TOP 2 Tricks To Get Through a Difficult 45 Degree Corner With a Plinth

[@annaplot2073]

oh my god, thank you. i just spend an hour sawing wood. couldn't get it right. you literally saved me)) i am going to try tomorrow again.

[@KNOTWORK]

Very good advice

[@inprogress.]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@mihaipuscasu7357]

Wow, those cuts are something else!

[@MuLLeR029]

Я: Подошел к косяку и смотрю на него. Появляется надпись: "Вероятность успеха 10%. Бросьте кубик".

[@anynamewilldo5323]

Yeah!, mitre box/saw. Job done!.

[@inprogress.]

Have a happy New Year!

[@M.A.Rahman-w6d]

It's my favourite channel in youtube

[@ΚωνσταντίνοςΚανδύλας]

excellent craftamanship.

[@inprogress.]

We are glad that you found our channel useful and that you liked our ideas!

[@inprogress.]

Have a happy New Year!

[@gavinfuchs]

Massive success🎉

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@Rey03jr]

No 2 is beautiful

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@SamiKARA-j3g]

Hervorragend sensationell Meister 🙋🏼‍♂️

[@كوكبالابداع-غ4غ]

نحتاج هذا في الاسقف ممكن تعمل لنا مقاطع عن الكورنيش المغربي

[@elsaint7657]

beautiful ❤

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@JairitoPerez86]

Me gusta tu vídeo pero en el caso de q fuece a poner las cornizas en el techo de gysum como se corta las esquinas ...

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@JairitoPerez86]

En el techo as lo mismo a ver si te sale .. ​@@inprogress.

[@蔡景式]

這是理論上做法，實際上操作時候，牆壁天花板不一定是直線。當不是直線時候這個方法就不能做到完美。

[@خالدالدليم-د7ض]

سبحان الله وبحمده سبحان الله العظيم اللهم صلي وسلم على نبينا محمد وعلى آله وصحبه وسلم تسليما كثيرا

[@MisterBraini]

А что нельзя просто взять стусло, вроде это так называется и по нему отрезать. ? Сбил из 3 реек прямоугольную букву П вложил плинтус угольников сделал 45° прорезал ножовкой и режь как профи не подгоняя каждый угол 📐.. Хотя можно просто использовать торцовку.

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@easytanksgaming3238]

Беда всегда в неточностях - то сам плинтус далеко не 90 градусов в профиль, то пол кривой, то стены... в итоге вроде режешь как надо - а угол немного, но не тот((

[@charlessmith4723]

Why are you putting crown on the floor?

[@GoatZilla]

Because some people are just that vain.

[@mrosskne]

where else would you put it?

[@Matt-re3or]

Why aren't you? You might start a trend

[@charlessmith4723]

@@Matt-re3or you make a great point. I might even put baseboard on the ceiling

[@Matt-re3or]

@@charlessmith4723 you mean like when we do 2 or 3 piece crown?

[@kimdaeseung522]

다른 채널과 다르게 당신은 이해시켜 주려 노력하네요 훌륭해요!!

[@inprogress.]

Thanks for supporting the video. I was delighted! Happy new year to you!

[@LinzseyslilPad]

Why did you draw the first lines that far out?

[@inprogress.]

To be clear

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@LinzseyslilPad]

I mean specifically. I need to do it soon so how do you know how far out to draw the lines?

[@Beatrix_Ditto]

Wow!!

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@LayHengMna]

ល្អណាស់🎉

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@cherny-vlastelin]

А как сделать внутренний угол?

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@꽃이유-l7g]

2번째가 더 이쁘네요 ㅎ

[@brianjohnson7529]

If a trim carpenter installed the crown as base, he'd be getting fired.

[@kiillabytez]

Measure twice, cut once.

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@Menshinin]

Стоп. Угол среза для варианта 3 должен быть другим!

[@gligorgngn2130]

👌👌💯💯👍👍

[@خالدالدليم-د7ض]

روعة

[@НадеждаЧёрная-л4х]

Все пригодиться

[@idetubeid]

👍

[@inprogress.]

Thank you! Your support means a lot to me

[@stuartyaxley6689]

Or use a mitre saw

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@ErnestAlija]

👍👏

[@masterchaselord5290]

Na pierwszym pokazie to nawet nie są te same cięcia

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@TheTylersoadfan]

That tape is not in cm

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@Mr_Hed]

Ну скажим не удивил давай ещё что-то

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@jorgeescudero2996]

Tha kind of molding looks horrible on the floor, like crown looks better, and the cutting like that is horrible too.!!😒😒😒

[@putana-s-maydana]

Давно придумали стусло.

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@mr.y1965]

Für paar Euronen gibt's speziellen Segen bei Baumarkt. So wie auf'm Video wird biemals makellos zugeschnitten.

[@busrafeno265]

Küçük parcanin kesimini yaparkende görmek isterdik göründüğü kadar basit degil

[@Bleed1987]

es ist eine 90° ecke...

[@inprogress.]

Sorry for the title!

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@spacesandwich5593]

You can change titles

[@i.JoanaT]

This doesn’t look nice since the corner of the wall and of skirting board aren’t similar angles besides gives you extra work. Just do what any smart person would and cut the boards at an angle so they form a perfect joint 😂

[@inprogress.]

Thanks for leaving your thoughts in the comments! Can you help me find an idea for my next video?

[@thomasneedham2971]

just mark the back side of the skirt up the wall haahha

[@gaydamak-514]

Пинк Флойд

[@michaelboykin9881]

First, baseboard goe at the bottom if a wall, not crown. Sevind you cut 22.5 degrees on each piece. Carpenter 101, second day. Also when measuring a line between two points, you cut an inch. If you dont know what that means, go back to school.

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@BennyLlama39]

School? *HA!* That's rich, coming from some jackwagon who can't even spell.

[@allindiagovtjobsinfo5079]

It's 90 degree not 45 degree

[@timf4292]

The cut is a 45° to make a 90° corner. Edit: oh the title. Sorry. I missed that one.

[@inprogress.]

Sorry for the title!

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@user-cc3cq7xi6p]

Yeah let’s put crown on the floor.

[@dominater5]

Neither of these methods require you to draw anything on the ground lmao

[@inprogress.]

Thanks for leaving your thoughts in the comments

[@inprogress.]

You are the best of masters

[@Bleed1987]

also its a 90 degree corner. not 45 like sayd in the intro

[@qamvoulos7745]

Cut it 45 degrees

[@inprogress.]

Thanks for leaving your thoughts in the comments!

[@albertlocean243]

Socle en polystyrène c est pas terrible

[@BenjaminReese-h8x]

Yeah...that's a 90 degree corner. Right angles are tricky; how dare two 45 degree corners equal aright angle.

[@TOOL_TECHNICAL]

theyre not always 90, I just did a small video showing a miter saw protractor proving my walls aren't square. I get you mean why go through all the trouble of marking and box cutting. a miter protractor would've cut this job down to a few minutes.

[@ropeadopex]

useless

[@billyscott7769]

No ladder 😞