If you use an impact driver you ABSOLUTELY need to try these new Impact Driver Bits. Makita XPS Bits

[@MrHorsepro]

I work every day with impact bits all day long because I repair tools for a living. I use Torx, Allen head and a few flat and Philips as well. The company I work for sells Makita products and we are an authorized service center for Makita as well. Needless to say, I have virtually every brand of bit in my tool chest and I can honestly say that the Makita impact bits are by far the most durable and most have superior functionality. I don’t say this because we sell them, because we also sell and service DeWalt, Milwaukee, and Bosch we service a total of 16 name brands of tools and I have used them all extensively.

[@Johnwickpifpaf]

Do you have wera diamond bits, pb swiss bits, wiha bits?

[@playtothebone]

Just got the bit set yesterday and it bothers me that other companies sell bits that don't fit anywhere close to as well. Feel like I've been ripped off my whole life. That's how good these bits are.

[@flashgordon6238]

That test of the XPS bit and Phillips screw interface holding the drill driver at 3:50 had me sold. Nicely done.

[@saturdayshanks3753]

Yeah I bought these when I picked up my XDT14. They’re awesome. My buddies were blown away when they tried them out so they went and bought some too. Lol

[@mikezador]

I tried Milwaukee, Bosch, Dewalt, Ryobi and Craftsman bits before I see your video. Today I bought Makita 35 bit set. All others going back to store. Thank you for sharing this video!

[@ToolReviewZone]

Awesome, thanks for the feedback Michael!

[@geoffstrickler]

Love my Milwaukee Shockwave bits, but I’m seriously considering getting some of the Makita XPS Phillips bits after seeing your video, and VCG’s. I’ve seen Phillips brand do such a demonstration, but it required their new screws AND their bit for it to work. Makita did it with just the bit design.

[@ToolReviewZone]

I really don't think you will go back bro. These are truly awesome bits👊

[@geoffstrickler]

Tool Review Zone the one where you completely buried the bit was pretty amazing too. I’ve seen overdriven screws before, but I’ve never seen anyone bury a 2” or longer bit. I hope they didn’t make the same mistake as Milwaukee did with the Matrix bits. Hope they learned from Milwaukee’s mistake and aren’t repeating it.

[@AntonioClaudioMichael]

These bits are pretty impressive

[@vinnygoombatts1458]

Wow very impressive. I always just use cheap bits, because I don't want to lose the expensive ones, but I guess I'm gonna get some Makita bits, amazing!

[@JJ-lu6mg]

They look super nice, I’m going to pick some up today. That’s crazy how the drill didn’t fall out off the screw thx bro great review 👍🏼

[@ToolReviewZone]

Let me know how you like them JJ!

[@JJ-lu6mg]

Tool Review Zone I definitely will I just grabbed the kit at the Depo with a few other accessories with it.

[@VCGConstruction]

I know Henry Phillips is looking down on this video and smiling as much as we are, thanks for the shoutout CUZ!! ooooooooooooooohhhhhhhhhhhhhhhhhh!!!

[@ToolReviewZone]

Haha, you got it brother Ohhhhhhhhhhhhhhh

[@harleywood72]

And Peter Robertson is saying " welcome to the club". Kidding aside, these bits look amazing. Hope they're available in Canada.

[@dougwhitt68]

Bought the Phillip's #2, 2" 3 pack today. Best fit I have ever seen in any bit, regardless of price or brand.

[@ToolReviewZone]

Yeah, they are pretty awesome. Thanks for the feedback bro👊

[@JJ-iu5hl]

I'd probably keep some worse fitting bits on me. When I'm tearing out old work and there are a lot of screws, I actually like a worse fitting bit so I can just flick my driver to the side and throw the screw on the floor to sweep up later. Makes demo a little faster.

[@AngelMartinez-me1bf]

Best bits I’ve ever used for them first week they come out

[@ironmantooltime]

More impressive than my wife's bits

[@PerryCaulkins]

I use the shockwaves and they have been better than any other bits. I will try these out though!

[@ccbowers]

Shockwave cases are annoying. Especially for narrow bits and twist drills, you might rip your skin off before the bit releases. I like the Milwaukee bits themselves quite a bit and have a couple sets, but I won't buy them again for that reason. I do like the Makita XPS better overall. Fairly similar design to the Milwaukee, but slightly better finish and much less annoying case

[@squarebodySpringman]

I agree. I got these and love them. best fitting bit ive ever used.

[@GrzegorzKr]

Look what Vince from VCG doing with Ryobi bits. He turned impact driver with Ryobi bit almost upside down. That was amazing.

[@ToolReviewZone]

His name is Vance

[@jettschenker]

Yeah that little novelty trick sure will get a lot of work done... Not

[@KNACKSKILL]

Nice and strong bit, can hold the mother compact driver, nice one!

[@MrRubenrivera9649]

the velocity screws the bits that come with them do the same the drill and impacts hang on the screws as well and r driven faster than any other screws

[@samjones3875]

Not all Phillips screws are exactly the same. Button head sheet metal screws for instance, wouldn’t hold an impact like that. If you only use deck screws or drywall screws these tips look great, but they may not be the best for every application.

[@michaelc7283]

Wow, impressive. I will check them out. Thanks for the video and update on these bits

[@ToolReviewZone]

You got it brother 👊

[@Lone-Wolf87]

I need to go to Home Depot.

[@pjseiber2774]

Hey Thanks I'll have to try these.

[@ckone671]

Makita is top of the line! in my opinion.

[@bluemantom77]

Wow blown away I need to try a set

[@ToolReviewZone]

They are really good bro, just watch out for the Gnome!

[@TheKUZ]

I bought 3 sets of em just bc i liked them so much.. idk how you can really beat these (for the work that I do)

[@tukkus2]

Just ordered a nice set. Thank you

[@mainsource8030]

they redesigned the magnetic ring as well, now it sits toward the end, but you dont always need it, i cleaned out my home depot, this is what the milwaukee matrix carbides should have been

[@josephmalinowski6817]

I use to say that as a teenager please just the tip lol

[@ToolReviewZone]

Hahaha

[@justinmansoer4385]

😂 Made me laugh dude, good times

[@taunokekkonen5733]

Just the tip, and only for a minute!

[@V0YAG3R]

Joseph Malinowski That's what your mom said! 👌🏻

[@josephmalinowski6817]

@@V0YAG3R if you don't answer you are a bitch

[@brendanmartens777]

I'll have to try these to

[@josephmalinowski6817]

All joking aside that is a very nice looking #2 bit

[@daveishywood782]

Ha burning them fingers on the screws . Just to add I never use Phillips screws only on dry walls which do grip ordinary Philips bits . I’ll carry on using my pozi drive thanks 👌🏻👍

[@amoscardoza5253]

Yo TRZ! I'm going to have to give these a run! Great vid! Stay safe brother!!

[@ToolReviewZone]

Thanks brother and you too my dude👊

[@drixom9805]

I do a crapton of tapcon installs bought a set last week i have broken 5 tapcons with these bits. With my milwaukee shockwaves the bits break first.

[@ToolReviewZone]

Wow, cool feedback. Thanks

[@bblwarrantydepartment981]

hope Vince stays safe he is in Hard hit Bergen county NJ!

[@goatsonapost]

Anyone know why the xps bits are hard to find? I’m in Canada and literally no stores carry them.

[@jasonbabila6006]

How about a torque test to see how much torque it could withstand before shattering?

[@ToolReviewZone]

I'm going to see if I can come up with something like that bro. That's why I put that clip from Makita in the vid, but not sure what other bits they used in the testing

[@jasonbabila6006]

💪🏽

[@billlee1724]

When your on lock down but Home Depot is still open because they sell essentials so you go out to get some xps bits to play with #6feetapart 🤣🤣🤣🤣

[@ToolReviewZone]

Haha

[@ADE2366]

Bill how did you know you we’re 6ft apart ?, did you also buy a tape measure 😂👍🏼

[@jimmymac601]

I may have seen you there.

[@brucecarkuff521]

Our home depot has barricaded the parking lot and is only letting 100 people in at a time. Lol!

[@Jihadbearzwithgunz]

I'll have to put these to the test at work we burn through t20 torx at work my work provides us with crescent apex 89mm t20. I already have a 15 pack of the xps t20s plus the 60 piece set

[@XD45OWNER]

I'm sold on the bits for sure, and like you I can't stand the Phillips, I go for the T25 but hell I'll give the phillip's another shot now, pretty good timing too since I been switching my lineup over to Makita and Milwaukee

[@arelectronics4639]

One of my favorite Bits

[@jeffcoolhd]

What's up Makita Man I want to go buy some of those bits right now but I can't till the coronavirus is gone. I was wondering did you get the new magnet with your kit. I always love it when you do videos on Makita tools. Peace brother

[@ToolReviewZone]

Hahaha, I know you do brother

[@hammerheartdan6311]

I might try these! I love my Milwaukee tools, but the shockwave bits are horrendous....

[@danielsimchuk7562]

Lol just bought some yesterday might go return them

[@AntonioClaudioMichael]

Great video Clint Bro

[@ToolReviewZone]

Thanks brother 👊

[@unitwoodworking5403]

thanks for useful tips, awesome and nice~

[@ToolReviewZone]

You are very welcome, and thank for the awesome comments unit👊

[@unitwoodworking5403]

@@ToolReviewZone 👍👍

[@alyusmuse3839]

Well... I AM BOUGHT BY THIS AD!🤯

[@raptordan6851]

They are good bits however I prefer the new Milwaukee shockwave impact duty , they are damn near indestructible.

[@danielsimchuk7562]

Have you tried both

[@bricofast]

For me the best is Wera bits 👍👍👍😁😁😁

[@ToolReviewZone]

Wera is the only other one this would work on

[@jgm3796]

They seem great. Looking for an excuse to go to Home Depot. Quick question: Where are they made?

[@ToolReviewZone]

Probably Japan bro. I'm not 100% sure but most of their stuff is made there

[@Riley_Babe]

@@ToolReviewZone Hope so, cause "Made in China" died for me, actually!

[@Intarsia82]

I bought a 45 pc XPS set today at Home Depot. Can't wait to try them. Made in Taiwan. I have an Excalibur scroll saw made in Taiwan. They make good stuff.

[@Countrysidewonderer]

Why is it sticking to the screw such a good deal wat about wen you want to get it out of multiple screws fast ? Not so handy then. What is important is how long the bit lasts so how strong it is for heavy work.

[@bblwarrantydepartment981]

i am happy these came out cause i got the makita golds for $9 baby yayyuhh

[@ToolReviewZone]

Lol

[@AntonioClaudioMichael]

Need to pick me up some soon

[@ToolReviewZone]

Yeah they are pretty awesome bro

[@kentuckybeardsman]

Best bits out there. Truly are. I have so many of these it isn't funny

[@marvinm.7634]

why is there no pozidrive (PZ) for those? As it is superiour to phillips, i dont understand why makita does not have them in PZ.

[@jesseallen4184]

Cool video. Shame they aren’t available in Australia or even on Amazon.

[@brutus1808]

Can't find these in the UK wanna try them just can't find them at all but we use pz2 here so probly ain't made then yet for the UK buyers so I'll stick with the milwaukee shockwaves for a bit till I can find these

[@ToolReviewZone]

I was literally only able to get my hands on them today. Should be heading your way soon bro

[@GaryGiffin49]

These bits are not at the home depot in western Canada

[@ToolReviewZone]

They should be soon Gary. They just hit the stores here

[@stevennihipali3607]

K, I'm not gonna lie... that's pretty fucking awesome. Any bit that'll hold in place a battery operated...

[@TomSommer]

Now those are cool.

[@Lacoste9277]

I dont think canada has them yet. I just checked the home depot website an nothing in my area.

[@ToolReviewZone]

Should be soon

[@JJR1476]

Awesome.....👌👍

[@MrRubenrivera9649]

have u tried the velocity screws their bit does the same even upside down bro it hangs upside down the drill does

[@richardwagner282]

Are these bits diamond coated for them to be able to stick to the screw heads?

[@jt3d867]

Are the screws Phillips or Posi drive. My experience with Phillips is that the cam out too easily.

[@williamjuchnewich764]

How about hardwood? like IPE?

[@flyfliker]

Makita rules

[@gardenjohn1]

Unbelievable !!

[@joshuaramos9676]

Which impact bits do you think are better and I don’t care about price Makita XPS or Milwaukee Shockwave

[@leotejada4936]

I want it.... Do you know when they Will be in México ?

[@ToolReviewZone]

Probably soon but I don't have a solid date bro

[@username2192]

is it possible to use these bits with Hammer drill also ?

[@zeckham100]

How soft it the wood

[@davidboyle9402]

Why cant you get these in the UK

[@randyhunt1581]

never buying another Makita product after buying their bit holder that absolutely sucked.

[@jesterraj]

whats the brand of the screws?? the T25s

[@TheDoosh79]

No PZ2 bit??

[@1200gs1000]

Can't find them in the UK yet😥

[@pdubs7069]

I snapped 3 doing regular applications, maybe I got a bad batch!! Very disappointed!! Oh & the ones that snapped were the PH2

[@taunokekkonen5733]

The real question is..who still uses Phillips? Torx for teh win.

Seems not yet available in Europe. 😫

[@SuperCano1997]

Haven't had any issues with my shockwave.

[@outhouse9451]

But how bad is the wear on the bit compared to others?

[@andyhuang7526]

How much for this set?

[@RayofallTrades]

The buy here link is not working for me

[@ToolReviewZone]

Thanks for the heads up

[@sandymackenzie2775]

Where can I buy these bits

[@joehall2633]

I tried to do this with my 12volt Milwaukee impact and it didn’t work at all, Didn’t even feel close to holding the drill up. I Must’ve been using the wrong screws.

[@jumper233]

Joe Hall I did it with several different bits,all #2s and 10 different kinds of screws couldn’t get it to stay once. Good bits nonetheless. The gimmicky thing I couldn’t care less

[@ToolReviewZone]

Hmmm, all I did was grab some of my general purpose screws from the box and it worked good. Works best just after you tighten it and let go of the trigger

[@possibility28able]

They're alright. They wear relatively fast and then they cam out quickly. Any chance you can demo the wera diamond coated Phillips bits?

[@anoldocastro4792]

The best

[@karlnorman2427]

OK. Test these on stainless hinges using stainless screws. They'll snap!

[@TheRsixpilot]

The best till you use Hilt bits

[@douglasthompson2740]

I do like my Makita impact driver but their bits have always sucked! So these new ones would have to be a huge improvement to be equal to the DeWalt or Irwin ones. They have always had softer steel which wear out very quickly and aren't that great out of the box while still being one of the more expensive brands. Check out Project Farm he found out pretty much what I have experienced when testing bits. I still wouldn't buy a phillips fastener if given any choice even if the bit could continue as you show. Torks or Robertson are far far superior and hold a driver even when it is a bit worn. I am not even a fan of the 'Japanese phillips' which are very different from the normal ones. They still cam out under load.

[@philiphellier103]

Any screwdriver bit could drive a screw to a bit of softwood.

[@SelfMade464]

That’s what she said

[@billwebster759]

90% longer is not 90 times longer. It means almost twice as long.

[@jcortes3930]

I tested to see if these could hold the ex wife and they worked!

[@ToolReviewZone]

Hahaha

[@amoscardoza5253]

Yo TRZ!!

[@ToolReviewZone]

Famous Amos!!!!! What's up brother 👊

[@kuehnel16]

Like Butta

[@Blue-pr7hu]

These aren’t that great. I went and bought some put them to work the next day and within 10 Seconds the tip broke on me! I’m sticking with my Milwaukee bits...

[@ToolReviewZone]

Wow really. Yeah, if that's the case stay with what works bro

[@p.c.rpendyala9044]

Show demo, on hardwood surface. I challenge, you will fail.

[@wayneo7307]

Very Good , But Milwaukee Shockwave Are Better . These Makitas Should be Magnetic ! Milwaukee Are . Fit is About the Same .

[@konamanstudio2447]

😎🍻🍺

[@paulozabalotnicu1897]

only problem with makita is the battery