WE WENT FOR THE MONSTER! CAN THIS BE THE ONE!!??

In today's video we are trying it again... i hhave been buying again and it's HUGE!!
What do you think? Good buy? Should have repaired the old one?
Let me know and thanks for watching as always
Hope you enjoy!
A huge thank you for Mick Clayton for staying open a little later for Penny to pick the Manitou brackets up.
Penny's Company - www.paulclegg....
Ollys KZbin - / ollyblogsagricontractf...
Order "MAKE HAY WHILE THE SUN SHINES" NOW!!
PLACKITT & BOOTH BOOKSELLERS - Signed: bit.ly/3oV8Amc
WHSMITH - Signed: bit.ly/3ILYlZr
AMAZON: amzn.to/3s0NyEV
WATERSTONES: bit.ly/320PrX0
Get your "Tom Pemberton Farm Life" merch -
www.tompem-farm...
Follow me on
Instagram - / tompemberton_farmlife
Facebook - www.facebook.c...
Twitter - / tpfarmlife
Snapchat - pemb6
Website - www.pembertonsf...
Enquiries - [e-mail]
If you would like to find the Farm shop or send something that way the address is:
Birks Farm
Ballam road
Lytham
Lancashire
FY8 4NL
KIT I USE -
(If you use these links it helps me out and cost you nothing more, Thanks :D)
The Best Drone Ever! - amzn.to/2PR5c9t
GoPro Hero 7 - amzn.to/2DnKTdq
GoPro Hero 8 - amzn.to/36Cs3MD
Rodes Mic Pro - amzn.to/2EqxO3P (If you can, Get the wind muffler with it)
Camera - amzn.to/2I2e3EG
Gorilla Try-pod - amzn.to/2SmtTi7
New Try-pod i'm playing with - amzn.to/2OS9wsB
Still Shots Try-pod - amzn.to/2Dt8Q2W
The Bag I Never Take Off - amzn.to/2BuziJA
Bib And Brace I Wear - amzn.to/2rN6OZG
Time Lapse Camera im trying for the build - amzn.to/3tCVbys
Cheaper Time Lapse Camera im trying also - amzn.to/3uJ9RO3
MY AMAZON STORE -www.amazon.co....

[@OllyBlogsAgricontractfarmer]

What a legend of a driver olly is 🤣🤣🤣

[@TomPembertonFarmLife]

😂 could have done a video about the Yaris on its own!

[@leebarber5528]

@@TomPembertonFarmLife What till you get your ranger Tom then do an off road car link up that would be cool

[@TomPembertonFarmLife]

@@leebarber5528 yes Lee!!

[@garethevans8924]

The block of silage should be lower than the frame of grab makes it easier on grab and leaves a clean face

[@lawrencecaile]

Tom I wouldn't buy a Rangerover in the fitst place.

[@cheriecronin7688]

Happy Father's day ya'll

[@thescottishferminloon7425]

Good choice. They dont like to break down for sure

[@thepeanutgallery1699]

"FEED ME SEYMOUR!" you need to name it Audrey 3

[@ajjames1498]

With these fuel prices? Bye bye Range Rover

[@HappyComfort]

It would be awesome if you could show about 30 seconds to a minute of some cute cows 🐄 in every video. Like at the very end 😍👍🐄🐄🐄🦦🐄🐄🐄 lol

[@dayvewatson8596]

Yay shere3 grabb Yay fumms up

[@Dommo1997]

Id 100% swap the range rover in for yaris GR thats gunna be the best car for value to come out of the 21st century

[@lukesutherland2915]

Tom you don’t get it. definitely not an ordinary Yaris. Dream car right there, absolute pocket rocket

[@PAYNEKILLER..]

Got to love Olly for driving that car like it stole his lunch, what a Mench

[@joeseels]

As if that sticker is still on the car! Your dad must like it 😂😂😀

[@TomPembertonFarmLife]

😂

[@JDMz]

Toyota yaris GR is phenomenal. More reliable than a range rover too lol

[@harrybowman306]

Tom, keep the boom stationary as you lower the blade on the shear grab, helps to reduce the size of the void you find under the clean cut from the knives👍

[@SvenLippens1]

Or maybe even put some down pressure on the grab before lowering the blade since the blade is trying to lift the grab when cutting

[@aaronwyse1455]

@@SvenLippens1 that's what I do

[@carlbous]

I looks like a combination of the downward pressure of the rams and a bit of slap in the pins letting it lift up. Like other people have said, boom down maybe before closing grab

[@antonioortiz8443]

Tom, what you really needed was a rotating roller scraper….which mixes the feed as you go down with it! Also it wouldn’t hurt safety wise if you were to clean all your windows on your tractor's so you can see better!

[@janettehutton8634]

I’ve got an ordinary Yaris (the new model) and when you press the sport button it’s rapid. So that must be an absolute beast.

[@richardedgar3447]

Now we now why farmers say they never have any money, it’s because they spend it all on tyres for their Toyota Yaris!! 🤣🤣🤣

[@TomPembertonFarmLife]

😂

[@sam-P90]

That gr yaris looks so much fun! Can see olly getting shares in pirelli lol

[@OllyBlogsAgricontractfarmer]

It’s on mitchlins

[@robertstibz9506]

Mobile water tank for cattle drinking is what you need, ref; Tuesdays vid. knock one up, that can be moved with the cows. bingo.

[@mcrow7623]

the hardox tines the tips can b sharpened and it does help and aslong as the knife is sharpened with a buffing disc will leave it alot cleaner again

[@benedmonston1982]

Hey Tom, you could have just removed the manitou bracket off one of the old 3 you have rather than buy another new one?

[@nsgkuaov]

TILT BACK after you close the grab its a shear grab not a tooth grab.

[@krat5576]

I would pick the toyota anytime. Range rovers are for old people who dont want to feel or notice a bump when they drive over as cyclist.

[@tomharper2709]

It’s not a Yaris🤣. It’s the same as the Hyundai I30n - WRC competitors have to have some ‘rally spec’ cars in their production line

[@nagasako7]

I got fix for a guy I know. J. Clarkson. You need Japanese Katanas at face of sheer grab! EZ.

[@marjoriebell4956]

It’s amazing all the machines needed to farm, can’t imagine that all being done by hand in days of yore. Blessings on you, your family and all the animals 😇💜

[@kinze2010]

The Best you can get Albutts are. But I only say that because they are only made a few miles down the road from me in Gloucestershire. There attachments are designed and made by a Farming Family so who best to do farm attachments

[@olivercooney6645]

You buy shite you buy twice never buy anything blind off ebay

[@voxxag8054]

If olly hasn’t welded it, it’ll be ok! Joking not joking! #seenhiswelding

[@OllyBlogsAgricontractfarmer]

Cheeky

[@nancybobb3954]

Greetings from Eastern Museum of Motor Racing! Oley made donuts yea! Love to watch Tom have some fun! Museum is located in York Springs Pennsylvania USA

[@OllyBlogsAgricontractfarmer]

Road trip @tompembertonfarmlife

[@McCarthy-Farming]

If you edge the blade of the sheer grab and the centre blade it will help to have a cleaner cut and don’t move the the boom when taking a bite of silage.

[@nortonmolly]

Please don’t turn your head away from the microphone. It’s hard enough to understand you cause you talk too fast.

[@eileenbass952]

Tom, it is June 22nd. Where are you, no video yesterday. I hope all is well with you.

[@iaingibbs9589]

Yeah 3rd time is a charm they used to say wasn't it only You and Ollie get together have a good time boys and their toys yeah boys and their toys think about it get into look for add it get into look for a forklift for ya perhaps you can find a decent perhaps you can find a decent one to replace your poor little worn out manner too

[@B4rberblacksheep]

Would I change a range rover for that? Absolutely!

[@nathanbaker4800]

It’s not tested till father gives the thumbs up

[@TomPembertonFarmLife]

😂

[@graemeprendergast9143]

Farmer with the gucci sliders hhaha

[@bobuncle8704]

I guess in this case 2nd times the charm. Sure looks solid. 👍👍

[@PK_Blinder]

The Yaris will never see the back of a recovery truck.... where as the Range Rover....

[@TomPembertonFarmLife]

Correct!!! 😂

[@reagancrockford4573]

When you take a grab reverse a little bit and then lift up because you’re letting oxygen in the face if you just lift up

[@smiler3418]

Defo want the gr yaris

[@philipgraham6980]

Perhaps touch up the cutting edges with a flat file to keep them really nice and sharp, will also require less pressure to cut, but it definatly looks like a good purchase.

[@georgebishop4757]

hands down I would have the gr Yaris

[@francisoshea8748]

Tom, top tip keep the new shear grab edged will work much better...make use of your cordless Milwaukee. Pit looks much better already.

[@mrstiggywinkle]

I got my trailer license 6 months before they changed the rules 🤦‍♀️ oh well good to know i’m legit.

[@mikefoley360]

Harrys farm bought Yaris GR when first out. (Harry's garage channel review) too much money these arable farmers.....

[@TomPembertonFarmLife]

Haha you me not wrong. I like Harry’s farm 😊

[@tony3424]

That’s a better job.. at least this time you had a chance to check it over and try it out..and the manitou handles It ok👍

[@harleypyne75]

We've got one of those grabs Ive found that by keeping constant pressure driving into the face while grabbing makes all the difference, also the voids are where your taking to much silage, so the top of the frame on the head stock side line up the top of the block you want to cut then it should meet up

[@amandabrown618]

Tom you and Olly are like Agri collage students

[@StoneyRidgeFarmer]

Another fun day on the farm....lol...would you trade your Range Rover for it? LOL....man those don't hold up over here in the US ....had myself one a few years back....constant problems! AHHHHH! Be safe out there guys!! Hope to make it over the pond soon!

[@Fieldsonyoutube]

Looks like a proper grab judging by the wall, fingers crossed the next video is not titled "Sheer grab breakes"

[@agrilad3479]

Tom did you see a farm as soon as you got in the air in the plane because I live there

[@johnsephton7436]

Hello Tom on looking closely the tines are not detachable Sorry for the confusion Regards john

[@grenvillephillips6998]

Definitely an improvement and looks robust enough to last - and no leaks!

[@TomPembertonFarmLife]

No leaks!! 😂

[@Michael-8903]

And how will it go for the hydraulic oil salesman? out of business 🤣🤣

[@andywest3260]

I think its your mana too isn’t powerful enough

[@boerauke]

why didnt you go for a Redrock . Mine is 10 years old and has only seen the workshop from a distance!

[@TomPembertonFarmLife]

Love that saying 😂

[@davidgoss4234]

Definitely give it good sharpen on front and side will cut much easier

[@peggycrain532]

Are you related to John Stith Pemberton, the guy who invented CocaCola in the 1800s? He was American. Assuming his heritage is British Isles.

[@TomPembertonFarmLife]

I would to say yes but I don’t think so 😂

[@jameswardle7977]

Looks a good grab👌 if you’ve got a soft disc for the grinder just a quick touch once a week. We’ve a 3 ran with a central blade. 👌 👏🏼👏🏼

[@jameszy88]

Saying “that’s what she said “ to the young lad 🤣🤣🤣

[@twinchop4581]

Sharpening

[@rickratliff1078]

How come you don't use a defacer so the silage is smooth

[@johnspinner5395]

Why not get a defacer and deface your silage pile

[@royjennison3916]

love the Yaris GR , amazing car

[@theabristlebroom4378]

I often don't recognize the music you play (I'm older and don't listen to current music), BUT today I heard a snippet I recognized! Well me father often told me when I was just a lad A sailor's life is very hard, the food is always bad But now I've joined the navy, I'm aboard a man-o-war And now I've found a sailor ain't a sailor any more Don't haul on the rope, don't climb up the mast If you see a sailing ship it might be your last Just get your civvies ready for another run-ashore A sailor ain't a sailor, ain't a sailor anymore

[@rubymcnugget]

I would never trade my landrovers in for a small car loyal land rover lover

[@denisdunphy9046]

Go Olly haha

[@peterclarke3300]

Great video Tom and the grab is not that old plus you know were it came from which makes a big difference it looks like a good one 👏👏👍👍

[@oldretireddude]

Yes, I would trade for the Yaris

[@Asylumescapee11]

would i replace a range rover with a GR yaris? in a heart beat. love how you can see he has been doing that quit a bit in the shed

[@OllyBlogsAgricontractfarmer]

🤣🤣🤣

[@richardirwin9880]

You know what they say Tom, you have to kiss a few frogs 🤣 I would sharpen the blades on it and watch all the turning as a big grab soon scrubs off the front tyres.

[@TomPembertonFarmLife]

😂

[@walterhartwellwhite402]

I see you edited out you trying to screw the connection on the other way round 🙈🙈🤣

[@TomPembertonFarmLife]

😂 was chatting and working. Technically it’s still in there 😂

[@SmokingMan26]

He did a great job getting rid of that Land Rover, they deprecate the second you buy them. Not to mention the stupid high repair bills on them(and you will be repairing it a LOT.)

[@samsfarminglife3244]

Might make a better job if you sharpen the blades

[@jamesfrance1993]

Needs down pressure on the grab before cutting also before lifting out open the grab up a foot then lift out you will get a full cut face rather than it pulling the bottom bit out👍

[@pooley2366]

Third time lucky 👌

[@josephpmans]

Tom, have you considered using a shredder instead of a shear grab? Like the one the 10th Generation Dairy Farmer Uses?

[@TomPembertonFarmLife]

Wouldn’t work on the grass silage I don’t think 🤔

[@gethinjones1348]

Great video Tom, you got the right grab in the end. Maybe the cutting edge needs filing/grinding to be more razor sharp too?

[@Henry-nj4ob]

Will you be at three county’s

[@alantichy3414]

When the first doesn't work bite and bite again. Glad the sheer grab is working Cheers Tom!!

[@robdavies8064]

Alright Tom glad to hear you've finally managed to get a decent sheargrab. What did you do with the old one? I suggest chopping it up like i should have haha

[@plummers9620]

Tom I’m so pleased for you! Albutt grabs are brilliant! You have so much power their with the triple ram. You have the best tines on them too. Keep it greased and keep the side and middle blade sharp and she will work a dream. That’s some tough dry grass you have there too!

[@kirb743]

Don't they have a silage grinder in the UK. Check out 10th Gen video's

[@TomPembertonFarmLife]

Doesn’t work well on grass silage

[@bryansilcox9590]

Since watching your channel I see farming in a totally different way. So technical in many ways Great channel

[@wonderwend1]

Tom, my Husband died last Saturday and it's so nice to get back to watching you and returning to a little normality. Love watching you 💚

[@richardjohnson4096]

New machinery is expensive for a reason, because it’s quality if you work out all your time fixing and picking up second hand ones, fuel picking them up loss of oil, mechanic coming to weld them and new bracket to fix onto manitou, are new ones really that expensive?

[@TomPembertonFarmLife]

Probably x2.5 what I paid for this one at 3 years old 🙈

[@blessedbyond]

Tom please buy a pickup….

[@davidtidy4477]

Stand by your beds!!! Tom

[@leonrichards6583]

just going to look at a jcb and a new trailer 4 ollyblogs

[@michaelhorn5633]

hope your going to paint the bracket and welding, at least with red oxide

[@PeggyStentzCasey]

Was that a dead calf lying on the ground at 17:39?? Look s like you got a good grabber this time!!!

[@joannecollins6487]

It does look like a calf. 😞

[@beakacalek3765]

Friends, what would we do without them. Congratulations on your purchase. Hope you get fare value price for the others.

[@foodforthought4829]

After all the tens of thousands you are getting off U Tube a year you can’t buy a new shear grab?????.makes a bit of content for the channel

[@TomPembertonFarmLife]

@@foodforthought4829 Always a dairy farmer though 😊

[@rogerbond7811]

Like that you get the grease gun out.

[@jeanlafrance8746]

The Yaris is so cool, fantastic car!

[@ippaku]

Have a great weekend be well be you

[@09FLTRMM77]

MM77 Approved 👍🏻👍🏻

[@juliesoane7399]

Loving the contrast between UK and USA. They use a machine that shaves the face of the silage leaving it very smooth. The shaved silage is then picked up with a loader. Still love to watch you all!😊

[@willianvos3521]

It's the same for a mixingwagon

[@thetessellater9163]

That seems so much better, because you can take a thin layer off the whole face for each batch, thus helping to keep the silage 'fresh', I'd imagine.

[@gethinjones7501]

Do bunk shavers work with ryegrass silage tho??

[@outhouse9451]

Wait wait wait. You guys need a liscence to pull a trailer???!

[@TomPembertonFarmLife]

We did yeah 🤦‍♂️

[@Halloumiwaffle85]

I now want a Yaris 😂😂😂

[@ren1half177]

I have heard you mention Psycho a couple times now and I am dying to know more about her. Why that name?!?