TOP 5 DJI Osmo Pocket 3 Accessories PRO Filmmakers Can't Live Without!

[@Pulse8Reviews]

Accessories featured in this video… • Mounting Expander for DJI Osmo Pocket 3: shorturl.at/QoaHH • SwitchPod Tripod: shorturl.at/wuZpT • K&F Concept ND/PL Filters: rb.gy/fer271 • TILTA 4.5 inches Electronic Suction Cup: amzn.to/3yWMuYF • PGYTECH CapLock Magnetic Mount: amzn.to/3Tja4FJ Thank you for watching we appreciate your support!

[@trainwithcharan]

youre going to be at 10k subs in no time. amazing content

[@Pulse8Reviews]

That’s so kind of you to say buddy, I hope so, thank you 🙌

[@saxophonicmusician]

I still use my switchpod tri-pod. Got it when it first came out and still useful in certain situations!

[@Pulse8Reviews]

So did I, it’s a great little bit of kit, plus I love how it opens and closes with the sound of the metal 🤣

[@MurphyDWasHere]

Thanks for the tip mate

[@Pulse8Reviews]

Glad you found the video helpful, thank you 🙏

[@redesignedlife777]

time for you to get on the falcam f22 quick release system. That will level you up even more!! That cage seems cool. But my most important accessory is the mic2. And there is no cold shoe thing for me to attach it to. And I can’t screw anything on in the front side. Which means I can’t slap it onto a backpack strap at a good angle.

[@Pulse8Reviews]

Well, how strange is this for you. Falcam have been in touch with me the past couple of days and they’re sending some great kit for me to review, including a pretty unique attachment device for the Pocket 3 which may resolve your issue buddy 👍

[@redesignedlife777]

@@Pulse8Reviews looking forward to the review

[@Pulse8Reviews]

It’ll be a couple of weeks yet as I want to test it out and give a fair and honest review. So make sure you’re subscribed buddy 👍

[@danreibold]

why dont u link all the stuff in the video like any other decent review channel :D

[@Pulse8Reviews]

You know what, it actually slipped my mind. Happy to send you a link or two for the ones which took your interest, or just search Amazon buddy 👍

[@whateversendmereferrals]

@@Pulse8Reviews Yea, Bro you could've got a commission. Great video btw.

[@Pulse8Reviews]

Everyday is a school day for sure, and that is very good point and something I will certainly implement moving forward, thanks for the advice 🙌

[@princeofthe96]

Bro started off with a rhyme😂.. SOLD😅

[@Pulse8Reviews]

The only rhyme I will ever do buddy 🤣🤣

[@MakeTheShots]

I recommend the Inst360 3m long selfie stick. I used it attached to my Pocket 3 to simulate a drone shot in a big warehouse gym. Works a treat. I saw film maker Brandon Li use it.

[@Pulse8Reviews]

What a fantastic idea, we have a long stick from our 360 camera, but not 3m, I might have to get one. Thank you 🙏

[@livemusic]

I like Ulanzi’s MT79 light stand. It extends to 79”, has rather wide and sturdy legs that fold out and a tilting head. When not using the legs it’s a smooth cylinder that’s great to grip. It of course has a little wobble when extended all the way, but that hasn’t been a problem when shooting.

[@MakeTheShots]

@@livemusic nice! 👌🏻 To be fair, we all can have a little wobble when stretched to our limit 😂

[@Pulse8Reviews]

🤣🤣

[@livemusic]

@@MakeTheShots so true! 🤣😂

[@marklholloway]

Don’t forget the MovMax mini gimbal for mounting Osmo Pocket 3 outside of the car! It’s like a tiny Ronin 4D package 😅

[@Pulse8Reviews]

I would’ve added these in, but don’t own one yet, as soon as I get one, I’ll create a video 👍

[@khalilismyname]

Excellent detailed show and tell. The only issue is that the more I see, the more I want 😂 Glad I found your channel ✨️

[@Pulse8Reviews]

Thank you so much, why do you think I have these things because I watched a video on them too 🤣 And I’m pleased to welcome you to my channel, thank you buddy 🙏

[@khalilismyname]

@@Pulse8Reviews you did an amazing job 👏🏻

[@Pulse8Reviews]

Thank you so much for saying. Some people can just be so mean on the comments and when someone like you takes the time to let me know, it means the world 🙏

[@khalilismyname]

@Pulse8Reviews 🫶 ignore the negativity and keep pushing forward 💪 ✨️ if it effects you they win you lose 😉 So when you see 👀 the negative comments, just smile and laugh for success has haters and later down the line they end being your Fans 💯✨️

[@Pulse8Reviews]

Such sound advice buddy, even on the negatives I look on as positive as they ended up watching the video anyway, so who’s really winning 😆🙌

[@matthiasgehtwandern]

I use from DJI Pocket 3 Case from Scotty Makes Stuff and from ulanzi TT35 hiking kit

[@Pulse8Reviews]

That’s cool, they’re certainly great options too. I guess all comes down how you want to use your Pocket 3. I know I could certainly make hundreds of accessory videos for this camera. Thank you for the recommendations🙏

[@markjob6354]

*@**1:00**: What's the use of a metal cage which fails to protect the entire upper part of the camera ? Tilta could have just as easily extended the metal cage to cover the entire length of the gimbal camera without it interfering with the flip up screen in any way, nor covering the built in camera's microphone ports. Part of the idea of putting a cage on any camera is to also protect it from damage during heavy use as well as providing for the attachment of various accessories.*

[@Pulse8Reviews]

I would agree with you on that Mark, and something until you pointed it out I hadn’t thought about. I got this so that I had mounting points rather than protecting it. I think this is because there’s no way you can fully protect the Pocket 3 just by the pure deign of it. I’m not sure even could with the head turning 360 degrees 🤷‍♂️

[@livemusic]

The Pocket 3 camera and gimbal are so fragile that extending the cage higher would be pointless and add weight. It’s not as if you could have a cage too close to the gimbal. And though I always have the cage on the extra battery, it was designed to still fit without it meaning it has to be shorter.

[@markjob6354]

@@livemusic It would NOT be pointless, and it's not as if the OP3 is a heavy camera to begin with is it ? Why does everybody think I want the cage length extended to the point it interferes with the gimbal mechanism on top of the camera ? I never wrote that and I never even suggested that. However, the cage is too friggin' short and needs to be *extended to just below the gimbal mechanism near the top of the camera.* The new improved cage could be shaped in such a manner to provide full clearance of the flip screen, and have ports to allow the three tiny on camera Mic ports not to be covered by it. I think this is a reasonable approach.

[@livemusic]

@@markjob6354 When not using the extra battery and only have on the short extention with the 1/4 20 hole, the front bar on the cage comes just below the joystick and record button. Technically the back and sides could be extended higher, but for this type of tool I don't see where I could possibly benefit from that. and there couldn't be another support arm across since it would have to slide over the joystick and record button. I wouldn't care to use the Nato rails or mounting points any higher than they already extend. And with such a fragile top to it all, we have to be very cautios with it anyway. Just how I see it. Maybe more see it like you and they'll listen to the requests.

[@billmacp]

the primary function of the cage isn't to protect ANYTHING it's to add mounts. exactly what do you think needs protecting at that end of the camera?? if you drop it it's game over for the gimbal no matter what else you've got needless protection on. Do you see?

[@PearTreePictures1950]

so why don’t you list them. Don’t you just hate these videos when the don’t list the gear

[@Pulse8Reviews]

I get annoyed too and can’t believe I didn’t think about the links myself. There’s just so much to remember when you’re producing hopefully helpful videos for people. It’s noted for next time 👍

[@adz-ql6kv]

and for the video chapters you just wrote “accessory 1, accessory 2, accessory 3” etc. instead of the actual accessory. for the amount of time and effort it takes to create a video like this I can't believe this was overlooked unless it was done on purpose.

[@Pulse8Reviews]

@@adz-ql6kv Really appreciate the feedback, it was however done on purpose, we have now pinned all the accessories in the comments 👍

[@PawFromTheBroons]

@@Pulse8ReviewsIt’s not only good for your viewers to be able to find the links directly in the Description, but it's also a no-hassle source of supplementary income for your Channel whenever you decide to have affiliate links.

[@Pulse8Reviews]

Will definitely implement that on future videos, thank for taking the time to write this @PawFromTheBroons

[@madeiraislander]

The cage definitely looks pretty good, if it had a coldshoe on the side it would be perfect. I would change the tripod for the Ulanzi MT-44 though, it gives you a much longer reach and it's perfect to make cool crane shots! 😁👌🏻

[@marklholloway]

It has 1/4-20 and NATO rails. You can get the Smallrig 1/4-20 to cold shoe for $8 or the Tilta NATO to cold shoe 😅

[@Pulse8Reviews]

That would be amazing, maybe on version two they’ll include a coldshoe. And thanks for the advice, I’ll check it out 👍

[@LorenaBerrenbaum]

Its not late to put the link.. good review and content.😊

[@Pulse8Reviews]

We have now listed all the accessories as a pinned comment in the comments below 😆 hope this helps, and thank you for commenting Lorena 👌

[@samuraiintellectual]

The cage makes it twice as heavy, the switch pod make it very inconspicuous, the K&F filters have a very weak magnet and are not very easy to adjust.

[@Pulse8Reviews]

I agree on the weak magnetic mount for the filters, although we’ve never had them fall off. The cage does make it heavy and we only use it when mounting on cars, so not an issue. I guess it comes down to how you use your Pocket 3 👍

[@samuraiintellectual]

@@Pulse8Reviews Ulanzi makes a smaller push button operated mini tripod similar to the switch pod that works quite well for the pocket 3

[@Pulse8Reviews]

Ok cool, I’ll have to see if I can find it. Thank you so much 🙏

[@livemusic]

The cage adds a small among if weight to a very lightweight camera. It’s no big deal. I keep mine on at all times. I can quickly add my phone mount with the Nato rail, do the same with a handle on the other side and screw it into a monopod. And it does as a little protection to the extra battery when attached there.

[@samuraiintellectual]

@@Pulse8Reviews it’s a TT38

[@Reckimedia]

Can you please let me know the name of the magnetic suction mount? Many thanks for your review of these products.

[@Pulse8Reviews]

Thank you for watching Reckimedia and of course, PGYTECH CapLock Magnetic Mount: amzn.to/3Tja4FJ

[@SanoyNimbus]

Does the Tilta cage work with the extended battery?

[@Pulse8Reviews]

Yes it would as it’s mounted with the quarter thread too buddy, I just keep it like this so I can quickly change it 👍

[@AliSufianWasifOfficial]

kinda kills the purpose of something meant to be in pocket and is literally called a pocket camera 🤔

[@Pulse8Reviews]

This is very true, all these things you certainly can’t put in your pocket 🤣 But it’s amazing what these companies come up with and how you can use it in so many different ways don’t you think? 🤷‍♂️

[@richmal50]

Where can u buy the cage?

[@Pulse8Reviews]

Amazon is your best bet, just search Tilta pocket 3 cage 👍

[@RandomLifeProductions]

Here is the thing that case will overheat in the summer

[@Pulse8Reviews]

It may well do if you’re constantly recording with it. But in England, we don’t seem to get our summers anymore 😆

[@freshkisimotheshow]

No Links or name on the description lol, bad start for a youtuber ):

[@Pulse8Reviews]

Hey buddy, thanks for the advice, I’ll update this as soon as I can and make sure I have some product links in there for you next time 👍