How to Change Shower Glass Seal

[@georgioskarmiris288]

Tack så mycket! Riktigt bra instruktion. Jag var hopplöst med installationen

[@KSToh]

Nice! Please like video and subscribe !

[@Marina-vb9by]

Thank you. I have a gap between the shower door and hinge that has been leaking since I moved in. Today it dawned on me, that there’s likely a seal that exists for these issues, but I wasn’t sure what it was looking at the different types available, so now I know! Thanks again

[@KSToh]

Great. Please like and subscribe

[@TheManOnTheRadio]

Great video that helped me put a seal and sweep on my glass shower door. The original installation did not include a sweep or seals. Please tell me what the music was that accompanies this video. Very professional presentation.

[@KSToh]

Glad it helped. I forgot what music, sorry! Please like and subscribe.

[@andref1793]

Most peaceful video I’ve watched

[@KSToh]

🤷🏻‍♂️ please like video and subscribe!

[@dm9152]

I had a Glass Warehouse (model number: GW-B-GH-34CH 58x34 inch) frameless glass hinged tub door installed. It did not come with a rubber seal for the vertical part of the hinged area where the door hinges are that allow the small door to open and close. We bought the vertical seal online and added it. It had to be cut into pieces to fit on either side of the oversized chrome hinges. (The short door that opens and closes has a bottom sweep seal that came with the glass.) The shower seems to leak through the two oversized hinges mostly and the water also finds its' way between the gaps around the hinge in the vertical rubber seal onto the floor. Like a little stream that we put towels down on the floor to catch as we try and solve this problem! My questions: is there a way to seal the gap in the hinges? Also the installer put the wider part of the h seal on the inside of the shower glass. I see in your video example the wider part of the vertical h seal is on the outside. Would this make a difference for us if we changed the positioning? But the real trick is sealing up the oversized hinges and filling those gaps with silicon would look awful and not allow the hinges to work properly (opening and closing the small door) is my guess. (Here is our model number: GW-B-GH-34CH 58x34 inch frameless glass hinged tub door.) Any help or suggestions greatly appreciated!

[@KSToh]

I have the same problem actually. Haha. As for the orientation of the seal at the hinge, why don't you try various ways and see which works best?

[@nareshiyer9495]

That's a very informative video .can u pls tell me wheres this available ?any online links ? pls do post it here. Thanks

[@KSToh]

Get from your local hardware shop. The online ones tend to be the soft type. Where are you located? Please like the video. 😬

[@nareshiyer9495]

@@KSToh i am located at Chennai . What about you ?

[@KSToh]

@@nareshiyer9495 I am In Singapore. You need to go to your local hardware store.

[@nareshiyer9495]

@@KSToh well here we dont get it in the local hardware store as such 😊anyways will check on it .thanks for all the info .cheers

[@wwakkoppakko]

For the "h" shape, which side is the out side and which is inside?

[@KSToh]

No fixed side. Up to you. Depending on what you need.

[@PabloTheThinker]

For the vertical h type sweep, does the fin go in the inside of outside of the shower?

[@KSToh]

I think both are fine. Depends on where you want the water to drop.

[@cardsfan5100]

Thanks, this is just what I need.

[@KSToh]

Cool. Please subscribe.

[@Lianna-56]

So informative I loved it🫶

[@KSToh]

Glad you liked it!! Please like video and subscribe!

[@mowahershey60]

Thanks for sharing, this has made my research super easy.

[@KSToh]

Glad it was helpful! Please subscribe!

[@teddiesbe]

Can you show how to attach the strip onto the hinged door ?

[@KSToh]

if you are referring to the side of the door with hinges, I basically cut the strip into three parts.

[@jocelyndeguzman1989]

Thank you !!

[@KSToh]

You're welcome! Please like and subscribe!

[@ACEKING26]

any scissor works?

[@KSToh]

You can use any scissors but should be strong pair of scissors.

[@cabuffal0]

Hi, can you let me know which D type are you using for the Door open side? Thanks for the great video.

[@KSToh]

For most doors, I am actually using the “h” type. It’s only when the door and fixed panel are not 180 degrees that I use “D” type.

[@cabuffal0]

@@KSToh Thanks for getting back to me. My door is at 135 degrees around. I'm wondering what "D" type looks like. I searched and didn't find out.

[@KSToh]

Oh. In my video, I used the term D-Shape. It’s shown in my video.

[@aneliwood1482]

Thank you for the video! It helps me fix my door problem

[@KSToh]

Glad it helped! Please like and subscribe!

[@roderickpullen4102]

Some narration would be better. It helps understanding what is being done.

[@KSToh]

True. Apologies.

[@laurenspang]

Very good 👍

[@KSToh]

Thank you! Cheers! Please subscribe.