TOOLBOX TOUR | CHRYSLER TECH/APPRENTICE

[@LuaysGarage]

Can we get a “really nice” counter going? 😂

[@ozzmann3217]

Bro said we gotta leave yes sir keeps on with the tour 🤣

[@thejunkyarddrifter]

I was thinking the same thing 😂

[@winchesterp05]

Great set! Love the extreme green. As I’ve gotten older, my sockets have moved higher and higher. Also like how you’ve plucked what you have and have needed from different vendors. Stay out of debt and remember: tool boxes have wheels so you can move em when it is time to move! Well done.

[@Linnn-lw2eo]

Finally a Mopar techs toolbox tour! I’m also a Mopar tech apprentice👍🏼

[@allenramirez2778]

Kudos to you guys, unless it's a Hemi, I can't stand working on Mopar. I think GM is generally the easiest domestic to work on, don't get me started on anything Ford ecoboost. Most foreigns euro or Asian are lacking in the space department

[@williamsanders468]

You can use 27mm and 29mm on the Cummins and ecodiesels. For the Lisle oil filter set. Also they make a little cube with multiple points on it that you can put on your ratchet and it’ll return the piston.

[@MarzNet256]

Nice setup. Smart move going high end on key stuff and eBay/BezoMart for the rest. Imma give it a 10.

[@Redawesomeoby]

Bro got infinite money to be paying 200 dollars more to buy milwaukee off the tool truck instead of HD

[@Petuniaowo]

Lisle makes a tool that you screw into the new Cummins oil filter to pull it out, if you do any work on them it’s worth the $12 they are a pain to get out.

[@Liazon098]

Cool stuff man. I work on lifting jeeps at a boutique for side money. Sure got some ideas for my cart in your video. I like how your top drawer is the most used items. You're going to someday need a heavy duty Pittman arm puller.

[@Sheeeepz]

I clean all my tools after jobs and end of the day, but man, you really keep yours looking new. Love the color combo of the box!

[@LuaysGarage]

Cleanliness and organization is my top priority with my tools. Always get wiped down with the box. Thank you💪🏽

[@Sheeeepz]

@@LuaysGarage Ofcourse! I think also I work in the northern part of the Midwest so a lot rust and really bad condition vehicles, probably another reason my stuff gets so dirty😂😂

[@LuaysGarage]

@@Sheeeepz oh yea 😂😂 just the rust dust alone is annoying

[@allenramirez2778]

I'm in Vegas, water is my only enemy! I had all my stuff out cuz I've been working from my driveway since I lost my shop, it decided to rain fur 5 minutes while I went inside for another tool, it was enough to get all my tools wet. Needless to say, I didn't the next 2 hours with some WD40 and micro fiber towels. I love my tools but not enough to clean them every day, it takes me an hour to roll out my tools and set up every day and an hour to bring everything in, I dint have a garage at my house.

[@allenramirez2778]

You can get those tape cutters for $1, they're seam rippers for sewing, Walmart, I have about 10 all throughout all my tools

[@brando81]

Interesting setup! I have close to the same box. Mines a few years older, so doesn't have the shallow full length drawer. Everyone has there sockets in the top, as do I. I might try them lower like yours, I almost need more wrench space, could put them up top. Nice box and setup 🍻

[@dannysautorepair]

Nice box and tools , I have the green Daytona jack

[@MrWesleyDP]

Nice box, nice video. Where did you get pliers rack....storage thing....in the top of your box? From what I can see yours looks like it might fit my odd needs. Keep it up!

[@LuaysGarage]

I got those from Cornwell. It’s 2 of them. Only thing I don’t like about them is that the slots are different sizes. It goes from small to big and u only get a few for each. That’s why you see big pliers in the middle and then back to smaller pliers. Other than that it’s a great rack. And I appreciate it. Thank you 🤝🏽

[@MrSpartanicus]

Harbor Freight sells the wire ones.

[@MidwestToolReview]

Always buy quality tools first, then buy the nice box…

[@LuaysGarage]

Can’t complain when I’m able to have both 🙏🏽

[@thebackwoodsmechanic5029]

Don't you love it when people ask you a question they know the answer yo but they interrupt you anyway Great setup, rocking some Cornwell

[@giovanimedina6898]

How do you like being with Chrysler, Dodge, jeep, ram in thinking about applying

[@LuaysGarage]

just quit this week. management where i was absolutely sucked. greedy ass people. stole money from me and wouldnt pay me for things that were agreed on. they ended up trespassing me

[@russellpottenger8584]

Nice set up you have. Like you I set myself up with mid lengths from Gear Wrench. Where did you get your three row socket trays from? Thanks in advance.

[@LuaysGarage]

The 3 row trays are from Snap On

[@russellpottenger8584]

@@LuaysGarage I was thinking they might be coming from Snap-On. Hanson is probably making them and Snap-On then Triples the price. 😕

[@devthemechanic]

Got the same box except its grey and red outline

[@ZohoorAlzaba]

well done darling! nice stuff and great setup!

[@spiritualprotector6853]

They make a foam cut out tray for you're pry bar set

[@chryslertechnician3439]

Nice! Just left Chrysler after 7 years

[@blakowitdadraco4809]

where you get the black pliers holder

[@charlieevans3229]

Nice setup but bugged me in the video when you kept calling the battery 4 volts and 5 volt batteries 😂. 12 and 18 V batteries but 4 Amp Hour and 5Amp Hour. But yeah nice set up

[@LuaysGarage]

I know. I realized it after the video went live. That was my fault but I did make some mistakes throughout the video on other things as well. Glad u only noticed that one 🤣

[@ryanrichards9307]

What brand is the plier holder?

[@LuaysGarage]

Got them from Cornwell truck

[@redactedredacted3721]

forgive me for having to ask, i know how you tube comments can go, im a noob and i don't have a hammer drill should i get a hammer drill? can i do many automotive things with it?

[@martinezmartinez3276]

How you like the craftsmen impact sockets

[@LuaysGarage]

No complaints at all. They handle amazing. I have broke 2 torxs bits from craftsman but lifetime warranty lol

[@blakowitdadraco4809]

10:45 deadblow ballpoint

[@tonycroteau9264]

Great video 👍

[@jtsgarage6887]

Not me screaming amp hour not volt

[@LuaysGarage]

Yeah, somebody else said it already and i know I messed up

[@obiitom]

glad i'm not the only one, my OCD was tingling more than Peter Parker's Spider-sense would if Doc Ock tried sticking one of his mechanical fingers where the sun doesn't shine.

[@Codysallander-rq2uj]

I was thinking the same thing

[@carlossandoval2974]

It says apprentice tool box..... I would expect something not that expensive.

[@fixitlinc3339]

snap ring

[@DKLGalactus5]

he has the tools those are not 4 volt battery's or 2 volt batteries, would I let this guys work on my car, no. those are not cornwell Milwaukee drivers, just Milwaukee. I forget what it's called? recommend more schooling.

[@jamil_cars]

Hemi life without a hemi

[@4X4_5OH]

You don’t ever stfu?

[@zeush5.783]

I know man , it’s sad 😞

[@icelover3]

Weird layout

[@LuaysGarage]

Thanks. I’m happy with it

[@icelover3]

@@LuaysGarage That's all that matters

[@AboHashim99]

أقدر أكلمك سناب شات ؟!