Top 10 Practical Inventions and Crafts from High Level Handyman | Plinth's Secret Revealed!

What to pay attention to when laying plinth. Angles of unknown degrees are often found at home and in the workshop. Therefore, it is very important to know how to make a perfect plinth from such complex angles. In this video, we show you the Top 10 tricks to get around a difficult graded corner. Super easy ways to get through all the tough corners that are troubling you, only in our "In Progress" channel! SUBSCRIBE!!!
#top #practical #inventions #plinth #secret #diy

[@jamesbarbour8400]

Can't imagine why anybody would use two different sizes of profile in the first place !

[@PantherFields]

Window trim

[@Paul-mx9yr]

When your doing a rehab on turn of the century homes the molding is slightly different then what’s available now

[@troyboody9985]

Possibly room transition

[@greggy9786]

Good video for those who want to install moulding without paying someone professionally.

[@annelieschmedeshagen1576]

Ich bin begeistert. Die Leisten passen mit ihren Profilen perfekt. Gut gemacht und professionell.❤

[@maker-12]

I have never seen such problems done so easily! Thanks for the great tips!

[@Useruserusername790]

This is the most Extra way to measure Trim. Just measure its length and cut it to fit. That's all Building is. Measuring a shape to fit a space.

[@georgesleloup3848]

Bonjour, je n' ai qu'un mot à dire, professionnel ingénieux et merci pour toutes ces méthodes de coupe,a l'avenir je me casserai moins la tête pour réaliser mes travaux d'angles, génial 👍 à bientôt sur votre chaîne bonne journée

[@jonathanryals9934]

My tip for complex moulding sections: first assemble the whole section then attach to the wall for the pieces to line up perfectly.

[@rameshshankar1010]

Informative video for all & wall designing artists in the art of carpentry

[@ranaghfar5273]

Wonderful video.

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@welding-1]

Do you think these methods actually work? I tried a couple of them and the result is amazing and fast!

[@maker-12]

I have never seen such problems done so easily! I did it very easily after watching the video!

[@Felix-vf1ix]

Nice one 👍

[@AlCatrraz]

I am a bit RUSTY on my Geometry, but you woke me up as I saw the solution…. So-called HANDYMEN who don’t know SIMPLE MATH & GEOMETRY will not solve these kind of problems! Good job!

[@kavkaz0260]

Лайк за волосатые руки)) наш человек)) 👍

[@abdulqadir4976]

Wonderful video

[@christinehall212]

Very informative thank you x

[@kittipongin.6392]

So good 👍

[@Sidomulyo121]

Makasih Bosque sudah berbagi ilmunya

[@Adhamjon.20007]

👍👍👍

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@welding-1]

Do you think these methods actually work? I tried a couple of them and the result is amazing and fast!

[@maker-12]

I have never seen such problems done so easily! I did it very easily after watching the video!

[@manueljimenez3265]

Un señor maestro😮😮😮😮😮😮

[@welding-1]

Very Good

[@maker-12]

I have never seen such problems done so easily! I did it very easily after watching the video!

[@patriciocortes3346]

Genial la técnica

[@Adhamjon.20007]

мне нужно это

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@welding-1]

Do you think these methods actually work? I tried a couple of them and the result is amazing and fast!

[@maker-12]

I have never seen such problems done so easily! I did it very easily after watching the video!

[@user-qt3xe5vd3h]

GOOD

[@placidosuarez4358]

🇨🇺😁👏🏻💯👍🏻🆗 Excelente. Gracias!!

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@welding-1]

Do you think these methods actually work? I tried a couple of them and the result is amazing and fast!

[@maker-12]

I have never seen such problems done so easily! I did it very easily after watching the video!

[@MehmetdedemvebenOzer]

Harikasın ustam

[@RanjitSingh-h8b]

Good work 👍

[@loti4711]

👍😎

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@welding-1]

Do you think these methods actually work? I tried a couple of them and the result is amazing and fast!

[@maker-12]

I have never seen such problems done so easily! I did it very easily after watching the video!

[@Adhamjon.20007]

🎉🎉🎉

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@welding-1]

Do you think these methods actually work? I tried a couple of them and the result is amazing and fast!

[@maker-12]

I have never seen such problems done so easily! I did it very easily after watching the video!

[@Useruserusername790]

Corners are either a Y or an Arrow. That's the trick I use. Building isn't as complicated as it seems. It's all pretty basic.

[@joetritone3944]

That sounds interesting,could you explain please.

[@Useruserusername790]

@@joetritone3944 basic shapes.

[@Useruserusername790]

@@joetritone3944 Corners that point toward the wall are an arrow, if they point at you it's a Y. That's just how I do it. I had to learn trim on my own and made alot of mistakes before I figured out how to do corners that weren't perfect 45 degrees.

[@user-ky9it7yq9k]

Супер

[@GlenHui]

多謝分享

[@kasperenblw]

Понять не могу, зачем стыковать 100мм и 120мм, зачем? А взять одинаковой толщины никак?

[@maozeidong]

👍👍👍❤

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@welding-1]

Do you think these methods actually work? I tried a couple of them and the result is amazing and fast!

[@maker-12]

I have never seen such problems done so easily! I did it very easily after watching the video!

[@_maik_]

No. 6 with an inner angle (opposite of the one shown in the video) is missing 😊...would be great if you could add it...

[@danielmireles7854]

Coping saw to make things easier, and its pretty clean and quick

[@nemethneadamilona]

Szuper!

[@Ken-d5k]

Except how many times are you going to show it wrong???? Don't confuse the viewer DO IT CORRECT THE FIRST TIME!!! now shake your finger...geeez

[@oksy39]

👍

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@welding-1]

Do you think these methods actually work? I tried a couple of them and the result is amazing and fast!

[@maker-12]

I have never seen such problems done so easily! I did it very easily after watching the video!

[@Adhamjon.20007]

😮😮😮😮

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@welding-1]

Do you think these methods actually work? I tried a couple of them and the result is amazing and fast!

[@maker-12]

I have never seen such problems done so easily! I did it very easily after watching the video!

[@Ron-no4tp]

Crown molding on the floor with a gap in the back?

[@ianhunt8530]

Why would you have two different depths of moulding?

[@user-tp9dr6wf6o]

Өте жақсы

[@daveb7408]

Pretty sure it would be easier to tear down the house and start over with squared walls.

[@user-ek8zm7ly9i]

روعه

[@user-md4pl8ib5z]

😮 ❤

[@justinhardy4063]

Yeah the crown mold on the floor?wtf

[@JohnCritch-tf4mb]

Exactly

[@hossainkarbassi3440]

🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@realrusskij1]

Just put right piece on the table saw. I don't understand all that hemorrhoids.

[@simonstreet5298]

Yeah.. let’s make it practicable to make hoovering edges harder 🤪

[@patriciocortes3346]

Te pasaste

[@johndenden86]

Watching the first part of this video gave me cancer. I now have to seek treatment for this. I’m glad you’re not working on my house.

[@JustMe-dx5xl]

How to complicate a simple task would be a better title. Maybe, even how to make a poor fitting joint an more time consuming even worse poor fitting joint. High Level Handyman ...... I don't think so. Why take something so simple & complicate it for no gain? For example corner the mitered base board @ 11:45 ....... 4 X 22.5 deg cuts Nice clean joints everywhere with no need to 'adjust' thickness of corner profile. Profile matches perfectly regardless of how complex or simple the shape is. While were on maths ..... Where is the 10 inventions .... You need to learn to count as well.

[@Randy-ti5ci]

Too time consuming

[@user-qk9dj5jp6g]

A

[@mcdonamw]

I hate voiceless videos.

[@AlinNicolaeLazar]

Proastă idee. 😢

[@user-wd7dr5ck4c]

Все равно не сделаешь, это надо работать с этим мастером а он научит.

[@NeilFirbank-en1yd]

🥱🥱🥱🥱🥱 no one watches these videos other than your mates and mum.

[@nukrigubeladze3155]

все верно мои друг

[@whatiswritten1579]

Why would you be joining two different sized moulding?