Tools For Leather Craft!

  Рет қаралды 50,344

Mascon Leather

Mascon Leather

3 жыл бұрын

The Mascon Magic Mobile Tool Cart - a behind the scenes look at the tool cart I use every day, and all of the leather craft tools I use most often.
------
I'm asked nearly every day, "Can you show me your tool cart?" and "What tool do you use for _____?". I try as best as I can to reply to all comments and questions. However, this was good way to answer everyone at once.
My setup has evolved over many years. And it continues to evolve daily (I made another change yesterday). It's not aesthetically please, by any means. But it's extremely functional and efficient.
I also prefer, when possible, to "use what you have". Like pressure treaded 4x4's and cherry logs for tool racks. I also prefer to modify my tools to fit my needs, rather than me having to adjust to them. I acquire tools to "use", not to "look at". This is also the reason my son started making a lot of the tools I use (as seen in the video). I have specific specs in mind for certain tools. Specs that simply aren't available in the market. So, why not make them yourself?
That's a perfect segway into the "Mascon & ZeeBee Tools". We both had certain demands from the tools we used. The market was not meeting those demands. So we decided to make a difference, and create the tools we wanted. Now they're available to the public, as well!
Thanks for watching, and please consider subscribing, if you haven't already!
:-:-:-:
The Links promised in the video:
The cart!:
amzn.to/3zonMvu
Video - “Bump Jigs - Change Your Leather Crafting Forever!”:
• 11 Simple Tricks That ...
Needle and blade magnets:
amzn.to/3pT6CC1
Bump jigs Aluminum:
zeebeeleather.com/tool-shop/m...
Bump jigs Brass:
zeebeeleather.com/tool-shop/b...
Shop Anvil:
zeebeeleather.com/tool-shop/s...
Super Chunky Brass Bump Jig:
zeebeeleather.com/tool-shop/o...
Pattern weights - Steel:
zeebeeleather.com/tool-shop/1...
Pattern weights - Brass:
zeebeeleather.com/tool-shop/m...
The Entire Tool Shop:
zeebeeleather.com/tool-shop
Mascon Forge Instagram page:
/ mascon_forge
:-:-:-:
Direct links to tools, gear and “stuff”:
Direct to Amazon storefront - www.amazon.com/shop/masconlea...
Or:
Cordless Dremel - amzn.to/2UARMRe
Yellow rulers (my favorite!) - amzn.to/2xlXJtz
Hand clamps (stitching) - amzn.to/2Ufp2hX
Glue Pot - amzn.to/2wdqJD9
Leather Glue (Barge) - amzn.to/37talvb
Leather Glue thinner (Barge) - amzn.to/2UTBrJi
Thread (Ritza Tiger, 1.0 mm) - amzn.to/2SF4i15
Knife - amzn.to/2SNmx4v
Knife (2) - amzn.to/2SwZWui
Stitching Needles (John James) - amzn.to/38nIRZ3
Corner punches (Semi-arc) - amzn.to/3bveP7G
Rivet Nippers (Knipex) - amzn.to/2Siykc1
Hole Punch (Herm Sprenger) - amzn.to/39qYOhh
Mauls (Barry King) - amzn.to/3brqvZf
Pony Clamp (Pony Jorgenson) - amzn.to/37lAGvd
Leather Dye (Feibings) - amzn.to/39sKd4T
Cutting mats (Alvin) - amzn.to/2UVGMjo
Professional scissors - amzn.to/385H0XP
(Disclaimer: Some of the items here are Amazon affiliate links, which means if you purchase an item with the provided links, I get a small commission of the sale, at no added cost to you, which helps to keep this channel up and running. Thanks for the support!)
If you have a question about any tools or supplies not listed here, please leave a comment below and I’ll do my best to direct you accordingly.
:-:-:-:
Follow me:
Instagram:
/ masconleather
Facebook:
/ masconleather
Website:
www.masconleather.com/
:-:-:-:
If you have any questions, please post them directly below in the comments. Yes, I read them all and reply (as long I see them).
Foreign (not English) language comments: KZbin still won’t allow “copy and paste” on comments, therefore, any comments written in any foreign language (not English), if I can’t translate, I may request a translation.
:-:-:-:
For sponsorship information, please contact me directly.
Business inquiries ONLY:
Artimus71@gmail.com
---
Mascon Leather

Пікірлер: 182
@dennisheisey9510
@dennisheisey9510 3 ай бұрын
I appreciate you sharing your shop tips. I used a "el cheapo" roller tool chest I bought at a flea market. That is until today. I just received my rolling tool cart that you recommended. Build starts later today. Amazon should give you a royalty for recommending this cart! Anyway, keep up the good work.
@dmack1827
@dmack1827 3 жыл бұрын
Looks like a perfect size shop. Oh, to have more space. I must start kicking the kids out!
@MasconLeather
@MasconLeather 3 жыл бұрын
😆 kids, out!
@Finke.
@Finke. 3 жыл бұрын
Nothing interests me more than looking at how others set up their workshops ... space saving techniques & innovative methods of improvising & recycling old bits & pieces to form new useful storage of tools/materials/lighting etc etc ... awesome ... I won't mention the hair piece in the window ... mum's the word ... lol ...
@MasconLeather
@MasconLeather 3 жыл бұрын
😆 and thanks for watching!!
@kiwijase1
@kiwijase1 Жыл бұрын
Awesome set up you got there well organised cheers for the tour
@elijenkinson3138
@elijenkinson3138 2 ай бұрын
Thank you for doing this. I have an old Gerber(USA) MP400 multitool, but the metal is too soft to do any real work(I dented the wire cutters by clipping guitar strings). So I challenged it(and myself) for its final task, to create its own sheath to preserve it, using ONLY the multitool. I successfully made one out of an old belt and screw rivets. A bit crude, but effective. Turns out, I had a great time doing it. Now I need a passport wallet to also accomodate an international drivers license. Since I can't find one, I think it would make a great second leather project. Your videos are an awesome resource for info, ideas, techniques, and implementations. Cool style too! Time for me to get some decent tools. Subscribed.
@adambyrd7239
@adambyrd7239 3 жыл бұрын
That thumbnail! My workspace is more like a trailerpark after a tornado.
@MasconLeather
@MasconLeather 3 жыл бұрын
😆
@marcclapton
@marcclapton 3 жыл бұрын
Thank you for the tour of the kart, it definitely is a beast of a setup!!!!
@MasconLeather
@MasconLeather 3 жыл бұрын
Thanks!! And thanks for watching!!
@vycogh
@vycogh 2 жыл бұрын
Awww, such a sweet doggie. More Chloe please and thank you.
@MasconLeather
@MasconLeather 2 жыл бұрын
Awe! Thanks for that ! I need to include her more! I agree ! Thanks for watching! Be sure to subscribe if you haven’t already!
@charleyzavisch2118
@charleyzavisch2118 3 жыл бұрын
Great viedo my favorite so far. You are surely organized!!!!
@MasconLeather
@MasconLeather 3 жыл бұрын
Thank you, sir! And thanks for watching!
@grandcuir
@grandcuir 3 жыл бұрын
No tools cart is complete without a Chloe. I like how you make things work for you
@MasconLeather
@MasconLeather 3 жыл бұрын
Thanks for that!
@steveblair1969
@steveblair1969 3 жыл бұрын
Very cool. The mobile cart is a great plus to your setup. I might be using some of you ideas when I get my shop back up and running
@MasconLeather
@MasconLeather 3 жыл бұрын
Perfect!!
@Stonecraft_Leather
@Stonecraft_Leather 3 жыл бұрын
i totally bought the shop cart. game changer to get all that stuff off my work top and now my desk drawers can be used to store patters. You are awesome.
@MasconLeather
@MasconLeather 3 жыл бұрын
Perfect!!! Handy, huh?!?
@Mr.Petr1969
@Mr.Petr1969 Жыл бұрын
Magical beauty!😊
@MasconLeather
@MasconLeather Жыл бұрын
Thanks !!
@Annalorraine67
@Annalorraine67 2 жыл бұрын
Omg. A too cart. What a great idea er
@Annalorraine67
@Annalorraine67 2 жыл бұрын
Question how meany of one wallets do u make before a photo shoot and add to your sale list? Or do you make a bunch ready for sale? Hopefully i asked this right.
@MasconLeather
@MasconLeather 2 жыл бұрын
Yep! 🤘
@MasconLeather
@MasconLeather 2 жыл бұрын
None. I don’t have a “sale list”. I make one item at a time, and it’s ordered in advance. My current lead time is about 20 month’s out.
@jeffreyjoseph1477
@jeffreyjoseph1477 3 жыл бұрын
Cool video love the set up, Thanks for sharing
@MasconLeather
@MasconLeather 3 жыл бұрын
Thanks!!
@aileen0788
@aileen0788 3 жыл бұрын
Cart goals!
@MasconLeather
@MasconLeather 3 жыл бұрын
It’s amazingly convenient!
@carlosramosjr7266
@carlosramosjr7266 6 ай бұрын
Your the man🎉
@MasconLeather
@MasconLeather 6 ай бұрын
Thanks !!!
@name_change_coming
@name_change_coming 3 жыл бұрын
Mine arrived this weekend. I work out in the kitchen and my tools had taken over the island. It is clear now to use it as a workspace again. I still need a place to store my leather and all the bags of hardware.
@MasconLeather
@MasconLeather 3 жыл бұрын
Perfect!!
@ericspence
@ericspence 3 жыл бұрын
Looks great. I do the same with off-cuts of wood from other projects. Just drill some holes and they hold everything I need them to.
@MasconLeather
@MasconLeather 3 жыл бұрын
Exactly!!
@bjellison905
@bjellison905 2 жыл бұрын
Just getting started I love it but I gotta really learn to start using patterns
@joshuapoche5137
@joshuapoche5137 3 жыл бұрын
Holy geez the turkey baster for thinner. I HATE spilling the thinner, just as much ends up on ground that gets in the glue. Genius idea
@MasconLeather
@MasconLeather 3 жыл бұрын
Yeah. I’ve tried everything!
@krebsco.3584
@krebsco.3584 3 жыл бұрын
Great work as always Artie! I saw on Instagram that you are working on a hand stitching video, which I’m psyched to see. I was wondering if you will ever do a video on edge burnishing? Your edges always look amazing and I’d love to see how you do it. I appreciate all you do brother, thanks! - Ryan
@fordlav
@fordlav 3 жыл бұрын
Fantastic job good Sir. Definitely helpful and yes every video better have a pic of the dog.
@MasconLeather
@MasconLeather 3 жыл бұрын
Thanks for that!!! Chloe thanks you, as well.
@surfearth1
@surfearth1 3 жыл бұрын
I think I like leather crafting tools more than leather crafting! LOL I really like the cart idea. My work bench space is limited and there is never enough room. This is a great solution! Thanks for sharing!
@MasconLeather
@MasconLeather 3 жыл бұрын
Perfect!!!
@teenaidoo8569
@teenaidoo8569 2 жыл бұрын
Thank you. I would love to start soon. Right now I have nothing but a heart n mind full if wishes.. looking forward to learning n getting started. All this is so expensive for me right now, but someday I hope to get started. Thank you for all your information n all the videos great job. God bless 🙌 🙏.
@MasconLeather
@MasconLeather 2 жыл бұрын
Perfect. I’ll be here when you’re ready!
@JessicaCEP
@JessicaCEP 3 жыл бұрын
I hate stuff on my counters, desks and benches…but it’s also my curse…that hammer is nice, it looks like a wizards hat!
@ROBTAT2
@ROBTAT2 2 жыл бұрын
Man you gave me great ideas! I hate the clutter on my work surface too. Definitely gonna get a cart!
@MasconLeather
@MasconLeather 2 жыл бұрын
Perfect!!
@friedhelmschulz3422
@friedhelmschulz3422 2 жыл бұрын
Was für eine Tolle Werkstatt da steht ein Vermögen. Tolle Arbeit die Sie machen sehr inspirierend.
@MasconLeather
@MasconLeather 2 жыл бұрын
English translation?
@tokimfamily06
@tokimfamily06 3 жыл бұрын
wow a lot, i just started 2 weeks ago, i overwhelmed now
@MasconLeather
@MasconLeather 3 жыл бұрын
Baby steps. 🤘
@MurphyinKS
@MurphyinKS 3 жыл бұрын
Good Brother.... I truly appreciate your time and energy to get the information out to YOUR FANS and FELLOW Leather Artisans. I have been playing with leather for a little while and I will soon be one of YOUR TOOL HUNTING LEATHER SNORTING JUNKIES. I like the BUMP JIGS and now that the VA have both hands in splints... I will be HUNTING FOR HAND SAVING ITEMS. PLEASE don't Stop putting GREAT INFO out to us.. AJs CELTIC BEAR.
@MasconLeather
@MasconLeather 3 жыл бұрын
Thank you for that, sir!!
@MurphyinKS
@MurphyinKS 3 жыл бұрын
@@MasconLeather OH YOUNG MAN... My name is AJ... My father was Sir.. Myself I am NOT a Sir... I was Hatched on Sandy Beach in ALASKA. I am a Grumpy Old Toothless ALASKAN MARINE.... I thank you for being polite.. however Call ME ..... AJ, BUTTHEAD, LEATHERNECK, But Not SIR. HAVE A AWESOME DAY and LOVE your family and teach someone a new trick... Thank you AJ
@JohnTBlock
@JohnTBlock 3 жыл бұрын
Cloe makes the vids...every shop needs a foreman!
@MasconLeather
@MasconLeather 3 жыл бұрын
Absolutely!!
@deedle6073
@deedle6073 3 жыл бұрын
wooooo!
@MasconLeather
@MasconLeather 3 жыл бұрын
🤘🤘🤘🤘 enjoy!!
@tjkoker
@tjkoker 3 жыл бұрын
Loved this video. I got any outstanding questions I had with regard to your leather working. tools out of the way. Miss your tutorials. Anything coming down the pipe?
@MasconLeather
@MasconLeather 3 жыл бұрын
Thanks so much!! I have a bunch I want to do next. For sure. One is hand stitching
@robertsteele9941
@robertsteele9941 Жыл бұрын
Hi great set up... Do you cut down a long yellow ruler to make the one that you use in your you tubes? The link takes me to longer ones....I purchased the bump jigs but cant really cannot afford the nice rule you have...thanks
@huntfishtrap
@huntfishtrap Жыл бұрын
Would you consider doing an episode on your stamps, specifically the branding ones and the letters. I have looked around for letters and haven't found what I like and they all seem so cheap. Also concerned with a branding stamp that is poor quality and not sharp (image wise). Thanks for all the great videos. I appreciate all the extra time and character you put into them.
@Porsche964Guy
@Porsche964Guy 3 жыл бұрын
Another great video and thanks for sharing. Now I have a bad case of tool envy…. Would you mind telling me where you get your arc punches? I’ve cut down a couple cheap half-round punches, but would prefer something better. I have check out your son’s site - you should be proud.
@MasconLeather
@MasconLeather 3 жыл бұрын
Thanks!!’ Arc punches are on amazon too. See my tool page on the website for links. Or down in the description
@chusamenendez5911
@chusamenendez5911 3 жыл бұрын
I love your videos and I learn a lot. Where can I get a metal ruler of circles that you have? Thank you.
@MasconLeather
@MasconLeather 3 жыл бұрын
Thanks so much! zeebeeleather.com/tool-shop/mascon-amp-zeebee-nesting-arc-jigs
@johnnylgulledge6899
@johnnylgulledge6899 3 жыл бұрын
Always great to see the Pup! Enjoyed the video and a ? Do you ever use a leather sewing machine? 👍
@MasconLeather
@MasconLeather 3 жыл бұрын
Thanks for watching!!! I have 5 sewing machines. I’ve never used one. 😆
@codydecastro4433
@codydecastro4433 2 жыл бұрын
Hello, I was wondering where you got your work bench with the cutting mat top. I would love to have a bench like that. Also I really like that you keep things simple. Keep it up 👍
@MasconLeather
@MasconLeather 2 жыл бұрын
Thanks!!! See my shop tour video. (2 weeks ago). I made it myself.
@williamedward4044
@williamedward4044 2 жыл бұрын
Hey thanks for the reply on the other question. Here’s another. Where do you get your blades for the Romanov Strap cutter?
@MasconLeather
@MasconLeather 2 жыл бұрын
Any blade works. Weaver, stecksstore, Tandy, etc
@user-cq7sb4mt1d
@user-cq7sb4mt1d 3 ай бұрын
Hey just wondering what kind of glue do you use? I use the standard clear contact cement you buy in the tins at the Home Depot etc but I’ve been having issues with it not sticking well or having a very visible seam between the edges even when I sand because it doesn’t seem to set up right. I think it’s because when I’m doing larger objects like a belt with a backing strip and such that it takes so long to apply that stuff with the little brush that comes with the can to such a large area that I’m not sure if my one half is already too dry to cure right by the time I finish the second half lol that glue pot set up you use with whatever glue you use seems like it would be quicker.
@MasconLeather
@MasconLeather 3 ай бұрын
Barge. See my other videos. I explain it full detail
@AtticusRaevnor
@AtticusRaevnor 3 жыл бұрын
What SPI is your most frequently used chisel set? I'm having a hard time choosing what I should upgrade to, should I stick with 5mm diamonds or 3.85mm slants?
@MasconLeather
@MasconLeather 3 жыл бұрын
I have sets from 3mm to 6mm (3, 4, 5, 5.4, 6). But 5 is my most used.
@surfearth1
@surfearth1 2 жыл бұрын
Where did you get the additional tool shelve/organizers that look like they’re bolted on to the cart?
@MasconLeather
@MasconLeather 2 жыл бұрын
Harbor freight. 😆. Just boot them on.
@joshuapoche5137
@joshuapoche5137 3 жыл бұрын
Ah man how did I miss this video. I asked for a cart vid a while back. Thank you so much. I'm in the process of getting my new leather shop together and not liking my too setup right now. Got some great ideas
@MasconLeather
@MasconLeather 3 жыл бұрын
Perfect!! 😉
@eross21
@eross21 Жыл бұрын
what color thread on top do you use the most. the toast color , or the more yellow color?
@MasconLeather
@MasconLeather Жыл бұрын
Cream and Havana
@wheelman3856
@wheelman3856 2 жыл бұрын
man, you doing great job ))) want to ask for wallets , what number beveler using most, what thickness leather, what number thread and needles ? thanks.
@MasconLeather
@MasconLeather 2 жыл бұрын
Thanks!! I explain all of that in the hand stitching video. 👍
@Stevos-Corner
@Stevos-Corner 3 жыл бұрын
Artie the skiving knife you use. Where can I get one of those? That bent handle would make skiving so much easier for me. If its a custom made one can I order one?
@MasconLeather
@MasconLeather 3 жыл бұрын
Yes, I had it custom made by ibex ironworks. It’s a regular request for him now. 😆
@rpdd1
@rpdd1 Жыл бұрын
What size scalpel and blades do you use ? Thanks again for your videos and taking the time to explain in detail. You are a great teacher of the craft.
@MasconLeather
@MasconLeather Жыл бұрын
Oh …. I can’t recall blade size. There are so many. #4?
@rpdd1
@rpdd1 Жыл бұрын
Ok, thanks
@steweydewey2793
@steweydewey2793 Жыл бұрын
which Barry King edge beveler sizes do you use the most?
@MasconLeather
@MasconLeather Жыл бұрын
I explain all 5 and the 2 I use and for what, in the hand stitching video. 🤘
@LizDavis2009
@LizDavis2009 3 жыл бұрын
Great video! Thanks for the tour and the ideas!! One question I have though, what size is your work table and where did you find it?
@MasconLeather
@MasconLeather 3 жыл бұрын
Thanks!!! I made the table. It’s 8’ x 4’. The cutting mat is from Alvin. I show it and explain it more in my last video. “Could it be this easy?” Video.
@LizDavis2009
@LizDavis2009 3 жыл бұрын
@@MasconLeather thank you!! Good to know!! I’ll check out your other video!!
@MasconLeather
@MasconLeather 3 жыл бұрын
🤘🤘
@christophergreen2130
@christophergreen2130 2 жыл бұрын
What size stitching needles do you use?
@MasconLeather
@MasconLeather 2 жыл бұрын
002
@AlexanderMason1
@AlexanderMason1 2 жыл бұрын
How often do you change the sanding bit on your Dremel tools.
@MasconLeather
@MasconLeather 2 жыл бұрын
Lol. Not often enough. I clean them daily with the eraser block
@briantravers1693
@briantravers1693 2 жыл бұрын
What equipment do you use to record your videos: camera(s), gear, lighting, software,, etc,,, thank you !
@MasconLeather
@MasconLeather 2 жыл бұрын
That’s a loooong story. Camera, iPhone. Camera app, filmic pro. iPad mirror software, filmic pro remote. Video software, LumaFusion for iPad. Etc etc
@stevendgrissom1968
@stevendgrissom1968 2 жыл бұрын
Who do you suggest to have custom logo stamp made from?
@MasconLeather
@MasconLeather 2 жыл бұрын
I like hex n hit. They’re great. I prefer brass
@tomymoonly
@tomymoonly 2 жыл бұрын
GReat job on all your videos so much work put into them. I got a question about this one, what brand of chisel do you use or do you recommend whateva the price range is? Ty regards.
@MasconLeather
@MasconLeather 2 жыл бұрын
Kevin lee chisels. For 15+ teeth. My others are amazon. I link them in a lot of my video descriptions
@tomymoonly
@tomymoonly 2 жыл бұрын
@@MasconLeather Ty for taking time answering me. Keep going you re one of the most pedagogic and ludic content over your work here.
@MasconLeather
@MasconLeather 2 жыл бұрын
I had to google some of that. 😆 Thanks!!!
@tomymoonly
@tomymoonly 2 жыл бұрын
@@MasconLeather Sorry :S, Another question that might have been covered in another video (but i can't find it) why are you going with diamond chisel (i believe) instead of french chisels? Simple preference taste? i ain't no pro but very interested in cultivate myself into this job. Ty
@MasconLeather
@MasconLeather 2 жыл бұрын
@@tomymoonly 15 teeth I go to Kevin Lee. 1 - 10 teeth, amazon. I put links down in my video descriptions
@williamedward4044
@williamedward4044 2 жыл бұрын
Where do you get your scalpels and replacement blades. By the way bump jigs are the best investment I’ve ever made!
@MasconLeather
@MasconLeather 2 жыл бұрын
For regular medical scalpels, eBay is the best. Thanks for the support!!
@diablo_4x4
@diablo_4x4 3 жыл бұрын
Hey mate, had a look through all your links but didn't come across that beautiful compass you have! Mind sharing where you got it? Cheers!
@MasconLeather
@MasconLeather 3 жыл бұрын
amzn.to/35XNREo
@diablo_4x4
@diablo_4x4 3 жыл бұрын
@@MasconLeather Legend! Thanks for replying so quickly! Your videos are super helpful and entertaining. Hope you're doing well.
@MasconLeather
@MasconLeather 3 жыл бұрын
Thanks!!
@Brodius_Maximus
@Brodius_Maximus 3 жыл бұрын
Where do you get your flat leather pliers?
@MasconLeather
@MasconLeather 3 жыл бұрын
Amy roke
@viktor8927
@viktor8927 3 жыл бұрын
7:58 Blades and needles are everywhere. I heard the voice of a small child - it's time to change habits and hide sharp things.
@MasconLeather
@MasconLeather 3 жыл бұрын
😆
@joeparker1239
@joeparker1239 3 ай бұрын
What’s the height of your work table and why that height?
@MasconLeather
@MasconLeather 2 ай бұрын
I don’t recall. It’s just “comfortable”
@pipewrenchlynch937
@pipewrenchlynch937 2 жыл бұрын
I would like to get one of those Spike hammers .. wonder if B King could make one ?
@MasconLeather
@MasconLeather 2 жыл бұрын
My son makes them. @mascon_forge.
@pipewrenchlynch937
@pipewrenchlynch937 2 жыл бұрын
Thanks I will get in touch . Thanks for your videos .
@MasconLeather
@MasconLeather 2 жыл бұрын
Thanks for watching!!
@juliusortaleza1486
@juliusortaleza1486 2 жыл бұрын
Wow expensive tools I wish I have to. To start my business.
@MasconLeather
@MasconLeather 2 жыл бұрын
👍
@dmcguire1442
@dmcguire1442 3 жыл бұрын
I use a very similar setup...& also find clutter to make me feel unpleasant. If you can't beat em then join em. "BUY THE TICKET...TAKE THE RIDE" HST 💎#D-VICE LEATHERCRAFT
@adammoseley3796
@adammoseley3796 3 жыл бұрын
Where do you get your stitching chisels? I can't find one with any more than 10 teeth on it.
@Darkeklaw
@Darkeklaw 3 жыл бұрын
I think the big one he has was custom made for him.
@MasconLeather
@MasconLeather 3 жыл бұрын
Yea. Kevin lee made the 15 teeth
@lorenleong2519
@lorenleong2519 2 жыл бұрын
What model of cordless dremel are you using? The link goes to a corded model. Thanks really enjoy your videos.
@MasconLeather
@MasconLeather 2 жыл бұрын
This one: amzn.to/3zkJiSH
@lorenleong2519
@lorenleong2519 2 жыл бұрын
Thanks, keep those videos coming.
@MasconLeather
@MasconLeather 2 жыл бұрын
Thanks!!!
@Tecnotroglodyte
@Tecnotroglodyte 2 жыл бұрын
What are the shorter (non-ritza tiger thread) looking spools?
@MasconLeather
@MasconLeather 2 жыл бұрын
Tiger thread also. Some sell in short lengths. I’ve had those forever
@Tecnotroglodyte
@Tecnotroglodyte 2 жыл бұрын
@@MasconLeather I've found 25 and 50 meter on Amazon, other than that I seem to only find the 500 meter full spool. Do you have a shop that sells more options for length? Thanks in advance!😬
@MasconLeather
@MasconLeather 2 жыл бұрын
Rocky Mountain leather
@2rueblue
@2rueblue 10 ай бұрын
I did think you were going to say you used the other use for the turkey Baster was artificial insemination when you whipped that bad boy out. 17:00 I do hope you see this as you are an old fart like me, at first when I saw your shows I thought he must be a younger dude with your choice of booze and your general attitude. Then I fell over an interview you had done at some point explaining how you got started in Leathercraft. I was so surprised to see this old fart in a pair of sheepskin slippers making these amazing leather wallets. Brother, it made me so happy and strengthened my resolve to get my finger out of my arse and get making. Hopefully, before I'm too old keep it up, I'm talking about the rivet setter here, well hopefully I could manage to attain a fraction of your skills and make something I would be proud to put my name on. If I can't I'm just going to buy your work and change the maker's name, bugger, I would still need to be able to keep the tool up, I mean the stamping tool and I hope I will still be able to swing a maul. All the very best from Scotland and I would never plagiarise your work. I'm still trying to find you somewhere I can have a proper conversation with you as not only am I a fan of your work and that includes the editing and camera work you do, we are about the same age I think and you gravitated towards leatherwork and I'm about to but both of us for similar reasons, I would like to thank you for showing it can be done, I doubt I will get anywhere near your skill level but I need to try. Again all the very best from Scotland.
@MasconLeather
@MasconLeather 10 ай бұрын
👍👍
@MistressJakki
@MistressJakki 3 жыл бұрын
The one with time most tool…Wins
@MasconLeather
@MasconLeather 3 жыл бұрын
😆
@erikiacopelli451
@erikiacopelli451 11 ай бұрын
Got scalpel with 100 blades for 6 bucks on ebay
@MasconLeather
@MasconLeather 11 ай бұрын
Me too. To lazy to switch blades
@bamarol311
@bamarol311 2 жыл бұрын
What are the two most common edge bevelers do you use?
@MasconLeather
@MasconLeather 2 жыл бұрын
01 & 1
@MasconLeather
@MasconLeather 2 жыл бұрын
I explain them all and why on my hand stitching video.
@bamarol311
@bamarol311 2 жыл бұрын
@@MasconLeather Thank you so much! I watched that one and I guess I didnt catch that part. or maybe I was on the wrong video entirely. Thanks for your response and I really love the work you do!
@MasconLeather
@MasconLeather 2 жыл бұрын
👍👍
@meon8013
@meon8013 3 жыл бұрын
6:01 what is the name of the green object
@MasconLeather
@MasconLeather 2 жыл бұрын
Japanese cutting mat
@meon8013
@meon8013 2 жыл бұрын
@@MasconLeather thank you sir ^^ i like the way you craft a wallet. simple smart
@vanburke4971
@vanburke4971 2 жыл бұрын
Can you explain the tool that appears to be made of an antler?
@MasconLeather
@MasconLeather 2 жыл бұрын
Absolutely!!! It’s actually a deer bone. My son makes them for me. It’s essentially a “bone folder”. Book makers use bone folders in their craft. The good ones are made of actual bone. The fakes are made of plastic. For me, it holds leather down as I pull chisels out. Also, to crease and mold leather around corners, etc. tons of uses.
@vanburke4971
@vanburke4971 2 жыл бұрын
@@MasconLeather thanks for the quick response and good info. I just moved to Newport news and me and my family have fell in love with Colonial Williamsburg aswell
@MasconLeather
@MasconLeather 2 жыл бұрын
Oh yeah!!! See my other video, the story behind the brand. Shows me in colonial Williamsburg itself (running???)
@vanburke4971
@vanburke4971 2 жыл бұрын
@@MasconLeather just watched it(along with most of your videos lol) yesterday!
@MasconLeather
@MasconLeather 2 жыл бұрын
Thanks for watching!!! Be sure to subscribe if you haven’t already!
@dalenielsen7054
@dalenielsen7054 3 жыл бұрын
Son-of-a-bitch, a cart! Why didn’t I think of that, I’ll be 72 in three weeks and this vid changed the way I store my tools. I’ve been using the hanging on the wall (easy to spot, but you have to get up to pick them off the wall), l also use the wooden blocks that clutter up my bench deal. That “old dog new tricks” BS is just that. I can’t thank you enough, probably going to need two carts because I have to much stuff, don’t tell the little women. Mochas Gracias from Old Mexico!
@MasconLeather
@MasconLeather 3 жыл бұрын
Perfect!!! I now have two carts. 😆
@elidblfap2818
@elidblfap2818 3 жыл бұрын
Was the baby made by Mascon Forge 😝
@MasconLeather
@MasconLeather 3 жыл бұрын
Mascon turnings. 😉
@leonwastwick9124
@leonwastwick9124 2 жыл бұрын
what were the squirrels doing?
@MasconLeather
@MasconLeather 2 жыл бұрын
Running?
@Sandeep-vr8ri
@Sandeep-vr8ri 3 жыл бұрын
Wow,, how much money did you invest till now on tools?
@MasconLeather
@MasconLeather 3 жыл бұрын
I’ve bought nearly every tool 4 to 10 times. Always searching for the best for me. If I had to guess …. $100,000?
@Sandeep-vr8ri
@Sandeep-vr8ri 3 жыл бұрын
@@MasconLeather 😲😲😲😲. That's a hugeeee amount. Love from india 🇮🇳
@Sandeep-vr8ri
@Sandeep-vr8ri 3 жыл бұрын
Actually I am a programmer and your vids are so relaxing for me to chill . Eat ,sleep ,Mascon leather , code repeat. ☕ cheers
@MasconLeather
@MasconLeather 3 жыл бұрын
I love it !!
@robertmcdaniel5199
@robertmcdaniel5199 3 жыл бұрын
I to want to no where he get his stitching Chisel the big one's
@MasconLeather
@MasconLeather 3 жыл бұрын
Kevin lee
@robertmcdaniel5199
@robertmcdaniel5199 3 жыл бұрын
Thanks
@MasconLeather
@MasconLeather 3 жыл бұрын
👍
@dreamwarriors979
@dreamwarriors979 3 жыл бұрын
Same really AWESOME tools Why using plastic pipes & not real nice wood what u can find 4 free everywhere outside?
@MasconLeather
@MasconLeather 3 жыл бұрын
The pipes are metal. Cut from the poles I used to make my wall leather racks. = free
@sayirugur8715
@sayirugur8715 Жыл бұрын
çok aletin var.
EASY & QUICK?! - I'll Show You Why! (All Tools Explained!)
22:29
Mascon Leather
Рет қаралды 177 М.
YOUR Leather Craft Questions, Answered!
25:12
Mascon Leather
Рет қаралды 41 М.
Secret Experiment Toothpaste Pt.4 😱 #shorts
00:35
Mr DegrEE
Рет қаралды 35 МЛН
IQ Level: 10000
00:10
Younes Zarou
Рет қаралды 10 МЛН
39kgのガリガリが踊る絵文字ダンス/39kg boney emoji dance#dance #ダンス #にんげんっていいな
00:16
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
We Tried Leather Bump Jigs So You Don't Have To
17:09
Corter Leather
Рет қаралды 54 М.
9 Budget LEATHER CRAFT TOOLS - [for beginners] - Basic Tool Set
10:02
You can Hand Stitch Leather (Easily)!
28:21
Mascon Leather
Рет қаралды 249 М.
How to make a Japanese leather skiving knife with common tools
10:18
Getting Started with Leather Craft - Basic Tools
10:10
CHARTERMADE
Рет қаралды 207 М.
The Easy Way! - Making the Mighty MacBeth Wallet!
24:47
Mascon Leather
Рет қаралды 47 М.
Опасный Лимонный Сок! 🤯
0:25
ШОК
Рет қаралды 2 МЛН
Мужик купил китайское авто и сразу поехал в СЕРВИС
0:14
Собиратель новостей
Рет қаралды 3,4 МЛН
Доброта этой девочки.. #shorts
0:31
Only Shorts
Рет қаралды 3,5 МЛН
A woman comes a plan to teach her indifferent husband a lesson #shorts
0:44
Fabiosa Best Lifehacks
Рет қаралды 3,8 МЛН