One slight caveat concerning the F-5E radar: It is totally useless as a search radar against fighter sized targets, but only 80-90% useless against bomber sized targets. I have occasionally gotten lucky finding a Tu-95 beyond visual range.
@Majima_Nowhere Жыл бұрын
I hopped into ECW for the first time yesterday and walked out with two 9B kills on completely oblivious fishbeds. And also a few deaths to mirages and the ol' panic-pull-snap-your-wings-off move. She's a fun little plane. Very simple.
@dcsheinlein2 жыл бұрын
very good tips. The F-5 was my first DCS module and it is a great plane for beginners.
@bruswain9158 Жыл бұрын
Is great for beginners but also probably one of the most fun jets regardless as its not fly by wire, looks bad ass, less performance hungry, sounds amazing
@Munky3322 жыл бұрын
@7:18 -- I believe you can fire missiles in an "over-ride" mode by hitting the "DOGFIGHT MISSILE" (forward) button. I'm not sure if this over-rides the jettison switch, but I'm pretty sure it over-rides the selector switch -- an example would be if you went in for a rocket or bomb drop and immediately had to begin a dogfight, hit the dogfight missile switch and you should be able to rip off the Aim-9's
@Dr_Jebus2 жыл бұрын
Very interesting. I'll have to give that a try. Cheers!
@Munky3322 жыл бұрын
@@Dr_Jebus Also, this is more for when flying with a wingman/in a group. Use TACAN in air-to-air mode (A-A T/R) Leader sets up one channel, wingmen set channel 63 channels apart. You ever get lost, just refer to your TACAN nav, it'll give you bearing and range. When I fly with my buddy, whoever decides to take the lead usually sets 92, and wings all set 29. Just think 29-92. They're perfectly 63 channels apart. This should apply for any aircraft that has A/A tacan, not just the F-5 as well. I'll be honest though, I don't know if its possible to see tacan between redfor/blufor. Might be an EMCON consideration... Though in the ECW server I don't think thats a problem.
@Magpie...2 жыл бұрын
@@Munky332 Wow, didn't know. Why does it have to be 63 apart? (I know little of tacan)
@Munky3322 жыл бұрын
@@Magpie... Just the way the radio standard was made IIRC. 962 to 1213 (X) and 1025mhz to 1150mhz (Y), 126 channels each band spaced 1mhz apart, half of 126 == 63. basically works in "stereo", you dial in one freq, and that's the channel your radio is transmitting on (assuming you are in TR or AA-TR), and the channel 63mhz away == your receive freq. little more complicated than that, but operationally all you need to know is dial in +/- 63 channels. Then just make sure you are both on X or Y. X is usually for ground based stations, Y is usually for Air-to-Air.
@joshkrempp10272 жыл бұрын
@@Munky332 Hold on, i knew you got ranging but never noticed a bearing. Did they add this?
@airline3hum6 ай бұрын
Although two years after you made this, I thank you for this superbly informative video!
@xfire76 ай бұрын
Weight on ground switches on the undercarriage override the missile arm switch .
@tomaszwota1465 Жыл бұрын
If you remember to "fence in/out" you don't have to do master arm on the ground. ;)
@Dr_Jebus Жыл бұрын
If I remember!
@tomaszwota1465 Жыл бұрын
@@Dr_Jebus yep, takes remembering to do it on the ground too! Lol!
@Dr_Jebus Жыл бұрын
@@tomaszwota1465 haha, true. I find it easier while engines are spooling, than remembering when focusing on flying the aircraft, getting bogey drops, checking the map etc
@dovaiS2 жыл бұрын
Good tips, except number 2 is actually apart of startup procedure... I'm sure some people might've skipped it at some point though.
@user-iu6sd8su3e Жыл бұрын
Thanks these are a lot of tips I was looking for
@elysia53792 жыл бұрын
Very useful, thanks.
@jfiery10 ай бұрын
I've found as long as I engage the pitch dampner I dont have an issue. So my yaw dampner can stay off giving me that extra roll
@CrazyRussianPilot2 жыл бұрын
nice video👍👍👍👍👍👍👍 !
@Dr_Jebus2 жыл бұрын
Thank you!
@Bullet4MyEnemy2 жыл бұрын
How do you get the SRS overlay to be in that location?
@Dr_Jebus2 жыл бұрын
Crtl+shift+esc cycles the overlay display mode by default. One of those let's you click and drag it where you like in a little window, then repeat to reset it to normal.
@Bullet4MyEnemy2 жыл бұрын
@@Dr_Jebus Oh my god I'm an idiot lmao, I always wondered why anyone would want the box around it like that, thanks man
@Dr_Jebus2 жыл бұрын
@@Bullet4MyEnemy haha, no worries! Happy flying out there
@mche72142 жыл бұрын
I am from AF,the pitch got to be planned ahead.
@Dr_Jebus2 жыл бұрын
Not sure I understand?
@mche7214 Жыл бұрын
the speed indicator has a problem before.
@Tome4kkkk Жыл бұрын
So, no more F-5 love on your channel?
@Dr_Jebus Жыл бұрын
It's only been a month since my last F5 video. An got another releasing in about a week. Here's the latest onekzbin.info/www/bejne/qqrVeWuaqMmHb6s
@Tome4kkkk Жыл бұрын
@@Dr_Jebus Nice!
@mitch_the_-itch Жыл бұрын
The single biggest problem with our society today is that the beginners think they have enough expertise to talk.
@Dr_Jebus Жыл бұрын
Rofl. Why thank you very much. Have a wonderful day too