How to Fix a Toilet - Complete Repair

[@hmw460]

My plumber wanted 200 dollars to install a new kit for the tank. Excuse me? I may be a 71 years old female with failing comprehension, but I know I can find instructions on KZbin and do it myself. This is an excellent video. I have replaced the toilet parts before, but that was before KZbin and I had to figure it out by myself. This is going to make the job easy. Thanks, ToolDudeTony.

[@pjdebutler5738]

This was a good start. However, my parts had been rusted and gunked together for close to 20 years. On top of that, my strength is somewhat limited. Therefore, the hardest part for me was turning the water valve, removing the bolts and removing the plastic gaskets. For the valve, I dripped some household oil which helped loosen it. I had to pound on the bolts to get off the corrosion. Once that was done, I could put a screwdriver in the crease to hold the bolts steady inside the tank while so I could unscrew them from below. Then I sprayed the bolts with wd-40; a couple of times. Finally, I used a q-tip to add some oil & heated with a hairdryer. This finally allowed me to loosen the bolts and unscrew with a wrench. I had to bang on the plastic gaskets a bit and add some oil to get them loosen also. Once I removed everything, it was easy putting it back together. The final step, adjusting the handle to the right height, took a bit of time but it now works great. I'm working on my second one.

[@micaisawesome]

As a 23 year old female this video made repairing my toilet way easier. I do all the handy work myself so google and youtube are great tools for me to use.

[@browercm]

I appreciate the courtesy flush at the end. Thanks, man!

[@dcpattywacks]

Ok......you inspired me to fix my toilet......I hope I'm laughing & smiling like you when I finish the task! Great video!

[@cholaevolucionada3426]

My husband doesn't have the time but I believe tomorrow I'll be fixing my toilet...thank you for the video

[@mentholized17]

I had reservations about replacing the parts in my toilet. After watching the video, and doing as he said, reading the instructions that came with the repair kit, I was able to fix my toilet in about an hour. Thank you.

[@1aneeshsivan]

Dude, that was awesome!!!!…..answered all of my questions!

[@dfra7520]

I absolutely loved this video! Now I feel confident I can do this on my own. Thank you so much Tool Dude Tony for doing this.

[@Mistersmythe]

Great video joe! My toilet has been broke for three months and in less than four minutes you helped me fix it with no cost to me. Thanks Joe!

[@MrWomey]

This video actually spurred me on to fix 2 toilets that have been broken here for YEARS, because I have fear of screwing them up more, but (after I saw your video today) I did a little more research on the parts I would need to fix each one. I got to the hardware store, saw a bunch of 'separate' parts which confused me more, then I got lucky and noticed a FluidMaster Universal kit for only 9 bucks. I got it home, installed it, and things are looking good ! Thanks too.dude.Tony !

[@Alleline]

Really useful. I just followed the directions and it came out pretty well. I learned two additional things: My flush handle was held on by a reverse-threaded nut, so I had to turn clockwise to loosen. And the tank's internal surface is rough, so I had to use silicone sealant under the washer to stop the water leaking out around the bolt.

[@mnash3]

I agree great video. I have to work on mine tomorrow. the only thing is that I did not know about buying plumbers tape to prevent leaks so I hope that's not going to be an issue on my tank.

[@galteedrohan1978]

Thank you! Removing the tank to replace the insides is a FANTASTIC idea. It makes the job so much easier! Much better to replace it myself, than having someone show up with alcohol breath to fix it. Thanks again Tony!!!

[@kathymeier5140]

Awesome Video, done so even I can even fix my own toilet. Thanks Tool Dude Tony!!

[@darrenmyers5291]

Tool Dude Tony. Many thanks for your video. It was very helpful when replacing parts on my toilet. I'm a visual learner. Just show me "video" and I got it.

[@1FATHEMI]

Gotta love this guy. Ive never done this job before (I've done EVERYTHING Else though) . So seeing it should help. And sine The Walking Dead isn't back on yet - what better way to spend a Sunday Night than changing the guts inside a toilet??

[@R1ch4rd74]

good job. now i can fix it myself rather rely on or pay someone else to do it..u earned a sub and another thumbs up.

[@SMTRowe]

short sweet and to the point! love it thank you

[@xsomeguyx101]

Great video. Thanks for the help!!! Toilet works great now.

[@FunnyClipz1000]

You are so funny. And, you are talented repair man. Love it

[@rrannala]

Great video! Exactly what I needed to get the job done. Thank you!

[@kristihannah5806]

Loved it ,and yes ,that is what I am fixin' to tackle, Hope it is as easy as it looks!!!

[@alyssaguevara5468]

cool that was nice with tool dude tony fixing the toilet by giving me instructions on how to fix the toilet

[@kittysinventiont101]

Thank You So Much For This Easy to Understand Shitter Fixer Video!!!! My husband and I are do-it-yourselfers and we usually tackle our home repairs together. Your great how to video might have saved us a trip to our local divorce court LOL!!! Just joken, but you should feel proud of your great contribution to all do-it-yourselfers who are not the best at successfully fixing plumbing problems!

[@tooldudetony]

@MrWomey --- That is exactly why I do these videos! Thanks for the comment, Mr Womey.

[@randylo11]

Great showing and clearly. Thanks

[@Wildberries13]

Thank you! I was stumped trying to get the bolt off from under the tank (I'm no plumber, and the tools I can use are limited). Never realized I could take the tank OFF. Thanks again!

[@waltwintsch7483]

Thanks for putting this together, it really helps!

[@reneebequick]

Thank you so much! You helped me fix my toilet and it was so easy. :)

[@windblowinginmyface]

Tool Dude Tony you ROCK!!!

[@haleiwahi27]

I like it when you lay out all the tools you need to do the job including the teflon tape and tell your listeners as you go what order to install your parts including any adjustments that might be needed during the job. Also would be nice to know what happens if??? Somehow things don't always go as planned. It would also be nice to hear if different mfg of parts will or won't fit on certain toilet brands, or are all parts universal?

[@MrWill1985]

I had to fix my toilet in May of 2011. It was tricky at first but after a couple of days I got it fixed properly and working. I basically overhauled the inside of the tank however I did not replace the gasket that goes on the outside of the tank under the flush valve and I kept the original bolts except put new gaskets in to the tank bolts since the original gaskets wore out. And I replaced the fill valve with the hydro clean efficient fill valve.

[@parker-sg8tx]

This video was all I needed, also enjoyed the humor. Thanks man. Keep it up! :D

[@RevConwell]

OK, that was the most educational ... and at the same time hilarious ... video I have ever seen. Thanks man, appreciate you sharing this.

[@billeagle51]

Great Video, and the ending was Academy Award material. Kidding aside, I will use this video for mentoring because my toilet is just flushing to dam slow. I have to give it about two flushes before it looks decent (if you know what I mean). So, before I get a new toilet, I will try to replace the toilet tank parts..and I hope I can end the same way as the video..with a smile!

[@KimsUpholstery]

Thanks Tony, My toilet started leaking a couple of nights ago. Thought I would have to call a plumber. You made it look easy. Now I have the confidence and know how to tackel the job myself.

[@robertbailey2557]

That looked easy too do. Thanks Again

[@tooldudetony]

@kittysinventiont101 Thanks for the great feedback. Good luck with your DIY projects.

[@Pensritongkul]

Thanks tool dude Tony!

[@nicholassawyer6023]

I'm glad you used the up to date parts. I often get praised when fixing a toilet because the last guy used a rubber ball.

[@20rockypoint]

you have inspired me to go out and get my shit together and fix it! First time watching you fix shit. Just made my day.

[@moonpiespotlight4759]

I've read no washer in the tank under the bolt head and I've read just the opposite. Supposedly the washer will prevent the rubber gasket from sealing well since the bolt head doesn't put enough local force around the bolt hole because the washer spreads out the downward force and a leak ensues.

[@monsantajoyner5546]

This really helped me... Thanks for the info

[@wb6162]

Nice job Tony! Thanks.

[@tamra5782]

I just fixed my toilet. Thanks for the video!

[@Topspeed325]

Thank you sir. I'm keeping this info.

[@stlbluesfan1992]

In your case, when you install a korky fill valve, you have to set the height before you secure it to the tank if you don't want to have any interference with the flush lever and the float chamber. And your tank was rocking like you only got one nut on or one was loose

[@OscarKesh]

Thanks for the help!

[@maximumxxl504]

Great video ..thanks tony

[@GreenPowerFarm]

thanks for the video! that was funny at the end..."thats what I am talking bout".

[@Nathantrottier]

This is a great video!

[@SunburyPennsylvania]

Now that I turned my water off and on to the toilet, it leaks around the valve. Hmmm...do you have a video fix for that?

[@scott762mm]

Thanks tool dude!!

[@tooldudetony]

Hi Kaleb, Try some Vice Grips. Hopefully, there is enough room for them.

[@kevinblevins4077]

thanks for the video. it was easy

[@Sam-qx7tp]

As soon as I heard how to fix shit 101 I knew this was the guide for me haha cheers dude

[@dthompson2692]

This was awesome! Thank you. You fixed my shitter. Now time to grab a book and enjoy it.

[@celebsputonthespot]

Best how to vid. Thank you and don't forget to spray the bathroom air freshener lol Good job :)

[@christophercarlson6673]

This is my first time doing this, but after watching all your awesome videos; you are the best fix it man! could you please post a msg! I am your biggest fan!!

[@MrWill1985]

I had a leaky toilet myself. And the amount of work was more then I anticipated. I knew it would take time to replace the flush valve. I replaced that. Then noticed the washers that are on the bolts that bolt the tank to the toilet wore. So I replaced them. It stopped leaking from the bolts. Then I flush the toilet and all of a sudden it leaks from under the tank each time I flush. So now I know I need a new Shank washer. And I sure hope that is the last part I need to replace.

[@Wannabe-rockstar-fan]

you forgot to clean it while the tank was off! Lol but good job. I'll be the hero today, thanks dude.

[@suzieestrada3559]

how do you put the handle back on, my daughter broke the big floating ball thing but the chain was already broken. so do i have to remove the whole thing to fix the inside?

[@EJ257IHI]

Great video Tony!

[@mnpaloma]

Thanks ToolDude, I have delaying this project for a while now. With the help of your video, I have built the confidence to deal with this SH#T. You know what the say, "SH#T... or get off the Pot!" Thanks.

[@homeruntoxicologist]

This was helpful! Thanks

[@tooldudetony]

Okay. Good to know. Thank you!

[@Turtletxn]

Thank you for this video. Made my job much easier than the instructions that come with the overhaul kit!

[@TALAfan11]

Thank you Tony!! Really enjoyed the How to Fix Shit video! My dad raised my sister and I to be smart about doing repairs ourselves when we can. This video helps you go back and retrace the steps you've taken and double check behind yourself... Thanks

[@harvardtroy7638]

If you can show how did you use a wrench to remove the nuts that is better.

[@SunburyPennsylvania]

Nice job! I'm going to fix my toilet today! Woo-hoo!

[@johnplink]

I've replaced all the parts in one of my toilets and it leaks. The leak could be coming from where either of the bolts is attached to the tank, from where the flush valve is attached to the tank, from where the fill valve is attached to the tank, from where the tank is attached to the bowl, or from where the water supply is attached to the fill valve. I can see that the leak is not coming from where the water supply is attached to the fill valve. How do I determine where the leak(s) is(are)? Might it be a clue that there is a leak even when the flapper is down? The instructions say to not over-tighten any of the connections, but if they're not tight enough they'll leak. I've tightened the bolts to the tank tight enough that I can see that the gaskets are being squeezed. How can I tell whether I've sufficiently tightened the connections of the fill valve and flush valve to the tank?

[@tooldudetony]

On which fitting? Thanks

[@Madog361428]

Thanks tool dude

[@SecretEmerica]

I REALLY NEES HELP WITH THE 3 SCREWS AT THE BOTTOM . MY WRENCH WILL NOT EVEN GET HALF WAY ON THE BOLT AND ITS ALL THE WAY AT THE TOP ALMOST IMPOSSIBLE TO GRIB WHAT TOOL DO I USE ?

[@tweetnes]

Thank you so much for putting this video up. We got the toilet running again =D It took a little longer to do then it should have LOL but we did it Yeee haaaa

[@tooldudetony]

Hey Christopher, I see your posts. I'm glad you like the videos. I put a message for you on your KZbin channel. Thanks for being a big fan and keep you fingers out of the saw! Ha!. Tool Dude

[@tyakitaboid623]

thank you

[@stephenbard9351]

Tony followed the toilet repair. But having a small leak from the bolt. Suggestions?

[@BATICHICA28]

lolllllllllllllllll,,Que Final!!,, Excelente video,, !!!,,Ahora puedo yo misma poner como nuevo el inodoro..

[@asvpapi]

Teacher, teacher, tell me how you do it! It looked so easy, like there was nothing to it!

[@classicjukebox]

How did he get the water to flow at the end without turning the water valve back on?

[@stlbluesfan1992]

The shutoff was leaking

[@classicjukebox]

STLbluesfan1 I was joking.

[@kathymeier5140]

+classicjukebox He did turn the water on first.

[@classicjukebox]

Kathy Meier I was joking.

[@jasmineford517]

pppoooll?l iklll ooo I'm o

[@teatoxic8563]

I AM GOING TO REPAIR MY TOILET!!!

[@tooldudetony]

Try setting the water level higher. I think it needs more water to complete the cycle.

[@sm03kd]

what if my flush is at the top?

[@steff855]

Thanks bra now im going to fix my shit.. thanks again 💪🏽💪🏽

[@DeniseLayne]

I *was* going to attempt to fix mine... think I'll go ahead and let the landlord do this job!

[@Natalie_828]

Thank you so much, you just saved me. I just messed up my bestf friend's toilet and I'm on my period and the toilet wasn't flushing because the chain wasn't attached. And this great fucking video saved me, thank you so much. I was about to cry and fly out of the country. How embarrassing, thank you.

[@notcool98]

Isn't it difficult to handle the tank? We tried to replace one and it broke very easily.

[@magnoliaguitar]

Muchas Gracias Tony! Thanks to your video I just fixed the toilet in my music studio, saved me a bunch 'o money, and now I know "how to fix shit" just like you!

[@tiffandtony]

Haha this was great. Thanks

[@TheDp1965]

Nicely done. You should rename the video "How to fix your shitter in 5 min". lol.

[@elphie444]

Hahah this video is hilarious! Plus, it looks easy enough...

[@Natalie_828]

Thank you so much. I just messed up my friend's toilet. And I'm on my period and the toilet wouldn't flush. Thank you for this video cause I was about to cry and fly out of the country. thank you.

[@MrWill1985]

I used a wet/dry vac when I fixed my toilet before I took the tank off.

[@panther2552]

give it a shot. parts will run you about 20-40bucks depending on what you want. and if you follow his instructions you'll get it done pretty quick and a whole lot cheaper than the "pros"

[@ellisaarnold2829]

Looks great, but I'll leave this job to the professionals!

[@ravenshadow1969]

Ok my toilet just swirls but doesn't flush. What do I do?

[@Mycooljr]

lol clean it, i mean your working round a toilet for christ sakes hahaha

[@antoniusmas2043]

flushed while sitting.....ewww. good vid