lugnut sheared off instead of the stud breaking, so i had to waste an hour of time drilling it out...
Пікірлер: 215
@06goatm67 жыл бұрын
I just got done watching like 20 "stripped lugnut removal" and " how to replace a stud" videos. Kudos to you for doing it the right way. Step one, try an extractor nut. Step 2 if that doesn't work drill out the stud, you've gotta most likely replace it anyways and in the case of this video he did no damage to the wheel with any chisels or torches. BRAVO
@johng52612 жыл бұрын
i got some titanium bits afte 4 hours just barrely got 1/10th the way through. Might need a torch
@WhosthatTeamAFC7 жыл бұрын
Good video. Used a 1/2" cobalt bit to solve my own catastrophe. It was the only method that worked. Mechanics love to put insane torque on lug nuts. Got my tires changed and it took almost 250ftlbs to get the nuts off. No wonder they strip the studs.
@emeraldkind2 күн бұрын
I’m 55 and have been turning lugs since I was 15 and not until today have I had this happen. Crazy!
@davidoomens8497 Жыл бұрын
And I just joined this club. . .I have a 1969 Chrysler 300 and the last lug nut broke off just like yours did. Thank you so much for this great video - insanely helpful!
@MrFasteddie88973 жыл бұрын
YYYYOOOO!!!!!!! THANK YOU SO MUCH FOR THIS VIDEO!!! I'm working on this dodge journey and I have 4 lug nuts did the same thing and I have to finish the car this weekend. Thank you again for this video.
@richardsmith7415 жыл бұрын
Thanks for the vid. Pretty much had it figured out, but had no idea how much time it was going to take.
@robertsimpsonebay6 жыл бұрын
Ive just done 4 in one go from going around a corner with too much weight on the bzck of the lorry ... thumbs up from the uk
@denisstacks68383 ай бұрын
Hade this happen today on my wife’s SUV with expensive after market black rims, I freaked out. I def wasn’t going to put heat to it and thought about a pneumatic chisel but knew that would have def trashed the rim. Found this vid and did just this and got the rim off with out even a scratch. Used colbolt bits small and worked my way up with cutting oil. Drill slow and press hard, ripped right through it. Def appreciate the video 👍👍👍
@Pro1er4 жыл бұрын
Good job. The caps get ruined from the guys at the tire shops running their guns at way higher torque than they should. Anytime you get new tires, when you get home, loosen, then re-torque your lug nuts one at a time to specs, then re-check them 30 days later. If they sit for a long time after being over-torqued, you might have a hard time getting them off later. I read lots of questions asking about the drill bit you used. I don't think hat was a carbide bit, it was a probably a cobalt bit. Regular high-speed steel bits are generally not hard enough to drill through a lug without a pilot hole. Be advised, good quality bits are not cheap, but low-quality bits can be more expensive in the long run, especially if you break one off in the lug. Remember to push the drill bit hard enough to cut the steel, but not so hard that you break the bit. Cutting with too little pressure can actually work-harden the lug. Keep the RPM medium to low and use cutting paste/fluid. If you don't have cutting paste or fluid, use any kind of lubricant to keep the bit cool. Advanced tip: If you can find a wooden dowel, or make one that is exactly the same diameter as the hole your lug nut sits in, drill a hole dead-center in a 2-3 inch dowel the same size as your starter bit. Put the dowel in the lug hole and it will be in the dead-center of the lug. Drill a starter hole in the lug, then remove the dowel and continue drilling.
@alex-mn7rp8 жыл бұрын
same thing happen to me, thanks for the great tip. took about 20 min to remove
@northernferrycustomization5 жыл бұрын
Same problem. 24 bucks got solid chromed lug nuts for all 4 wheels on my wife's Cherokee... only one broken lug nut. Had a tire shop change them out for me because my 300 torque lb. impact wouldn't budge any of them. Not my first time dealing with these stupidly designed chrome covered POSes, but it will be the last on this vehicle. Thanks for the video.
@scottmenefee60666 жыл бұрын
This same thing just happened to me last night thank you for this video I was so lost on what to do!
@xXDannySilvaXx Жыл бұрын
I had this same issue today. I have some Hercules drill bits from harbor freight and a Bauer cordless 20v cordless drill. I tried this method and it worked! Started wit a small drill bit and stepped up from there until i drilled through the threads. Took about 30 mins to an hour. I didnt use a punch, although that would of probably helped centering it. I didnt use any oil, just have to have some sharp bits and dont force it or else you'll break bits inside.
@ktulu279836 жыл бұрын
Having the exact problem with my chrysler. Stuck nut, bolt extractor just shredded it, going to be trying to drill it out tomorrow
@Bubbagonsalves Жыл бұрын
Thank you for giving me the confidence to do this. Working at it now. Not a fun job but we're making progress 😅😂
@kennethgazella26336 жыл бұрын
Thanks for the video. I'm having the same problem with my Chrysler Town and country. What all drill bit sizes did you use
@helenbowie63014 жыл бұрын
Thanks, Pontiac Vibe same lug nuts. It gave us some direction to go to .
@JRCE287 жыл бұрын
been working on this stripped out for almost 3 weeks now. tried the chisel method, a smaller socket and break the stud method and still nothing fucking worked. till now, drilling it out worked PERFECTLY!!!!!!!! thank you for the video bro!!!!!
@TonyFleetwood7 жыл бұрын
JRCE28 fuck yeah! definitely a shitty situation.
@15SAVAGEBOI6 жыл бұрын
What size drill bits are you using ?
@emo69ism6 жыл бұрын
if the bold is damaged dose the wheel hub need to be replaced
@boostedgaragenz25537 жыл бұрын
What drill bits did you use like what type
@trippleslots6 жыл бұрын
Appreciate the time you took to make the video Would have been nice if you had videoed part of the first drill process
@fastfordstang136 жыл бұрын
Well it happened to my f250 but my stud is to long to drill is there any other way to remove it?
@hectorpena51946 жыл бұрын
This just happened to me lol 😂😂 I guess I will follow your instruction😂
@super.rye.22486 жыл бұрын
Just had to do the same to my car. Video helped a lot thanks.
@randabuffer65625 жыл бұрын
Great job man!!! I have to do the same thing today :/
@justin-nf5vl4 жыл бұрын
I was doing the brakes on my 2011 Dodge Journey the front tire lug nuts came off okay but the back ones don't want to come off like they're seized or something
@truesayain8185 жыл бұрын
07 Honda Civic ex MSR rims...help
@robertbrisk93827 жыл бұрын
What bits you have
@kimberlytaylor58869 ай бұрын
Thank you. I just had this happen this afternoon when I was putting my tire back on my 1996 Buick Riviera
@daneagles57223 жыл бұрын
Ok dude u have some funny sayings !!! Thanks for the chuckles !!
@ktan905 жыл бұрын
You're not alone, it happened to me last week! 😅
@FadeToBlackLLC9 ай бұрын
This just happened to me on my Dodge Caravan. Nice video!
@rustbeltpassion85735 жыл бұрын
Dealing with this as well. Wish mine drilled out that easy.
@custardarms85355 ай бұрын
Thanks skip-got the the same issue in a Lexus IS250
@4DIYers7 жыл бұрын
Great video! I've used this in the past, just make sure you use good quality drill bits that are sharp.
@joshjohnston2986 Жыл бұрын
I had same problem on a you guessed it dodge we just melted the stud with torch wheel somehow took no damage
@kevinnkadeslowrideraddicti2165 жыл бұрын
Ima Give this a Shot...Only mine is a B.S keylock that snapped to where I cannot get a socket on it...Wish me luck..
@kevinnkadeslowrideraddicti2165 жыл бұрын
Worked!!..THANK You a Bunch RESPECT from the 509
@handrofilm86195 жыл бұрын
I feel your pain. I have a 2013 Ford Fusion. Nuff said
@MrCollindpyle8 жыл бұрын
I might have to do this tomorrow.. 2009 Dodge Charger... Any tips? Thanks in advance.
@TonyFleetwood8 жыл бұрын
if you have to drill it, get that bit as centered as possible, if you dont have an auto punch like i do, use a manual punch, if you dont make a punch start the bit will walk around and mess it all up, and that will suck.
@brandongonzalez66927 жыл бұрын
Hello. I was wondering what kind of drill bit you used. There's a lot of bits that say they'll drill through metal but I've seen them only drive through weak metals or thin pieces.
@TonyFleetwood7 жыл бұрын
i said right at 1:27, a carbide drill bit. once the hole is started regular metal bits should work if you cut slow
@Partikkus7 жыл бұрын
I prefer cobalt and a good cutting fluid for metal drilling.
@gustavohidalgojr.63438 жыл бұрын
that was funny !!# got the same problem 1hr. ha ill get to it thanks
@pamelawolf3135 жыл бұрын
Thank you for this....my husband is dealing with this right now with his Dodge Ram truck and it stinks.😵🔫
@candicosens81783 жыл бұрын
Ye my husband's too
@jwagner19934 жыл бұрын
9/9/19.. my 2007 Expedition got the same problem. 3 days dealing with
@bert19136 ай бұрын
I always use a torque wrench when tightening lug nuts
@patrikkozar97914 жыл бұрын
I have the same issue with my Jaguar XF. We have been driling for hours now but its still there and its not moving. Cant imagine I would need to replace tyre when something happens far away from everything. Just stupid system!
@LAMPSLIFE3 жыл бұрын
This happened to my car yesterday the guy at the shop broke it in half like yours hopefully this works
@Gershqui6 жыл бұрын
What are the sizes of the drill bits? Thanks.
@TonyFleetwood6 жыл бұрын
the bit sizes are irrelevant. use a small bit to make a pilot hole. then find a bit that fits the inside diameter of the lugnut, or close to it. try to use a size in-between the smallest and largest to make drilling the hole easier.
@tre57production Жыл бұрын
Great video I have to do this for mine thank you
@aaronford71243 жыл бұрын
Great commentary. You can guess why I’m searching this on KZbin. Yup.
@brainpain49454 ай бұрын
Come to Pennsylvania, LOL Every friggin JEEP you work on you'll have this problem with several lug nuts.
@kerryclark19268 жыл бұрын
Great drilling. Almost perfectly center. Good eye. BTW, your car cant be just 1 year old, unless you live in an area where they use salt A Lot on the road. Seems like a lot of rust for a 1 yr old car.
@TonyFleetwood8 жыл бұрын
its a 2001 pt cruiser i bought used, and i owned it for about a year before i had to do the brakes on it, and thats when i found my... issue :(
@1MNUTZ7 жыл бұрын
you could also try a left handed drill bit if you can find one close to the diameter of the stud you punch it drill it in a little bit then hit the reverse on the drill and throttle on and off on and off until it grabs it and releases the lug nut
@TonyFleetwood7 жыл бұрын
i dont see how that would work better...
@1MNUTZ7 жыл бұрын
nvm your threads are fixed on the rotor that's why it's all messed up at the end of the video, other cars for instance a volkswagen uses a bolt rather than just a nut on a fixed stud and it would work better with a bolt because then the bolt would be extractable rather than drilled completely out
@curllymocha35802 жыл бұрын
Did you damage the rotor plate by chance?
@okwui04 Жыл бұрын
Nothing is behind the wheel hub where the studs mounted are
@Mr_brut35 жыл бұрын
Took it to a tire shop and 4 hours later it’s still on there ... I drove off and screw it I will try this tomorrow!!!
@ronnieron11686 жыл бұрын
this will help I got a1999s10,4.3v6,twowheeldrive,chevy
@stephaniagriffith63297 жыл бұрын
happened to me yesterday but dont know how it happened
@slipdip18 жыл бұрын
im on day two of drilling two lugnuts out because some ass clown tripled the torque rating of the lug nuts and the outer layer fucking disintegrated with an impact gun, what drill bits are you using cause ive gone through like three
@TonyFleetwood8 жыл бұрын
+slipdip1 the first bit i used was a tungsten carbide bit, on low speed. the rest were bits i had laying around. the key is to go slow so you dont wear out the cutting tip of the bit.
@daltonbrooks11467 жыл бұрын
holy shit i never thought of this
@APC99062 жыл бұрын
Great video
@rpeek4 жыл бұрын
Thank You.
@WildXNatur9 ай бұрын
So what did it take to replace the stud?
@TonyFleetwood9 ай бұрын
you can knock it out with a heavy hammer and a punch. the new stud you put in and tighten the lug nut to draw it into the hub before you put the wheel back on. you may have to really beat the old stud out.
@demoncroft5 жыл бұрын
Same thing happened to me on 4 lug nuts, one on each rim took me 4 hours to get them all off...FML....no finally getting to change my brakes...😨
@aaronkrause17506 жыл бұрын
dealing with it right now!!! you should see this damn thing
@moneerahmed13342 жыл бұрын
Good idea 👏👏👏👏
@ChiTownTino7 жыл бұрын
must be Chrysler. cuz my jeep just had the same problem
@SinistralArcVI4 жыл бұрын
Mine did tonight
@maxchurchill7034 жыл бұрын
@@SinistralArcVI jeep chrysler yep me too
@joshuareyes37984 жыл бұрын
Me too just delt with this on a heel liberty,drilled one rim still with 2 more rims to loosing, what a nightmare, used extractor bit and worked wonders
@sethgibson94183 жыл бұрын
Same
@pokemon47913 жыл бұрын
They got y'all too huh?
@kohaag82437 жыл бұрын
thank you, my lug nut did the same thing...
@johnnywrench96694 жыл бұрын
Those are 19 mm without the chrome you need to use an 18 6 piont if there is anything left or you have to do what you did if there is nothing to grab.
@stacegod7 жыл бұрын
7 hours and 4 broken bits later and its still in there howd you do it in an hour??
@TonyFleetwood7 жыл бұрын
the first bit is the key, if you drill nice and slow with a carbide bit, you can use the regular kind of drill bits from then on to step up the hole size. if you drill too fast it will burn out the bit and it wont cut well and make the process take longer. plus its a good idea to use some kind of lube when cutting the first hole. i used wd-40 but lots of stuff will work, its just to keep the drill bit cool.
@jimmygalvan69047 жыл бұрын
18 wheeler wheel lug nut rim
@WhosthatTeamAFC7 жыл бұрын
Stace Buzz must be a cobalt bit. HSS bits will not work. Take ur time. Cool the bit down with water or oil periodically.
@Gershqui6 жыл бұрын
Tony Fleetwood what is carbide bit and the size?
@justin-nf5vl4 жыл бұрын
Just happen to me right now on my 2011 Dodge Journey RT
@harolddevers37946 жыл бұрын
I had that happen to me on an aluminum wheel still need to remove it
@1DerfulSniping4 жыл бұрын
i came here for help but im laughing my ass off youre hilarious
@marshalleng19336 жыл бұрын
Best fucking video I've see! I hope everyone that is in my shoes see this video! Going to do this tomorrow! Wore myself out all evening trying to chisel it and air hammer the fuck out of the nut. Fucking up the wheel real hardcore. This looks like it would save the wheel all together. Great commentary too thanks man!!
@carloscordova51545 жыл бұрын
What's up chrysler I'm here for the exact reason
@ringodomingo11238 жыл бұрын
You sound like your a big 1puglife fan .... Great video
@rockyfish31155 жыл бұрын
I have same on my drivers side and sold my welder last year I'm gutted. Need to borrow a welder from someone
@usadaytrader8 жыл бұрын
thanks for the cussing experience
@scottbutterly89972 жыл бұрын
Great thanks 👌
@cris99rr46 жыл бұрын
(One hour to do one) I have to deal with three 😫
@jeremiahabbott52775 жыл бұрын
July 23, 2019 my Jeep is experiencing this same problem and I think I'm losing my mind.
@justinthomas27452 жыл бұрын
Seriously going through this rn I have two of to do
@torrischappell73396 жыл бұрын
sweet I'm doing this on my Jeep somebody stripped my lug all around the rim tried to fix they burned it and hammered it and sheared it down all on rim
@julianh98747 жыл бұрын
Been working on a rusted striped bolt all day tried everything i bent a forway and broke a socket wrench this is my last resort
@supermoistdeluxe7 жыл бұрын
Just happened to me. It's an aluminum to metal corrosion problem.
@itzvexahbackup98263 жыл бұрын
I been doing this for 5hrs and still haven’t got mine off.
@andunpratt3 жыл бұрын
Same
@niocostiono68107 жыл бұрын
had this happen with 3 /of 6 lugs on a dakota.....
@pepperandzip8 жыл бұрын
Good job pain in the ass though those cheap ass lugs they use glade you got it hope I can get mine out
@36ELGALAN7 жыл бұрын
Mine's just broke and it royally sucks
@torrischappell73396 жыл бұрын
power or electric drill
@42svb586 жыл бұрын
do you pneumatic drill? any electric drill in your hardware store can handle this with the right drill bits. also, auto/self center punch is much easier better than a manual and doesn't cost a whole lot more.
@Cody-xo4tb10 ай бұрын
Exactly the same thing I’m dealing with now
@Sandunudara20208 ай бұрын
Me too😢
@ubaldo24v816 жыл бұрын
Same with my Dodge Ram
@rts1597 жыл бұрын
This is happening to my Chrysler 300.... I just wanted to check the brakes ! But I ended up not being able to remove the wheel cause of a stupid lug nut... it shredded off and well Ima try this.. also what do you know it's a Chrysler lol
@TonyFleetwood7 жыл бұрын
RTS good luck and drill slow unless you have a high speed carbide drill bit. high speed will dull the edge and it wont cut as well as a slow twist.
@angelonicassio71314 жыл бұрын
Must be Canadian: “choochin’”. I almost broke through then the bit broke off INSIDE THE BOLT! Fuck me.
@conleyfh4 ай бұрын
Check out that cell phone!! #BlastFromThePast
@psdaengr9116 жыл бұрын
It doesn't matter how long you own a car, how corroded it is. Corrosion is a function of environment plus exposure length. There's no way that those wheels and brakes looked like that with only one year of wear, unless it was a hurricane victim. BTW acorn nuts aren't a problem. Cheap fasteners are.
@noahscott72722 жыл бұрын
Mines only been on for three months and I beg to differ.
@earlreed72796 жыл бұрын
Thanks had five like that
@Primer97 жыл бұрын
is drilling into the stud safe?
@psdaengr9116 жыл бұрын
Sure, so long as you plan on replacing it.
@ccvee72879 ай бұрын
Yep just happened to me
@TravisJansma2 жыл бұрын
Happened to me. Bought some cheap lug nuts on eBay. Went to get tires at Wal-Mart and they can't remove it. Now I can't get tires, ugh
@budakpurba63027 жыл бұрын
it happened to me...
@joey42773 жыл бұрын
Just happened to me it also has to do with the crappy tin lug nut caps