Top 3 Reasons Your Whirlpool Cabrio Washer Is Not Draining!

In this video I cover three reasons why a whirlpool cabrio/kenmore oasis washing machine is not draining. The video shows how to troubleshoot and repair your washing machines drain issues. The washer is in the video is model number WTW6400SW2. This video is part of my series "Free on Facebook" which is a series of videos in which I repair, repurpose, and reuse things I find for free on Facebook marketplace.

[@derickmccarrell9593]

Thank you for taking the time to make this video. Hopefully I’ll be able to save an elderly couple some money!!

[@DuctTapeMechanic]

Best of luck!

[@healthystepsforward]

Thanks for your help! Washer back to working again.

[@DuctTapeMechanic]

Awesome! Glad to help!

[@MicheleHuffman-ud9or]

My carrion has black panel with all push buttons so my washer is doing the no drain thing and stop in the cycle

[@robinbates7630]

Is there a filter on this kind of washer? I am getting white redue all over my black pants. I have cleaned it and used the recommended cleaner. Please help

[@NakeshInc]

Do you think it is advantageous to do a voltage check at the drain pump connector to see if the control board and the wiring are good?

[@DuctTapeMechanic]

Yes, I would recommend that, especially if you are doing technician level repair. Sometimes, in these videos, I try not to go into the deeper troubleshooting steps for simplicity purposes.

[@artblanco6162]

Hello, I have an older GE/Frigidaire stack washer dryer. On the spin cycle it sounds normal without clothes in it. When a load is put in and goes to spin it sound very loud like screeching. Any idea on what it could be? Thank you

[@DuctTapeMechanic]

Sounds like bad bearing. Unfortunately, that's a tough/expensive repair

[@alexelrayo9261]

If i got 16.1 ohms reading from the drain pump is it within tolerance or is it fried? I know you said 10-15ohms Great video! Thanks!

[@DuctTapeMechanic]

Yes 16.1 ohms should be ok. But please be aware the pump can still be mechanically broken

[@BrunoFerreira-sf6gr]

🙋‍♂️..🤙👍👏...thanks...

[@DuctTapeMechanic]

Your welcome!

[@unicornsteaks6769]

I can trick mine to pump out. I set it to drain and spin. It drains and stops. Then I reset it to drain and spin and it spins out. What's wrong with mine?

[@DuctTapeMechanic]

Sounds like an issue with the RPM sensor

[@Eric-wg9sg]

Skip to 1:45

[@MicheleHuffman-ud9or]

Cabrio