Also, the high score list looks just like Smash TV. :-)

[@mrburns366]

Don't forget Narc :)

[@slo74786]

Love your videos. John--off topic but did you ever do a proper 2 player review of Balloon Fight for your Red Tent? I saw one old vid but that game is supposed to be the pinnacle of Nintendo vs collecting right? I'm curious how fun it is with 2 players.

[@MrHarney]

Great buy .....power drift is a great game ...and on a 25" screen bonus

[@hannonm]

"When in Doubt. Old caps out"

[@Johnsarcade]

#NEXTVIDEO

[@SlyTheFloof]

john can we talk i have something to tell you

[@hannonm]

this was worth a second watch. and i bet the caps on the other one are shot too

[@Johnsarcade]

Amy Marie I think next garage video will be Monitorpalooza

[@Darryl603]

It's interesting to logically narrow a fault down and more rewarding to know you used your own knowledge to systematically run down the problem rather that just shot gunning everything, There's more to gain there in the long run. I would bet my last dollar that it was the bad solder joints on the fly back anyway, since the problem showed up after the game warmed up a bit.

[@theorgandude]

john, thx for the upload, look forward to watching it later this evening. I'm curious, how many GB of footage do you shoot in an average weekend? From the camera, before editing. It must be stupendous, what with 60fps and so many hours of recording. Appreciate all the hard work. just thought I'd mention that power drift was a big success in weymouth uk. there was a sit-down version that had pride of place in the middle of the arcade and the whole seat was articulated and move up and down on hydraulics. my mate was pretty good at it.

[@FrostyMikeGaming]

John, I have a Dynamo arcade and it's a 25' and I have a question about the monitor. Since it's a CRT does that monitor support VGA hookup? I've seen a few Wells Gardner 25' monitor that has VGA in it and do all Wells Gardner has that or no? The reason why i'm asking is because i'm using a Pandora's Box 4s+ and it has VGA to hook it up but i'm just using the regular jamma and I think the picture isn't sharp enough and the color is green yellow and it's not bright colors.

[@Johnsarcade]

some of the later models might have a VGA hook-up but in general most do not, they are CGA. There are converters out there but I have never tried.

[@FrostyMikeGaming]

Yeah I don't know if mine has VGA in it and I just bought that dynamo cabinet this week so I can test this Pandora's box out but I notice the color was kinda dual like not being to bright so I don't know if that's the way it suppose to be. I just notice i see green and yellow tint in the games and I know the picture is set perfectly but I haven't mess with the colors yet. Now for the adapter to VGA that your talking about I will have to give that a try and see if that works. Thanks for the feedback help. :)

[@WinSchutten]

If you could only have one or two cabinets.. Why not pad hack a couple of Dreamcast controlelrs (take a 3rd party with all digital buttons because the analog triggers are tricky). So you can have a Dreamcast cabinet. Since Sega made their arcade hardware the same as their dreamcast hardware (except the Dreamcast had less RAM). So if you like the Sega Noami games, make a dreamcast arcade cabinet. So you can have one cabinet and still have several games in actual hardware..

[@photoboy1976]

Capacitor 57... Wasn't that a Wesley Snipes movie?

[@mrarcade9565]

I seat what you did there, pretty fly

[@craiggilchrist4223]

You could really use a re-flow oven John. Make your life so much easier.

[@pinmandan5164]

Yes John, the TMNT restore is going to be awesome ! I'm actually going through the same thing very soon, I have an original TMNT cabinet that was switched to NBA JAM. Mine doesn't have a bezel inside the glass at all, did they come from factory with the cardboard paper as yours has ?

[@Johnsarcade]

+PinMan Dan I think the bezel should be plastic.

[@dvv45]

Hey John saw full side art and control panel overlay for 165 on ebay . not a bad deal.

[@jasonhojara3244]

Put the power drift monitor into the MK2 so it's all "legit" Midway hardware!

[@ScanlineCity]

Yo John! Help me out here....do I need to worry about language or region when buying a turtles pcb?

[@Johnsarcade]

No, you don't. They will all work on Jamma. I think I had an Oceania version PCB?

[@MinorLG]

I don't hear speaker hum, but I do hear bad HV squeal. In fact, I can barely focus enough to actually listen to what you are saying when it is switched on. It to me sounds exactly like dead/dying CRT, a sound I Hated in Highschool.

[@cypherljk]

John, What tool was that you used to remove the bad cap? It's not a soldering iron and was very noisy

[@MystiqEevee]

It's a hakko desoldering iron/gun they're way more efficient then a soldapullit but are way more expensive

[@greysondeane4000]

Is there any chance you could do a video on finding arcade and pins and how you get in contact with these operaters for warehouse raids it would be much appreciated for a person trying to get into arcades as a hobby

[@Johnsarcade]

I need to do this. It keeps coming up over and over.

[@webdoc90]

The cards should go in your order from iankellog kinda like Bob sends moon pies.

[@eightballpaul]

Bucky O'hara! lol Sorry was funny.

[@VAX1970]

PART #1 - Teenage Mutant Ninja Turtles? Why did we not even play it john? Really wanted to see that board installed :(

[@Johnsarcade]

LOL! I wanted to enjoy the Football game before I removed it. I did a TMNT complete playthrough and here: kzbin.info/www/bejne/eGbchqKGna16hNk

[@VAX1970]

John's Arcade Game Reviews & Tech Thanks M8!

[@danielcopeland390]

Steve Ritchie is the announcer and the spiked hair with shades guy in high impact football

[@Johnsarcade]

Ha. That's awesome. I need to look again!

[@johnnygumballdotcom]

hey john ... i loved you as Micky in the Goonies

[@Johnsarcade]

Lol. I've been getting the Sean Astin comments since my early 20s. :) RUDY!

[@johnnygumballdotcom]

been wanting an arcade for years , but too scared cuz i knew when it breaks down im screwed,,,, watching your videos makes me want to go for it ... i bought 2 very high end coin pushers (saga classic cars and a double elvis ) they sell for $8,000 each .. i paid $500 for both because they have what i believe to be minor issues .. if not i have 2 really nice big ass night lights

[@johnnygumballdotcom]

btw one is 73 inches tall and the other is 83 inches tall.. and both over 440 lbs

[@ArcadeFreak-gw5rp]

hey john great video once again i have a question on the. car game i noticed you checked the 5 volts to the board but you didnt check the 12 volts for the sound so the power supply may still be bad and the board may actually be good just a suggestion.if there is no 12 volts your not gonna get sound so the game may be playing may be just a monitor problem keep up the good work

[@Johnsarcade]

Oh, good point! :)

[@TheTurnipKing]

Might seem unlikely for the sound and the monitor to go at once, but care to bet against the sound going first and the game staying on location afterwards until the monitor finally went?

[@ArcadeFreak-gw5rp]

TheTurnipKing i agree the 12 volts probably went so there goes the sound then they most likely just kept the thing there with no sound then the monitor went dead so they pulled it

[@homersarcade5950]

Great info here. Love your channel. I'm currently in planning stage of opening an arcade. Just bought my first machine. Do you work on claw machines and redemption games? Looking for more info on them as well.

[@Johnsarcade]

I have no experience with those types of machines, yet....

[@homersarcade5950]

John's Arcade Game Reviews & Tech oh ok didn't hurt to ask. I haven't bought a video cabinet yet. That will probably be my next purchase. I'm searching Craigslist daily.

[@homersarcade5950]

John's Arcade Game Reviews & Tech could you accept me on your forum. I signed up the other day. Thanks

[@kins749]

Ah, John, I was hoping you'd bought that bootleg Pong game instead. Disappointed, although Power Drift is a cool game as well.

[@kristoferhanssonaspman3879]

I saw the unlisted teaser on twitter so I knew he didn't but I'm keeping my fingers crossed he will go back to the warehouse and pick it up. I think it will be a nice restore project. Just as Computer Space, the kind of troubleshooting will be a bit different from the more modern games. As opposed to Computer Space, though, the game is likely less documented. John.... You know you want it! :)

[@kristoferhanssonaspman3879]

Of course, I am still looking forward to see the two cabs in the video being restored.

[@erikafermaints-perez9501]

Hi there. Do you have any videos on how to fix a jumping screen?

[@HaroldsStuff]

Power Drift, great game!

[@WastingMyPotential]

John, start a route and you keep everything you don't have space for in the basement....

[@steve24822]

Rochester in Kent, I'm in Kent too!

[@andrewbutler9533]

Hope you get Turtles in Time! I think it's superior to the original. Used to have it on the Super Nintendo and loved it. Keep up the great work! P.S. as I'm from the UK it pains me to see an American 'Football' game in a Turtles cab! ;-)

[@Johnsarcade]

I had the TIT PCB. I did a complete playthrough. kzbin.info/www/bejne/fqTKkpiAbNR_fKc

[@silentbob151a]

As soon as he touched it the picture died lmao!

[@duckyvirus]

I will drive down there (circo 8hrs approx from Canada) to clean that popcorn machine... it needs it lol. BTW, i cannot buy your album :( none of the sites will sell to a canadian :(

[@grimisti14]

"Part 1 of the last crime fighter cabinet known to exist convert to a tmnt by a green maniac"

[@grimisti14]

Power drift is actually a really cool game

[@Johnsarcade]

Ha. :) It's just a 4p Konami cabinet. :D

[@richardherzog5405]

+John's Arcade Game Reviews & Tech John check out the game CARNEVIL. Its a really cool shooter . Check out the gameplay. Be a great game for the basement.

[@richardherzog5405]

+John's Arcade Game Reviews & Tech Please don't ruin the basement by removing your great 80s classics for crap like TNMT and other 90s garbage.

[@FlannelGuy_1978]

Love this series, do you know if there are going to be more parts to this restore?

[@Johnsarcade]

+jjohnston 2004 yes. Soon. :) When it gets warmer.

[@BarrySlisk]

Soon....riiight..... :)

[@DREQON2005]

I went and found this on my coin ops cause of this video I knew nothing of this I love it it’s like tecmo bowl with better graphics

[@Chuck-RETROGAMECAVE]

I have Konami 4 player 2 speaker cab. that I want to make into a simpsons or Xmen. haven't decided so it's just plain for now. Started out as a simpsons and was converted by an operator into a killer instinct . no sideart. I'll have to create a new cp top.

[@lionneko]

it's Bucky O Hare John. not Bucky O Harea lol

[@ThatGeekDude]

Haha... still no progress in cleaning the popcorn machine? :)

[@MystiqEevee]

Lol in the skyskipper reveal video the wobbly table makes it fall on the ground and it broke XD

[@dashrendar8739]

Super High Impact Football is a great game. U just have to learn to play it.