AVOID This Common MISTAKES When Building a Basement WALL

This video will show you some of the most common mistakes that DIYers like myself tend to make when framing a basement wall. I’m finishing the basement in our 40-year old home, and videoing each step along the way in a future bedroom. I am NOT a pro - just a self-sufficient DIYer finishing my basement on a budget. I've leveled the concrete and converted an old garage door threshold into an exterior door and window, and now I’m building the last wall in the room. I could totally hire a pro to come in to frame this thing for me, but why hire it out when I can build it on a budget myself???
Special thanks to Philip White for his help with this project!
Links to Products Used in the Video:
Dewalt Chop Saw: amzn.to/3t7dnGq
Dewalt Air Compressor: amzn.to/48gEYDF
Bostitch Air Nailer: amzn.to/3Ri1PYY
Dewalt 20V Drill: amzn.to/46WNwie
Level: amzn.to/3uU4EYH
Tape Measure: amzn.to/41mnaEU
Speed Square: amzn.to/41lXwAb
As an Amazon Associate, I earn from qualifying purchases. I will receive a small commission at no additional cost to you if you follow a link and purchase a product.
Subscribe to Mancycle DIY for all things home and garden DIY! / @mancyclediy
If you found this video useful, please consider subscribing for more DIY home and garden ideas. Thank you SO MUCH for watching! I hope this video helps you take a step closer to self-sufficient living and to becoming a more capable and confident homeowner, renter, land owner, or just an everyday person trying to live more sustainably. Recycle, Upcycle, MANCYCLE!
Music: Giants Were Here by SLPSTRM
Link: artlist.io/roy...
00:00 Introduction
00:46 Mistake 1
01:18 Mistake 2
01:46 Mistake 3
02:48 Mistake 4
03:35 Assembling and raising the wall
04:07 Wall height demo
05:05 Mistake 5

[@mancyclediy]

Need step-by-step instructions framing your basement wall? Click here: kzbin.info/www/bejne/oZPNkoqcbcZqY80

[@bluesyoucanuse3170]

What's this? Charismatic host? Lots of information given in an easy-to-digest and concise manner? I'm not sure why the algorithm suggested this but it's a welcomed sight! I wasn't even planning any projects but this type of content is right up my alley. Liked AND Subscribed!!! This channel has the right ingredients to get huge in a hurry. Keep up the great work!

[@mancyclediy]

So kind of you to pass along this encouragement! THANK YOU!!!

[@LordFlubber-pd1tw]

Wonderful video, great tips and enjoyable to watch. Thank you Mr. Mancycle!

[@mancyclediy]

Hey, thank you so much! And thanks for checking it out!

[@funnyharleyman]

For something like this I go metal studs all the way. You can “piece in” wall parts as you go and no need to keep sawing something, a pair of metal clippers in your pouch and you’re good to go. Also, you can cut a 10 stud (or more) bundle at one time.

[@mancyclediy]

I've never thought of doing it that way - thanks for tip, and thanks for watching!

[@davidhopping3043]

Quick tip, under cut your treated plate part way thru the door opening before standing up your wall so you don't have to run your reciprocating blade into the concrete.Also a partition wall in a basement that is installed to tall (tight) can take the load off your foundation and direct the load unto a possibly week floor or even worse allow shifting of your foundation from external forces

[@mancyclediy]

Awesome tip - I'll do that next time!

[@Airick29]

Wish I had done the thing where we leave the bottom plate in. Oof.

[@mancyclediy]

I've made that mistake too. Hey - thanks for watching!

[@rayjackson4547]

Another little trick is to leave the end studs out until the will is up then install them. This way it will not drag along the other stud walls or concrete walls when your trying to raise it.

[@mancyclediy]

Love it - thanks for sharing!