HST!...Need I Say More?...NEW Federal Premium HST .357 Magnum Self-Defense AMMO Test!

Checking out the new .357 Magnum HST ammo from Federal. Is this simply the BEST? Heavy clothing ballistic gel test using a Taurus 605 and Ruger GP100!
Join this channel to become a member of The Range Gang:
/ @toolsandtargets
I am not promoting, nor do I have any affiliation with, any of the retailers or manufacturers shown in this video unless specifically stated otherwise.
All shooting is performed on a private, closed range on private property under controlled situations. Do not attempt any activities shown in the videos on this channel
No firearms or ammunition are offered for sale in this video or video description. There are no links provided to sites where firearms or ammunition are available for sale.
Good Stuff! campsite.bio/t...
Amazon Affiliate Storefront: www.amazon.com...
* 35- 50% OFF Axil Affiliate Links!*
GS Extreme Earbuds bit.ly/3VfRMUH
15% Off Code For Everything Else On Their Site: TOOLSTARGETS

[@Mbartel500]

The HST keeps setting the standard in all of the calibers that it comes in. This is a great addition to their lineup.

[@ToolsandTargets]

Yes it is.😎👍

[@RealtyPro7]

Let’s just hope they listen to the emails we send and get the 200 grain 10mm moving 100-150 fps faster from a 4-4.5” barrel. 200gr at 1250fps minimum is ideal. Then they would be the king of 10mm “JHP” without question. It would be real 10 energy with IMO perfect penetration and expansion with great barrier performance. Same with 380. Just need to see better terminal performance, again IMO. I’d like to see a minimum of 16” in gel through clothing with their expected expansion and disruption. For now I can’t see using any 380 EDC ammo other than UW XD or XP. I believe the HST can be made to do better in those two calibers “if” Federal decides to make it happen.

[@ESMaddock]

Their 38 special was so bad, they discontinued it. Every other HST is a solid performer.

[@user-dm4yx3iz5f]

​@@RealtyPro7I'm still going to get a box of hst for my Glock 20 but for now I have winchester defender elite 180 grain

[@RealtyPro7]

@@user-dm4yx3iz5f I did too. HST does perform extremely well in the tests! Have several boxes and filled mags. Same with the UW XD. And more with the UW coated hardcast. But for some reason I seem to keep carrying the UW 200 grain XTP. Force of habit I suppose. Lol. That tends to ride onboard the G20 or G29 with Xtreme Defender in the main backup pocket mag. How do you like your G20? I recently finally changed from a heavily used Gen 3 to a new 4. As predicted, as soon as I had it set up the way I like, the Gen 5 hit the shelves! But it’s my main and most trusted EDC. Never had to use this new one in self defense, only forced to draw it once. Never had to use it on a critter either, but I’m confident it will work 100% just like the Gen 3. I’ve never had any Glock that failed to function perfectly out of the box and also after being beaten up for years.

[@Ifoughtpiranhas]

The great thing about a .357 Magnum revolver is that the versatility is insane. A good service size revolver in .357 Mag is a great investment.

[@ToolsandTargets]

Agreed

[@rsbreth]

If I had only 1 handgun - 4" barrel .357. Super versatile.

[@strat1080]

Im fond of the 3” K frame 357. Perfect. A little more versatile than a 4”. A little easier to carry than a 4” definitely easier to be proficient with than a 2”.

[@leahbennett4979]

Now if federal will just make a .44 special HST!

[@RL-RL]

THAT was a great test! Even from the shorty it worked great! The funny thing is that out of both length barrels, the HST performed better than 80% of the 10mm tests we've seen lately. 🤣

[@ToolsandTargets]

😂😂😂

[@aboutmyfathersbusiness6907]

​@@SuperD00D 9mm nowhere near 10mm 9mm guys love to keep lying tying to move up the scale what's next......it hits harder than a 12gauge slug???

[@dariodicarlo8745]

Only underwood and buffalo bore make a lot of good 10mm

[@RL-RL]

@@dariodicarlo8745 You left out Grizzly. The tests prove that Grizzly is in the top three.

[@lanemerrill]

Underwood 155 goes 1500 from g29 with aftermarket 4.5" only load I've seen that actually makes 10mm beat the 357

[@Mgarcia3160]

I have a Henry 357 with 20" barrel. Like to see how they preform with the long barrels.

[@ToolsandTargets]

Definitely on the list.😎👍

[@houseofpain3580]

SP-101 w 115gr SilverTip @1400+fps

[@yuvgotubekidding]

@@houseofpain3580 What barrel length?

[@TexasLonghornRanch]

357 out of a lever action is a completely different animal. Devastating.

[@houseofpain3580]

@@yuvgotubekidding 3/16th barrel w14gr Bullseye. SilverTip rulz

[@traumajock]

Maybe if we say our prayers and be good little gun enthusiasts, Federal will bless us with .38 Special HST again.

[@mr_m_5000]

Great test. HST is consistently amazing regardless of caliber.

[@kevinramsey4673]

I agree 💯

[@ToolsandTargets]

Great stuff.😎👍

[@davidbliss3220]

Just bought a couple of boxes. I was bummed out when they stopped making hydra shocks,but I’m glad have totally redeemed themselves with the HST

[@ToolsandTargets]

Another winner for sure.😎👊

[@SwampOperator]

Hst is everything the hydrashok was supposed to be and and everything it ever wanted to be

[@davidbliss3220]

@@SwampOperator I agree I’m so glad they decided to include revolver cartridges to the HST line

[@poisonPpaully]

This got me excited I’m a big fan of both 357 and hst projectiles because hst never disappoints and 357 is truly a mans round I’d be interested to see the in a lever gun now

[@ToolsandTargets]

Definitely gotta do that.😎👊

[@steverussell6642]

​@@ToolsandTargetsnice 👍 can't wait for that need to get me some of this stuff

[@FMDad-dm5qo]

Hot .357 Mag from a lever carbine can get right up close to .300 BLK supers in ballistics; very versatile light rifles with good handling and an innocuous appearance

[@waynefelton6413]

EVERYONE sure appreciates your videos Tools no matter if you're ammo searching or doing the 'jelly' time. They are always informative, so again, 'Thank You' for all your down home sharing with us.

[@ToolsandTargets]

Really appreciate that!😎👊

[@barrydraper]

HST has always been my favorite and in .357 it doesn't disappoint. I daily carry the 147 gr in 9mm. Might have to get some for my little 605 as well. HST does also make a 38 spl +P round that also performs exceptionally in the 2" barrel snub nose, with a bit less kick.

[@ittbelitt8409]

Can’t find that 38 special hst

[@Brad1237202]

Thanks Brother for taking the time to make this video for us! Looking forward to future ammo and primer availability videos at your local stores.

[@ToolsandTargets]

Appreciate that!😎👊

[@1diggers1]

@@ToolsandTargets Great video! Interesting the HST expanded more AND penetrated more than the Underwood ammo, yet the HST had less energy. Ya never know!

[@tlc239]

Thanks!

[@ToolsandTargets]

Thank you sir. Really appreciate that!😎👊

[@brianbon831]

That bug got his world rocked at 6:30 😂

[@ToolsandTargets]

I almost did a close up on him during editing.😂😂😂

[@adamsaylor7427]

Another awesome video! Thanks! You know there’s a crowd that wants to see 3”

[@ToolsandTargets]

Got something in mind just for that.😎👍

[@ElainesDomain]

The wife has a Smith Model 19 K frame 2 1/2'' barrel in her dresser. 158gr. She said that she doesn't like bad guys and if she misses the good spot and hits his shoulder that she wants his arm to fall off. Thanks Tool Guy. It's videos like this that we have good ammo.

[@ToolsandTargets]

🤣🤣🤣 Love it! 😎👊

[@Texas2Step79]

HST is one of the few if not only .357 sig rounds that arent watered down... I get 1450 from a 4 inch barrel.

[@ToolsandTargets]

Nice 😎👊

[@EC-mc7vg]

WOW!!! 1,115 fps with a 154 grain bullet from a 2" revolver AND it had great penetration, expansion and weight retention. That is impressive, gives the short barrel revolver carrier some confidence and reassurance. Good test Tools, thank you.

[@ToolsandTargets]

Definitely some great stuff.😎👊

[@LuckyDog350X]

I was waiting for this test for a while, I knew you would eventually find a box. These HST's really are impressive, I mean for there to be a 200 fps difference between the 2" and the 4" and 170 ft. lb. difference and the 2" had basically the same penetration as the 4" that says something. Thank You Sir and have a good one brother see you on the next one.

[@ToolsandTargets]

They got it figured out.😎👊

[@mateoocampo3165]

Could you get an 18" carbine in .357 to add to the .357 testing? Some people like a combo of .357 revolver and carbine. And they prefer to stock just one load. I don't do that, I'm a .40glock/5.56mmAR guy. But I believe all different lifestyles should be represented.......

[@jeffreyrobertson7652]

Great test Tools I carry the 124 grain Federal HST 9 mm every day one Great Round Stay Safe Stay 2A Strong 🇺🇸

[@Nutty.357]

Very nice! Impressed with the snubby performance! Like those grips on the 605! You know it just gets better in 6" or a lever! 💥

[@ToolsandTargets]

Yessir. These grips do a great job of soaking up recoil.

[@Nutty.357]

That's what Im talkin bout!! :D @@SuperD00D

[@billdye3530]

Thats about as good as you can get out of a 2inch or 4in barrel. But that extra 169fpe sure smacked the gel out of the 4in. Need to get some for my 627 asap before it disappears. Appreciate the good info.

[@ToolsandTargets]

Yessir. Hit with authority.😎👊

[@billdye3530]

​@@ToolsandTargetsNo running from Yogi 🐻 with a cylinderful or lever rifle full of this. Yogi better hibernate. 🐻 🛌 😴

[@albertr915]

This here is exactly why I love the Federal HST rounds. They are absolutely 100% without a doubt my #1 choice. The SpeerGold Dot is my #2 choice, but hands down. The HST’s are the ones I use & my #1. choice of defense ammunition.

[@deanhoward4128]

Now I know what to use in my S&W 686 .357 Great video as usual!

[@M4A3]

It's easy to see why there were so many 1 shot stops with the .357 Mag. Whether it is the king of that stat, or not, its easy to tell its capable by any standard.

[@JT-mg9pd]

Tools, what's a good holster for the gp100 357? I picked one up today and studying up on your 357 ammo vids.

[@monsoonthagoon]

I only have two and don't carry it often because I prefer concealed carry, but the Bianchi leather OWB holster is sturdy and beautiful. The thumb strap was a bit snug but a bit of oil and stretching made it work. I bought it ~6 years ago for $65. I also have one of those cheapo nylon shoulder holster rigs from Amazon with two pouches for speed loaders. Great for vibes, but for actual carry I don't know. I think it was $25, maybe $30.

[@johnnyv.223]

Most excellent demonstration, brother Tools. I've been a fan of .357 performance since the 80's. This is some really good ammo. I would LOVE to see a (TRUE) 10mm bonded HP like this one, a Gold Dot, or Winchester Defender, in a 500 or 1,000 Rd case lot, at a discount. I think there are a lot of folks who would also appreciate such an offering. I'm hoping someone from those companies sees this and acts on it. They gotta hurry. The Zombie apocalypse is coming fast and furious.

[@ToolsandTargets]

Thank you sir.💥🧟‍♂️💥

[@mikeshell4968]

I really enjoy your ammo reviews! I’m having the hardest time, finding some 10 mm buffalo bore. I have tried several of the local gun shops, and nobody has any in stock.

[@ToolsandTargets]

Appreciate that. I've never seen it stocked anywhere locally, sadly.😣

[@Borophyll]

Midway and buffalo bore has em

[@MilesLong556x69]

Google it

[@tennredeye]

Wow what performance. Can't wait for the Henry 20" review of this HST 357 offering. Great, informative video...Cheers!

[@garygates5679]

GREAT VIDEO TOOL .. !!!! THE FEDERAL HST IS GREAT STUFF,,... !!!!! THANK YOU ..!!!!!!

[@PileofBrass]

I just ordered and received 3 boxes of this for carry in my 3" 686 Plus. What a performer ! Thanks for a great vid, Tools.

[@joebob4609]

Love to see it out of a carbine. If you instead of just shooting for velocity you could see how it groups at 50-or 75 at the same time. That would be cool, as cucumber.

[@ToolsandTargets]

😎👊

[@ottergt]

How about a 16" carbine gel test? Both looking great out of 4" and 2"!

[@ToolsandTargets]

I think both of my .357 rifles are 20". I forget what all I have.😆

[@ottergt]

@@ToolsandTargets - That'll work! Any rifle/carbine length barrel!

[@buffalosoutdoors]

Good performance. Thanks for the test.

[@ToolsandTargets]

Thank you sir. Appreciate ya!😎👊

[@steelpunisher6944]

Nice! Federal hits another home run with the HST. I figured when this finally got released it would perform but that was phenomenal performance from the 2”! Awesome video as always good sir 👍🇺🇸🇺🇸

[@RealtyPro7]

As always the best most uniform ammo testing around! With the same gel and clothing barriers plus retesting ammo to give some a second chance, these tests help each person decide which ammo suits their particular needs. If companies are intelligent enough to watch and read, and care about their customers, these videos can also help them to improve. If they choose not to improve after seeing their shortcomings, then these will definitely help people know where to spend their money and what companies to cut loose. No one needs to carry ammo for EDC self defense that might be likely to fail or underperform. Only buy what’s expected to work and passed 3rd party tests repeatedly ✅

[@ToolsandTargets]

Amen. Appreciate ya, brother!😎👊

[@JJ_SDWR]

Good stuff, and man, another illustration of the MASSIVE difference in energy a couple extra inches of barrel makes when it comes to 357.

[@ToolsandTargets]

Pretty crazy difference.😎👍

[@timrobinson6573]

You going to do a Tools Targets and Turkey livestream soon for Thanksgiving time?

[@ToolsandTargets]

🍂🦃🍂

[@brenttuttle7268]

Come on Tools.....you gotta test this ammo out of a long barrel lever gun.....would love to see that velocity 😁😁

[@ToolsandTargets]

You know it.🤠👊

[@angrysheepdog9744]

As always TT delivering the goods. HST definitely best of breed in hollowpoint design. I think the federal site also offers bonded rounds in 357.

[@RimfireAddicted70]

Kinda hard to find anything wrong with those results. Both look to deliver textbook expansion, penetration and energy on target. Great review! I'll have to order up a few boxes and see for myself!

[@frankbutta9344]

I had a couple of boxes in my online cart last week,but didn’t get it. Now I’m Getting It!!! I carry 2.5” and 4” S&W 686+ revolvers, and this looks great!

[@ToolsandTargets]

Agreed 😎👍

[@ikocher]

I'm hoping one of those next tests is a rifle barrel. These could be great alternatives to the Remington HTP or Hornady Custom XTP loads I have for hunting.

[@ToolsandTargets]

Yessir 😎👍

[@johndilday1846]

I am gonna have to get me some of that ammo! I have a couple 3 inch .357s and a 4 inch revolver that I have been considering carrying. Thanks for showing it.

[@brucevaughn2886]

Just got back from the range shooting revolvers. S&W 18-2 and 586, both four inch. 18 gets lots of use for DA, etc. 586 was second time to range since purchase. Both are outstanding revolvers. Will absolutely be buying a box or two of this stuff. Been using 125 gr. JHP’s. Think I like the performance of this load better.

[@ToolsandTargets]

I was a little surprised to see this heavyweight do so well in the 2".😎👊

[@momo619916]

I've been waiting for this video, I had been looking for videos on this for a while but no one had one up yet. This is exciting.

[@ToolsandTargets]

Great stuff.😎👊

[@randyduncan795]

Glad to see that Federal got the memo about people who take the time and expense to buy magnum cartridges wanting magnum performance. I'd expect these 154 grains to do even better through windshields and car doors. Very nice velocity out of a snub.

[@Z_BoyPanduh]

The thing I love about HST’s is they always preform excellent and consistent no matter the barrel length.

[@LYMANHALL30]

Again, awsome content. Im a big fan of your productions and always looking forward to the next edition.

[@gwidwock]

I received 3 boxes of these 357 magnums from Rogers Sporting Goods on-line. Thanks for the video.

[@TonyBarber-vb5ep]

Very impressive how the short barrel performed. The 4" was flawless. HST'S are just hard to beat.

[@alexandermfernandez9283]

So glad Federal finally released this round in .357 , it's my "go to" cartridge . But I can't say I'm surprised by it's performance 'cause I've yet to see you test a bad performing HST . Thanks so much T&T , you're "The Man" !

[@ToolsandTargets]

Thank you again, my friend!😎👊

[@CookieMonster_1969]

I knew this was going to be interesting, .357 Mag always is.👍 Not that I doubted the HST at all, it is my go to for any caliber.

[@ToolsandTargets]

Pretty much a guarantee with HST.😎👊

[@jameshood9694]

Thanks for testing these. I love the HST loads on 40 S&W and 45 acp. Been wandering how these 154 grainers would do. I'll be using a Rossi .357 Mag with a 6 inch barrel, so they should do even better. Love your videos. Keep up the good work.

[@ToolsandTargets]

Thank you sir.😎👊

[@kevinramsey4673]

That's impressive performance! I'm not a big .357 fan but this was awesome.

[@ToolsandTargets]

Yes indeed. Great stuff.😎👊

[@TeddyBear-lb9ho]

.357 is no joke. I used to think it was the same as 9mm until I watched the ballistic tests.

[@capt.squirrel8516]

I need to get some of this for my 3” barrel S&W model 65. After seeing your test I’m convinced. Thanks for another high quality video.

[@ToolsandTargets]

Thank you sir. Glad I got a few boxes of it.😎👍

[@hillbillydan4721]

I had a GP100, until the SP101 came out, I sold the GP 100 and bought a SP101 in a 2 inch barrel, ain't looked back !! Love my little SP101, Massad Ayoob called it the pocket rocket and that title seems to fit !!!

[@ToolsandTargets]

This GP100 is one of the last revolvers I would part with.

[@hillbillydan4721]

@ToolsandTargets the GP100 is an excellent tool but, it was just a little heavy for my liking!! If I still hunted deer, I would've kept it or my Redhawk in 44 mag !! Love the comparison of the two tools, you do an awesome job on your channel, keep up the good work my friend !!!

[@ToolsandTargets]

Thank you sir. Can definitely understand that for a carry option. 😎👍@@hillbillydan4721

[@kendavenport1405]

Buddy , I appreciate your information ! I was just about to check the net fir the VERY thing you happened to be showing! Plus you told me what I needed to know about a snub-nosed revolver ! Thanks , buddy !

[@ToolsandTargets]

Appreciate ya checkin it out!😎👊

[@charlieweinstock2136]

Thanks as always for the great work. Federal .357 magnum loadings have been monsters for, well, ever. The .357 might be 90 years old, but nobody wants to stand in front of one, that's fersure! Thanks again!

[@ToolsandTargets]

😎👊

[@stevenkimber4735]

It's going to be flying out of a 6.5". Thanks for all the great videos!

[@traumajock]

This WILL be my carry round in all barrel lengths when I get my hands on some. Excellent work and thank you!

[@ToolsandTargets]

Thank you sir.😎👊

[@yomomma107]

Thanks for another great video T&T Just ordered some of this ammo for my lever gun Deer season starts nov. 15 and im extremely excited to see the performance of this ammo out of a 20" barrel on game 💥🦌💥

[@denveready3486]

Would be good to see the same round in a marlin or Henry lever gun to see how the extra velocity and barrel length plays off

[@hawk76richhawkins92]

Nice video Tools , I'm going to pick some 357 HST up .

[@ToolsandTargets]

Thank you sir. This is definitely a winner.😎👊

[@edwardcreel4571]

Can’t go wrong with any HST just tuff finding it sometimes

[@ToolsandTargets]

True times two.😎👊

[@jonclark8155]

Good test. That’s some good ammo. I picked up a box for my 686-6 and switched out my American gunner xtp’s. Now I’m rolling with the hst’s one in the speed loader and the gun.

[@ToolsandTargets]

Deadly!😎👊

[@cadencero5313]

Great!🎉 This is why HST is one of my favorite rounds.

[@ToolsandTargets]

😎👊

[@PerceptionVsReality333]

I have a Ruger GP100 6" stainless & I'd probably get 1,500 fps with this load. I'll definitely be on the lookout for it & put some through my chrono to see what velocities I get.

[@stsva]

Great test - thanks! Looks like this one is a definite winner for short-barrel carry guns (and any other gun you want to run it through).

[@Kaelland]

.357 magnum has been the benchmark against which all other defensive rounds have been measured for a long time, and this is showing us why. Not only was the terminal performance of the bullets excellent, but the exterior ballistics were also interesting. The Taurus 605 averaged 1057 feet per second at 50 yards for an average Ke50 of 381. That's in the neighborhood of what a lot of spicy standard pressure and lower end +P 9mm loads do at the muzzle, and the .357 magnum is pulling that off at 50 yards out of a 2" barrel. The GP-100, on the other hand, really showed what the .357 magnum is. It averaged 1196 feet per second at 50 yards. That gives us an average Ke50 of 489 energy foot pounds. It also gave us a low Ke50 of 476 energy foot pounds and a high of 504. Given that the performance threshold for "real 10mm ammo" is 444 energy foot pounds at 50 yards, this stuff is doing 10mm things better than most alleged 10mm ammo. Thanks for the testing and data, Tools.

[@ToolsandTargets]

Very interesting breakdown. Sometimes I'm in such a rush to edit stuff, I don't even notice some of these numbers!😎👊

[@jasonjackson1402]

Thanks for testing the ammo i carry, in a gun i carry. (605) Your the man Tools!

[@lastnerve3705]

Thanks Tools. ‘ just ordered 2 boxes from Midway…

[@frankbrowning328]

Great performance! Gel isn't as dense as flesh and there are bones in mammals so I'm not concerned about the 22''+ of penetration. I also see this as a good deer hunting load out of a 4-6'' barrel

[@ToolsandTargets]

Exactly. 😎👊

[@bigandy2109]

Saw these in academy the other day not bad performance, but not enough performance to make me switch from the Remington 125 Gr SJHP, thank you for another great ammo test 😊

[@charlesmorgan1879]

Good stuff ! I need the HST in 4 calibers now...the wish list is never ending...dang youtubers...

[@ToolsandTargets]

😂😂😂

[@boblaws9851]

It's almost a waste testing HST. It's just perfection EVERY time. No matter the caliber, no matter the weight, no matter the gun. On top of all that, you can buy HST 9mm for less than $0.60 per round. Probably ought to order another case of 124 gr 9mm HST now that I mention it..... lol

[@NewTraditionalists]

I like HST in 9 and 45 for personal defense against human threats. From dozens of gel test videos I've watched, I have never seen a 9mm HST over-penetrate (more than 18") or under-penetrate (less than 12"). But for personal defense against human threats, the 357 Magnum HST penetrates too deep for my personal comfort and peace of mind. I would take it into the woods, though.

[@ToolsandTargets]

😎👊

[@NewTraditionalists]

*To be specific, it was about 2 dozen gel tests of 9mm HST and these were all exclusively of the 124 grain.

[@ccoop2416]

Impressive how close the performance is from these two barrel lengths with hst"s

[@souljones962]

Hey Tools, Academy has the 124gr Sig V Crown on sale for 15.99 a box. I picked up 12 boxes myself.

[@scotty475]

Love to see the jelly test and the numbers from a levergun. Awesome video. Thank you

[@williamcolley8236]

Be nice to see what the volacity would be out of a rifle. 16 an d 20 inch barrel lengths.

[@TAWier]

Cylinder gap imperfection is causing that drop off in velocity. Mark that cylinder on future tests, and you will see that's where the drop-off is at.

[@ToolsandTargets]

I keep forgetting to do that.

[@robwilson3749]

You know, I'm beginning to think that if Federal slapped a sticker on a bottle of cod liver oil that said "HST," that it would make it taste good. Thanks for video. I for one shouldn't be surprised but I'll be damned if I'm not still somewhat amazed they made that work THAT WELL and that consistently from both barrel lengths. It's unreal. (Except it's not.)

[@truthhurts7836]

It's not surprising for HST, from what I've seen personally and also your videos. As always, I appreciate all that you do, Sir. Keep the videos coming 👍.

[@SDGlock23]

Cool man, I got a few boxes of these in the mail the other day. Love the HST in pretty much every caliber.

[@ToolsandTargets]

Hard to beat em.😎👍

[@jimchambers7548]

I was happy to see how good it did with the 605. My daily pocket rocket is a 605 and looks like I just found new ammo👍👍

[@williammccaslin8527]

Been a .357 fanboy for 50 yrs, good to know this do's what its supposed to, but it is HST,so no doubt in my mind. Thx for the vid TT

[@ToolsandTargets]

😎👊

[@CabinOnTheWater]

I've always liked the HST. A very consistent performer.

[@ToolsandTargets]

Mhmm 😎👍

[@chretired]

Nice test Tools. The only 357 I have is my Henry lever gun and it's more a show rifle. HST always performs at/near the top of the chart. Be vigilant and always be safe my friend.

[@ToolsandTargets]

Thank you sir. You know I'm gonna have to sling some out of the Henry. I have something else to go with it that I gotta do a video on first.😉

[@ESMaddock]

It would be interesting to see how these would do in the gel out of a 16" lever gun.

[@ToolsandTargets]

🤠👍

[@alwaysmakinglyrics7340]

Thanks for these ammunition test. It helps me determine what I purchase and carry

[@kevindutton3676]

Finally starting to get the following you should have. Congrats on passing 50k

[@JarkkoHalonen-dy4zd]

Seen few test and shoot more my owns, This is a great 357 round and if you see or test it you see it works great in different barrel lenght and velocity. I have Dan Wesson in factory 10” and 6” barrel and I made custom 3,25” barrel and HST always work, I think HST is new Remington sjhp😁

[@billsiegloff2150]

Great performance thanks for another test. Will be interesting to sed out of a 16" barrel

[@ToolsandTargets]

😎👊

[@jimmyjoe4488]

I've been running wad cutters in my snub nose, because I never thought hollow points would get enough speed up to expand out of a short barrel. I'll keep an eye out for these at my local shop.

[@ToolsandTargets]

Impressive stuff from a 154 grain out of the 2 inch.😎👍

[@markperkins2284]

Great test, I have been waiting a long time for this one! Made my day to see this test, just picked up this load a couple weeks ago, looking forward to shooting it out of my 6 inch Colt Python. As always Federal HST does the job, It's my sole carry ammo in all the calibers I carry.

[@ToolsandTargets]

Just got in a Wilson Combat rear sight for my Python. Still gotta install it.😎👊

[@markperkins2284]

That's great, I installed both front and rear Wilson Combat sights on mine.

[@ToolsandTargets]

I wasn't gonna change it but people kept commenting that I needed it so I figured I did!😆@@markperkins2284

[@lewismitchell5367]

I wonder how they'd do from a 20" model 92 carbine.

[@luey53]

Just picked up a box of these HST’s. Glad I did! Love your videos by the way!!

[@Cant_Stop-Wont-Stop0329]

I'd love to see tests of the 10mm hornady custom 155 gr. Xtp, lucky gunners 5 round average from a G20 was 1344 fps which is an average of 621 foot pounds energy. Its been a while since he tested them and would love to see an update so we could see if Hornady has kept it the same since thats what I carry. Fyi the box is marked 1410 fps from muzzle on my box I purchased a month ago. Thanks Tools and keep up the great work.