I just got myself a 2020 Ram 1500 BH Night Edition, and I'm super stoked about it! I've already done some upgrades, like putting in a Jay Greene tune, CAI, iridium spark plugs, MSD Blaster coils, and Dan the Fastman throttle body. My next upgrade is the Stainless Works long tube headers with their legend exhaust, which I'm really excited about. After that, I'm planning on getting the 6.4 ported intake manifold. You're an inspiring and authentic person. Thanks for keeping it real!
@AlMai2226 ай бұрын
That’s a lot of great work. Might as well add a 6.4 cam while you’re at it
@Pablojenkins3rd14 күн бұрын
Damn I got a 22 BH how much did you spend on all that?? Should I get the tune first and then work on getting the parts?? What’s the first step I should take??
@stevenmc620893 жыл бұрын
A custom tune is a must! I’ve had all my gm trucks and cars custom tuned but my 5.7 hemi responded better than any vehicle I’ve had. It was worth every single penny I paid.
@betoevoxgsr3 жыл бұрын
Yes thats exactly what I thought of my 2020 ram after the jay greene tune best money spent
@IncredibleHemi11113 жыл бұрын
Absolutely tune is a must n yes they respond amaxing to tunes
@RC.56 Жыл бұрын
I’m worried about long-term reliability with all these mods, the truck was designed this way to last, adding more air and stress on the engine, can they last 200,000 miles with these mods?
@Jeremiahheartly11 ай бұрын
@@RC.56do the tune first worry about everything else later . This is from l 180 k work truck. Apparently my other comment was deleted .
@frivera7357 ай бұрын
@@RC.56it was made this way to pass emissions
@Rep361Texas3 жыл бұрын
He's not wrong, all of those mods listed are very good mods to kick off your Hemi build! Well said buddy!!
@IncredibleHemi11113 жыл бұрын
Thanx boss
@justingaus34773 жыл бұрын
I tow constantly with my truck, boat and lawn trailer. I’ve seen where people recommend shortys for low end tourque. Speed isn’t really a major concern. I might have to try out that tuner and 6.4
@behnamzamani5907 Жыл бұрын
What’s up big dog getting excited to get my cam from green next month on my 2013 rt Daytona with a circle D and kooks long tubes been watching you for a min love to buy a single cab 1500 2015 after there dope . Was tired of going back-and-forth of stepping up to a 392 a hair but the price is so crazy. My car is paid for computers don’t need to be unlocked decided just to keep my car I love the shape in the lines in the 13s so completely building the engine with newer parts so we’ll probably be refreshed so I’m happy with that.
@garretttate30763 жыл бұрын
Just talked to jay hopefully get a tune by this weekend for the ram as well as some long tubes coming soon great videos brother always a huge help for anything ram 👍
@danevans93473 жыл бұрын
thanks for the video! Okay! I'll get the long headers.
@kennethwindstein29073 жыл бұрын
I have a Durango 5.7. Did the 270 cam and picked up over 100whp. Not kidding. So I would recommend that upgrade for the heavier 5.7 vehicles.
@IncredibleHemi11113 жыл бұрын
Cam is by far the best upgrade but it's not a bolt on or that would be number 1
@user-dh3vy8wm7e Жыл бұрын
Will the 6.4L intake manifold work on 2005-2008 5.7 Hemis? And what about a 6.4L cam shaft swap on a 05-08?
@gsc512 Жыл бұрын
Oil catch can so can get full octane in fuel and no oil in intake manifold. Especially considering you can use a generic can at like 25 and mount it to the radiator support and run tube from the intake manifold, all in $35 or so. Then when you hit the gas and it's pulling full vacuum, you're not breathing. Crankcase vapors
@Pablojenkins3rd14 күн бұрын
Damn I got a 22 BH how much did you spend on all that?? Should I get the tune first and then work on getting the parts?? What’s the first step I should take??
@8hp70cris3 жыл бұрын
I ran a 12 on my FBO 8 speed 4 door on 91 pump gas while testing
@IncredibleHemi11113 жыл бұрын
Hell yea great time
@EliteStricker2 жыл бұрын
Got a 2010 dodge ram 1500 Have a list of stuff I want to do to my truck, have to fix my pinion and gear set Just replaced my gaskets on my intake manifold yesterday
@carlosllama99796 ай бұрын
Great video very informative. I have a 2013 hemi single cab ram 1500 like to get a little more power. If you do those three mods what are the cost 403 and how many horsepower do u add??? Thank u
@amermuscle3 жыл бұрын
I ran a 13.6 with just a longtubes ,varaam and fastman tb . Still didnt get a revision since longtube install . Waiting till Jay opens up . Jw is the 6.4 manifold the same shit eaten grin on the 1st drive like longtubes. I still can't believe the diffrmce arh headers made
@IncredibleHemi11113 жыл бұрын
Yea headers made a huge difference on mine too n yes the 6.4 manifold you will feel also
@mrtootank45903 жыл бұрын
Do long tube headers clear the driver and passenger side.
@IncredibleHemi11113 жыл бұрын
Yes , especially if u get a good set of headers
@kennethwindstein29073 жыл бұрын
Call around for the install before you order. Lot of shops won’t do it anymore
@RC.56 Жыл бұрын
Interested in getting some mods for 22 ram limited, the limited is a few hundred pounds heavier than the other trims because of the air suspension and finishes. It’s brand new, so I don’t think the 64 intake manifold is an option, also at this time I don’t want it super loud, just need some more power out of it. Thinking long tube headers, exhaust, intake, coil packs, tuner.. what are your thoughts? You did not mention exhaust in your top three, if you put on Long tube headers, are you bolting that to the stock exhaust?
@mightymikeamps93173 жыл бұрын
Man o man you’re killing me. Just installed Mopar Performance Cold Air Intake, JBA Competition Longtube Headers, and dual exhaust with Magnaflow muffler. Loving the growl and power gains. Here’s a startup video from yesterday My truck’s new vroom vroom sound kzbin.info/www/bejne/fnith2OHj5psjLs Next up is going to be a DiabloSport T2 Trinity with PCM swap in about a month before I even think of a 6.4 ported manifold, injectors, and throttle body..
@IncredibleHemi11113 жыл бұрын
Hell yeah 🤟
@Lilmiddwest9 ай бұрын
I'll swap out headers for valve body upgrade for RFE65.
@death_awakened5848Ай бұрын
Do you have the links by chance
@Dispair062 жыл бұрын
One of the first mods I do to any new or old vehicle is the headlights Finally! BLACK FRIDAY is HERE to SAVE the Day! Headlight Revolution has got a killer Black Friday sale for everything in the store! You can snag deals on items for up to 25% OFF! Don't miss out this next week on these great deals while you can! You don't want to wait to upgrade the lighting on your vehicle! Check it out Starting Monday the 22nd!
@1234tellmewhatyourlookingfor2 жыл бұрын
Best mods is there when you buy the truck. Locking rear diff, with 3.92 gear Quad cab not crew for weight reduction. You dont have to play catch up. 18 inch rims not 22s. Thats if you want to be quick off the line. Turning oversize rims requires more power to get them moving due to inertia You can do taller tires instead.
@FanucciSlictop Жыл бұрын
Yea I just learned bigger tires means having to change different gear ratio im glad I kept 20s instead tryna flex it out
@dakotadonofrio12523 жыл бұрын
I’m planning on whipple supercharging my 17 1500. I was wondering if you have any suggestions towards a boost oriented build. Whipple is coming out with a 3.0L for the rams in about 3-5 months
@daveweaver614277 ай бұрын
With the 3 mods, you mentioned how much of an increase in horse power would that be?
@amermuscle3 жыл бұрын
I have a muffler delete and just installed arh with cats its ridiculous loud . What muffler would give a deep bass feeling in the chest . Its way too raspy and highpitched . Also I couldn't believe the diffence in power and sound lol .
@IncredibleHemi11113 жыл бұрын
I like the sound of mbrp the best which is what I have, carven is loud n sounds good n then then there's borla
@edgarramirez27333 жыл бұрын
Bummed out I got 2015 ram, I have to get a new pcm for tuning which means having to spend more money
@IncredibleHemi11113 жыл бұрын
Yes it does. I got lucky with my 14 not needing a pcm
@shannonlewis36873 жыл бұрын
The Ram 2500 6.4L air box will fit the 5.7L 1500 if switching to the 6.4L intake. Only difference between the two is the top and the hose.
@IncredibleHemi11113 жыл бұрын
Gotcha, good intel 👍
@obamavariant91282 жыл бұрын
Is it better?
@MrC9Oh32 жыл бұрын
I put a 3.0 whipple on my 3.6 V6 its quick
@grizzly81763 жыл бұрын
Thank you ik I’ve been needing to install long tubes for a min now on my 2016
@IncredibleHemi11113 жыл бұрын
Absolutely lobgtubes were one of the best mods I ever did
@cammedramprocharged49273 жыл бұрын
When is motor done I want see thy forged 6.4
@IncredibleHemi11113 жыл бұрын
As soon as it's done I'll be deriving to pick it up
@alanthebeast15072 жыл бұрын
what is the name of the cam kit you got for your Ram or which one do you recommend?
@i8Rout9 ай бұрын
What about the 1500 v6, I know I know v6, What bolt on mods are you able to suggest, or do you think are best for the Ram 1500 v6?? Thank you
@williamdaye67602 ай бұрын
What is the best MODS for me 2015 Dodge Ram that have the 3.6
@DeltaH-92 ай бұрын
A 5.7...
@gekborg3 жыл бұрын
When you say a “custom” tune. Can you elaborate? I have an 06 ram with a superchip flashpaq back in 2012 I installed it with a 91 performance tune built in to the tuner. I’ve also made my own adjustments on the gears etc. so is that a custom tune or do you mean someone with knowledge to install a tune from a tune shop based on mods? Do you know if it’s beneficial to buy a newer model superchip for a 06 ram at this point ?
@IncredibleHemi11113 жыл бұрын
Yes a custom is a tuner that will modify the tune for your mods and will adjust the tune via data logs so you can get the max performance out of the vehicle
@kennethwindstein29073 жыл бұрын
Yea it’s specific to your area, altitude and gas octane to get the most from your car specifically.
I have a 2013 outdoorsman it has a single exhaust would I still be able to put in the long tube headers or no?
@michaelhuerta39223 жыл бұрын
Would the 6.4 Intake manifold work with a procharger or any centrifugal supercharger since it doesn’t replace the stock manifold?
@IncredibleHemi11113 жыл бұрын
Great question I think It will especially if you get piping for the manifold from procharger, or make custom piping to accommodate the new inlet
@kennethwindstein29073 жыл бұрын
It will work but not the same benefits from an NA build.
@briantjuarez53052 жыл бұрын
So would I be able to just slap on the 6.4 manifold on a 4.7?
@Tristanallen773 жыл бұрын
I have a 08 Dodge Ram with 180 thermostat and a CAI and long tube headers. How much time do you think a custom tune from jay would knock off my 1/4 mile time?
@IncredibleHemi11113 жыл бұрын
Could easily be half a second I'd not more but that's in a 4th gen. Not sure how much in a 2008
@kennethwindstein29073 жыл бұрын
Agreed! A ton of power to be gained. Just the trans tuning will knock off time
@ryanbrown84133 жыл бұрын
Yo, do u have to port the intake manifold to get gains or would I be wasting money if I don’t port the intake??
@IncredibleHemi11113 жыл бұрын
Porting will get you very minimal gains if any imo
@itshector39433 жыл бұрын
Hey there just getting into car and trucks more can you explain why they are good mods.I was just hearing more power but can you elaborate just a little more on why and what is the purpose of every mod. Just starting out so don’t bash me haha
@darioavendano3693 жыл бұрын
Too many different tuners with pre-tunes which one do you think has the best one or any source you know of that proves any.
@rvodvlog92412 жыл бұрын
Any specific longtube recommendations for a 2010
@inktheghost2 жыл бұрын
6.4 manifold will not fit Etorque models. Jay and I found that out last month
@ericdavis99923 жыл бұрын
Will that 6.4 manifold work with pre Eagle 5.7 2007 ram?
@IncredibleHemi11113 жыл бұрын
Not gonna lie I don't think it will
@ericdavis99923 жыл бұрын
Ok 10-4 I was just looking into it also and everything I’ve found says it probably won’t work either
@7thkev5193 жыл бұрын
Probably not gonna fit cuz I think the pre-eagle has a different intake compared to the eagle hemi.
@wmbmilkman7733 Жыл бұрын
When changing to the 6.4 intake, do you still do the cold air intake and throttle body? 2017 5.7 what’s the best air intake @ throttle body? TB size?
@IncredibleHemi1111 Жыл бұрын
Throttle body on the 6.4 n 5.7 are identical. Best cold intake imo is the s&b cold air intake for the 2500 to match the 6.4 intake
@Scattypatty3 жыл бұрын
I have a 13 ram 1500 been lookin into a tuner I got a 5.7 and 8 speed she’s a big horn 4x4 been lookin for a link for a tuner can’t find a straight answer anywhere is there any way you can shoot me a link been watching for a long time only reason I got a new ram with the 8 speed lookin to get a new manifold soon taking out the y pipe and throwing a flow master back on liked the sound a lot better than what it is now
@IncredibleHemi11113 жыл бұрын
Contact greene racing on Facebook for the actual tune. Go to guage performance or moes performance for the link to the actual handheld tuner.
@Scattypatty3 жыл бұрын
Thank you so much man is there any way I can keep you along with my build I love watching your channel and you’re my motivation to make this truck an 11.7 quarter mile truck
@isaiahvian85163 жыл бұрын
Whats your thoughts on the hellcat tb with mmx adapter on a ported 6.4 truck mani? Some are saying no gains? Im fbo and soon to be 2.5HL cammed by jay
@IncredibleHemi11113 жыл бұрын
I had that setup when I was na. It ran better with the bigger tb the gains are very lil compared to another Ported tb especially on an na setup. Boosted setup the hellcat tb is much better
@isaiahvian85163 жыл бұрын
@@IncredibleHemi1111 well maybe i will pull the trigger just to be ready for the future, pretty much just waiting for the on3 setup to come out. Would be cool to have a cammed turbo 5.7
@4point6Punisher3 жыл бұрын
What size tires are you running?
@leonardolaraperez77443 жыл бұрын
What headers you running?
@josefernandez71033 жыл бұрын
Will I need a different throttle body for the 6.4
@IncredibleHemi11113 жыл бұрын
Nope, we have the same throttle body as the 6.4
@josefernandez71033 жыл бұрын
Thanks
@kennethwindstein29073 жыл бұрын
I had good luck doing a ported one from MMX
@sgtslaughter008210 ай бұрын
What is I run ethanol free?
@Ghilliemon3 жыл бұрын
I think already asked you this before. But is the edelbrock victor efi worth it? Pretty much a 6.1 intake that fits 5.7 6.4
@IncredibleHemi11113 жыл бұрын
The victor 2 is amazing if you are running big cubes or Boost.
@kolbeybowen903 жыл бұрын
I’m not seeing any superchargers from whipple for the ram 5.7 do you have the link to the one that you have?
@IncredibleHemi11113 жыл бұрын
It's off there website right now because there working on the new gen 5 3.0 , u can still buy the gen 4 2.9 off of authorized dealers
@kolbeybowen903 жыл бұрын
@@IncredibleHemi1111 dang alright
@jalailama64453 жыл бұрын
Says the gen 5 is for the Durango .. ?
@gavo02136 ай бұрын
Is that the stock ride hight of the truck or do you have a drop/leveling kit on it? If so if you don’t mind sharing it with me?
@IncredibleHemi11116 ай бұрын
This has a maxtrac 2/4 drop
@gavo02136 ай бұрын
@@IncredibleHemi1111 did it effect your ride that much? I own a 2012 Ram 1500 express looking around to drop the truck just haven’t found a whole lot on it until I stumbled across one of your videos.
@kdsrc61273 жыл бұрын
Do you know a good tune for a 2018 ram 1500
@a.m.ldesigns7096 Жыл бұрын
Maybe you can help me out, I’m looking for a performance upgrade water pump better then the oem water pump for the ram 1500
@IncredibleHemi1111 Жыл бұрын
You don't need one
@kenflauding60412 жыл бұрын
When I bought my 2013, fist thing I did was install an S&B cold air intake, 48mm throttle body, and tuned with an Edge tuner. I’d like to install long tube headers. Can’t go catless. Have to pass inspection.
@bottomfeeder123 ай бұрын
I’d add a Hellcat oil pump…
@DeltaH-92 ай бұрын
You can do that? What's the benefit?
@bottomfeeder122 ай бұрын
The benefit is its better than the stock and prevents a hemi valve tick by higher velocity… shoots oil up on them lifters better
@DeltaH-92 ай бұрын
@bottomfeeder12 Ah, ok, thanks. I didn't know that.
@kings66283 жыл бұрын
I got a 2021 ram 1500 Etorque will the 6.4 manifold fit
@IncredibleHemi11113 жыл бұрын
I think it will but I'm not 100% , ask Matt at moes performance he'll know
@kings66283 жыл бұрын
@@IncredibleHemi1111 ok thanks
@timothywilson85263 жыл бұрын
So I bought myself a 2021 Ram 1500 Quad Cab Big Horn back in December. This is my first ever pick up truck that I’ve ever had. I’m thinking of ways to get more horsepower out of my engine such as putting on a cold air intake and a new exhaust (possibly a cat back exhaust). Up until last week, I never knew you could add a supercharger to a 5.7L Hemi V8 in a Ram pickup until I stumbled upon one of your videos in my suggestions. Now I’m really thinking about adding a supercharger to mine at some point in time. I know this might sound like a stupid question, but putting a supercharger on my engine would void the warranties that I currently have, right? I figured if I had to, I could wait until all my warranties run out before I do that since superchargers are expensive as well. What would you do in this situation if you had a brand new Ram truck and was in the position that I’m in?
@kblack3563 жыл бұрын
I made the mistake at getting short headers, I was like you, not sure we're to start. Get the long headers, myself purchased the Diablosport i3tuner wasn't sure what I was doing, caught on, but I have a 2014 so didn't need to send in my pcm, cause they need to unlock before you can even begin. Do do any major modes till your warranty runs out. If you want you can buy peddle command, increase take off buy 30% easy to install. Don't get flowmaster cat back exhaust, that I purchased buy magnaflow exhaust way better sound. Don't remove your catalytic converters, till warranty gone, the replace them with magnaflow catalytic converters. Some places ther not required, just saying. If you do decide to get a hand held tuner, etc remember you need to run on 91 or 93% fuel. Hope that helps. This is a great channel to watch lots of nuggets.
@giannidomenichelli5093 Жыл бұрын
At what hp does the trans need to be upgraded
@IncredibleHemi1111 Жыл бұрын
From what I've seen on around 750-780
@IMTheOnE19843 жыл бұрын
What oil do u run? What gear do you have in the rear? Did you change ring and pinion? I'm about to start upgrades on my 12 ram which is why i ask. Also do you re tune after each upgrade? Might seem like a dumb question but i genuinely want to know. I also just picked up a 6.4 skat challenger 6 speed manual & want to know where i should start on that monster. It's a fucking blast to drive.
@IncredibleHemi11113 жыл бұрын
I run Pennzoil 5w20 n yes I get returned after every mod
@IMTheOnE19843 жыл бұрын
@@IncredibleHemi1111 synthetic?
@IncredibleHemi11113 жыл бұрын
@@IMTheOnE1984 yes of course
@IMTheOnE19843 жыл бұрын
@@IncredibleHemi1111 awesome, thanks man & i dig the channel good job dude keep it up.
@IncredibleHemi11113 жыл бұрын
@@IMTheOnE1984 any time man thanks for watching
@zackb.79753 жыл бұрын
I live in Atlantic city lol
@1234tellmewhatyourlookingfor2 жыл бұрын
64 intake Mmm
@ModernRedHemi3 жыл бұрын
How do I build my ram to beat yours? 😂
@IncredibleHemi11113 жыл бұрын
Lol I basically give ppl the recipe
@johnsineni3 жыл бұрын
Lol, do the same mods just have a 2wd, single cab. You will be better on weight by a few hundred pounds. There is your one to two tenths.
@ModernRedHemi3 жыл бұрын
@@IncredibleHemi1111 just giving you a hard time brother 😂🤣😂
@kennethwindstein29073 жыл бұрын
Single cab brother!
@danevans93473 жыл бұрын
What is a good brand, not the most expensive, but an affordable good brand. I'm willing to pay for a good pair...Don't want a cheap Chinese.