Top 4 RSS Transmitter Design and Installation Criteria

[@savedforever7702]

Thank you for this video. This is very valuable information for my install. If I'm running two inverters with two strings per inverter, should I have 2 separate RSS transmitter kits? Thanks

[@Tigo_Flex_MLPE]

Excellent question! Since each RSS Core can handle 10 PV conductors, you may only use one RSS Transmitter for both inverters! If you have any questions please contact our support team.

[@nolanbatteryfowarder5932]

great!!!

[@clivebrown400]

Can I bundle my ground wire for my panel/rail with my home-run? I don't see where there would be any crosstalk there. I need to get that grounding wire across the roof and into my rooftop entry-box.

[@Tigo_Flex_MLPE]

That is acceptable. Thank you for asking!

[@SaymonPM]

Does the power that feed the power supply unit that converts to DC supply, need to be from the Solar power or permanent utility power supply? And why?

[@Tigo_Flex_MLPE]

Great question! The RSS Transmitter must be fed by an external 12V/1A power supply fed by a breaker on your AC panel to ensure proper rapid shutdown operation. Please follow the instructions in this video for a safe, Code compliant, and worry free system.

[@emmanuelpetilo7050]

Is it ok if every transmitter have different main breaker in ac side. I mean is it ok if the followers have different breaker from a leader

[@Tigo_Flex_MLPE]

They leader and followers should turn on and off at the same time. So they should all come off of a single breaker.