Top 5 BEST MODS For Your New Edge Mustang *1999-2004*

[@dandeve]

I think everyone starts the Mustang mod with exhaust 😂 makes people turn their heads and since it’s slow they get to see it for a long time. My next mod is coil overs. That is a great point about gears though so I might have to add that to my plans.

[@CovertGarage]

Sound is the most important part! Gear make a huge difference so definitely add it to the list!!

[@otisdriftwood8469]

I have an 03 gt. I swapped the 5 speed for a t-56, 6 speed. Lowered the car almost 2 inches, staggered bullit style wheels, 315 on the rear, 245 on the front. Flowmaster x pipe no cats. The exterior and interior are in beautiful condition. Smoked LED lights all around. Of course, 15% tint as well. Its a very solid car, and now its going to get a vortec supercharger. These cars are a blast to drive, they look awsome, and you can modify them pretty cheap. Easy to work on as well". End of day, i will probably have 13k in the car. Looks great, will be very quick, and not a ton of money. I think a lot of people are looking to these cats for that reason, im not spending 70k on a car, i love the challenger, but i will crush them soon, for 10% if the cost.

[@CovertGarage]

Sounds like you’ve got a sweet build going!!

[@otisdriftwood8469]

@@CovertGarage I'm working on it! They are fun to drive and mod. They also seem to be creeping up in value. Have you seen that as well?

[@arthurfrank1724]

What kind of flowmasters do you have ? 40s, 44s or 10s

[@otisdriftwood8469]

@@arthurfrank1724 40s if I remember correctly. It has a nice deep sound.

[@arthurfrank1724]

@@otisdriftwood8469 Ok, I think I have 40s on mine. They are old and rusty looking. Not sure how long they been on the car. They sound good. I have shorty headers and a BBK H-Pipe. But looking into the 44s.

[@JROC734]

Best mod for a Foxbody/SN95 is a good set of subframe connectors.

[@CovertGarage]

That’s a good one!

[@Youretryingtoohard]

I have a Kennebell 2.1 on my 01 2v, making about 420hp. It’s still not fast by any means, but the combo of a 90s plastic interior, loud exhaust, and insane torque makes it feel like you’re doing 300mph 😂

[@CovertGarage]

I love this hahah🤣. Totally accurate depiction of these cars lol

[@Thegcodee]

Man damn right I might be slow but I’m having a hell of a time daily driving my beauty

[@sergiodoordie319]

Looks Kool sounds like a muscle car

[@NewEdgeDesigns]

Great advice on the mods!! Good video..What do you have done to achieve 300whp??

[@CovertGarage]

Thank you! I did a full rebuild with just about every bolt on I could get. Sitting at just under 300 whp. If you want a breakdown of every mod I have check out my video "Cost of Building a Full Bolt On New Edge Mustang". At 4:34 of that video I have a full parts list with costs!

[@bigchas77ify]

Here's a warning. The intake manifolds had a poor design at the hose connections. DO NOT go with a doornan replacement. OE is the best way to go and the design problem has been fixed. You will lose so much acceleration if you go away from OE, unless you high performance that's expensive and looks better than the original but not really performs for the price.

[@willybeamon]

A lot of older cars won’t compete with newer cars. I jus like the new edge cause their fun an sound good and very enjoyable an face it… where are you gone use 1000 horsepower

[@rickgarza45]

A lot of new cars are not going to turn heads neither like a new edge lol

[@Adam_S281]

Best bang for the buck is a used vortech for under $3k

[@CovertGarage]

Power wise, I think you’re totally right!

[@tttsc4714]

Me personally I would of kept the majority of that money saved and change the exhaust and lower it and cold air intake and that’s it later on coyote swap it tbh but rock out man

[@CovertGarage]

Totally get that! For straight performance coyote swap is the way to go

[@tttsc4714]

@@CovertGarage fr bro I’m gonna get the f150 coyote because it is a lot cheaper and I can just change it up to go in the mustang and just go crazy

[@CovertGarage]

@@tttsc4714 Heck yeah that’s gonna be so cool! Good luck with the build!!

[@adamagapie4667]

8 grand lol? And gained 40 HP? Cmon bro you did not put 8 in that engine and you didn’t even boost.

[@scottwagner2317]

"The first thing I think you should do to your mustang is....give it a commercial"

[@Claude_van_Dammage]

what are you building

[@shockz6473]

whered you get the recessed side scoops?

[@CovertGarage]

@@shockz6473 I believe they are stock. Came in the car when I bought it

[@maxeimlucchese9590]

Is a 92 5.0 faster?

[@CovertGarage]

I’m not sure. That would be an interesting race

[@NewEdgeDesigns]

Not trying to be that guy but 3:27 stock ratio…just in case you want to correct it..

[@CovertGarage]

Hahaha you’re totally right thanks for pointing that out. Don’t know why I always say 3:23🤣

[@hermansanchez8512]

There is no way you put that much into it and not be fast. I have comp cams, full bolt ons, aluminum driveshaft, short throw , coil overs, 3.73 gears , tune and my car does 12’s on the 1/4 I spent nowhere near that much… you got ripped on price and probably paid someone to build it

[@sammiches6859]

New Edge Mustangs look like a polished turd to me. It's like a pitiful attempt to facelift the 94-98 melted cheese mess look. That being said, I bought a 2000 V6 from my girlfriend's dad and got it driving for under $230 after it was sitting for 4 years. I'm almost happier than the day I bought my 2014 GT.

[@breezyalvarez4262]

So bro said he on a budget but spent 8k I forgot he’s white lol that’s a small budget for them

[@darkside7802]

You thinking of putting louvers on?

[@CovertGarage]

I definitely want to! Just holding off on getting more parts till I graduate in may!