Top 5 Most Fascinating Recycling and Manufacturing Process in Factories | Mass Production

In this video, we're going to be looking at the Top 5 Most Fascinating Recycling and Manufacturing Processes in the Factories .
This video is packed with information about recycling and manufacturing processes, and we hope you enjoy it!
0:00 - In this video, we're going to be talking about the Top 5 Most Fascinating Recycling and Factories Manufacturing Processes.4:28 - We're going to be discussing the different processes that are used when it comes to recycling and manufacturing.8:27 - We're going to be discussing the different steps that are taken when it comes to manufacturing.13:39 - We're going to be discussing the different types of recycling that are used.16:49 - We're going to be discussing the different types of factories that are used .Please share this video with your friends if you enjoyed it!
#skillspanda2
#scissors
#mostfantastic
#amazingprocess
Your Other Quires:-
Manufacturing process, Manufacturing process of cement, Mass production, Mass production process, Factory mass production, How to make, Top 5, Factory process, Random things, Top 5 mass production videos, Top 5 most viewed manufacturing videos, Top videos, How its made, Making process, Top 5 most popular mass production videos
Also Watch :-
• Video
• How to Make Giant Band...
• Escape the Ordinary: I...
• Prepare to be Amazed: ...
Please Don't Forget to Subscribe Skills Panda
Thanks For Visiting and Watching
Contact For Product Queries:-
WhatsApp: [phone]
Best Regards
Skills Panda 2.0

[@rafiqkatana]

That lock is awesome. They even tell you what lockpick to use to open it by putting the number on the outside.

[@philthycat1408]

The ‘AxePipe’, excellent. Wish the Vikings had that type. It may have chilled them out a bit.

[@kevinmullner4280]

Die Sicherheitssandalen sind immer wieder beeindruckend.

[@moppeltoll]

.. und das sind nur die Scenen in denen sie für die Kamera extra die Sicherheitssandalen anhaben... Man achte am Ende beim Farbspritzer auf den Atemschutz, der erst bei der nächsten Einstellung genutzt wurde. Wäre sicher auch keine Hilfe für die vorangegangene Galvanisierung. ;-)

[@raheemraza9419]

Nice بہت عمدہ

[@hubertanderson7044]

I swear it makes me want to send shoes to these people they work so hard and long and good at what they do

[@twentyofseven]

human ingenuity. love watching it. thanks

[@user-lb9ei2kc6s]

Great respect for the man that is preparing plastic bottles for the recycle!

[@skillspanda2.0]

Absolutely!

[@jorgeseijasval4779]

Condiciones vergonzosas de trabajo

[@scroungasworkshop4663]

That would be a soul destroying job.

[@user-pe5us2xj6b]

I admire and appreciate their hard work

[@MarkK01]

Every person in these videos worked there butts off. Well done everyone. You should be proud of the work you do.

[@satyaprakash03133]

Yeah! But no one else should.

[@SnyderTools]

I’m sure they all read your comment and are very happy for it.

[@tassosvassiliadis3514]

they are all worth of an admiration because under these circumstances THEY make mirakles..!!!! ( FROM GREECE)

[@giovannirazza9938]

Complimenti ragazzi vi meritate un ❤❤!👋👋👋👋👋

[@adybarker4733]

I'd buy one of those locks just for the fact that they are hand crafted, respect where respect is due.

[@troth6251]

I just love the skill of this man building these locks, so quick and accurate .

[@juantrevino8608]

They're beautiful!

[@petermoto409]

Just like they did in the first world 150 years ago.

[@donnienicholson6062]

He should be getting two paychecks.An American would be holding a phone in one hand.....he's working 2 hands and 2 feet.

[@satpalkhurana7071]

​@@donnienicholson6062LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLllllllllllllllllllllllllllllllll,

[@Arjay.M88]

@@donnienicholson6062 An American designed the machines they use 150 years ago.. American's just made better machines and processes today.. but nice insult lmao

[@jay-arbenong9681]

Every one in this video are amazing be careful guys your lovely family are waiting after every work ..hi ho silver!!!🏅🏅🏅

[@donnienicholson6062]

The process itself is fascinating but everything being made is one of a million stacked up at each station.

[@WilbertOlivera-db8vt]

Me encanta apoyemos al pequeño emprendedor.

[@valekkrava9928]

Замки класс! Я бы себе такой купил! И топор тоже!

[@pcrokima7323]

Bohot acha. India Mizoram Chhippui village Mamit District.

[@nicolasortiz]

Muy buenos trabajos

[@arthurberg4532]

MARNOWANIE ZDROWIA ‼️ ACZKOLWIEK SZACUNEK 🙏

[@elvisoshaughnessy4109]

This guy going to here forever sorting out the plastics

[@richardmiller5238]

👌👌💯

[@ua..1484]

Трудяжкі, дякую вам

[@skillspanda2.0]

Thanks for watching

[@mairajak5522]

Quality pad lock😮❤

[@waynethomas3638]

I empathise with the man stripping the labels off as I did the same for some 6 thousand bottles for a home project and then used bench shears to shred them!

[@mattikaki]

Those MASTER Locks are probably better that the original Master Locks. 🙂

[@jmarcqu]

que maravilla de artezano

[@gordongrantham8782]

That's a cool ass chain knife I wish I had on.

[@juantrevino8608]

Beautiful locks!

[@skillspanda2.0]

Thank you!

[@everydaycompress4259]

THAT AXE BOWL ILL TAKE ONE !! .. slaying dragons and toking all in one XD

[@Y_as_sen67._]

❤❤❤❤

[@tommypitcock9928]

WOW!

[@keshavaprasad2422]

*Great job! Your workmanship is unmatched.

[@donizetepereira9185]

👏👏👏Meu professor🤝

[@sustainsus1]

The making off the locks is amazing, it is 300 years back in time;

[@moppeltoll]

.. and bigger is better !! ;-)

[@petermoto409]

It's not at all "amazing". It's simply very old technology.

[@chilledoutpaul]

Love seeing the padlocks being made and glad to see a variation of key levering and cuts, but I dont know where they hid the other 4 or 5 leavers to make the 10 lever locks. its a big shame such a fantastic hand made product and its all spoilt with the lie on the box (10 levers) 😞

[@cindzz47]

I can’t believe that guy is powder coating those parts with just a covid mask on😳 he needs a respirator

[@somannair5961]

Superb 🎉

[@skillspanda2.0]

Thanks 🤗

[@frankwawin1528]

Amazing

[@skillspanda2.0]

Thank you! Cheers!

[@honda2555]

Prima Beil, erst nen Pfeifchen,dann dem Nachbar eins Überziehen😂

[@TimfromAlabama]

I wonder why they tear off the labels on plastic bottles. They're made of plastic,, too, and most recycle centers here in the US don't remove them, just let them go in, too. Dude is a champ, though, with all those flies and working with removing the labels. Bravo to him for being committed.

[@hnakazawa63]

爺さん見てると人間リサイクルに見えて来る。古くなった人間に仕事を与えやる気を与える。

[@jessequintero1122]

How can I obtain a lock like the one in the video 42:28. I want one but cannot find anything on the internet.

[@svechnikov94]

Замок перед сборкой не мешало бы смазать

[@andrewnicholson4689]

The locks are excellent - sturdy and with care will last for years. But toxic dangerous working conditions, skill levels aside will result in early death rates.

[@user-ly1zb1eg7z]

프레스페달이 손으로위로하는것 안전에최선인것같아요 수동작업에서안전은그이상없을것같아요.

[@waynethomas3638]

add a few more holes in the axe pipe to make a flute!

[@Rigoknow]

👍

[@robotmad]

Jeez pouring that molten metal into those padlock castings wearing only flip flops.

[@boinkmaticgaming5835]

Does the Pipe/Axe come with some Opium or Hashish?

[@kode2018]

proses yang menghabiskan banyak energy untuk sebuah kapak, itu seperti pemborosan

[@rockyperez2828]

Anybody know where I can buy a dozen of these locks at

[@j-sin3344]

The first guy peeled off so many coke wrappers his hair turned red from the paper.

[@anniedavis6030]

That was henna on his hair

[@twentyofseven]

having said that, at 47:10 there is a suspicious edit.

[@multicategoryvideo6813]

Armor dressed for royal army, muilt style food trays for public, as army , Ramzan celebration...Royal armored school, college in Shahi qila,shahi fort Lahore ...

[@leandrosilva.1668]

Sou do Brasil como que eu faço para comprar essas obras primas

[@skillspanda2.0]

Please check description there mentioned contact information.

[@timothyferguson105]

I loved the hand made lock. Where can these be bought?

[@skillspanda2.0]

Thanks for watching, contact is mentioned in description

[@jonaslennon7861]

@@skillspanda2.0 olá, não estou conseguindo ler o contato dos fabricantes de cadeados, pode me dizer o nome deles por favor?

[@mikeraphone6745]

B&Q sells them . Don't use them to lock anything of value as I had a lock like this and was picked open by some scum bags. Yes fair play to these guys .

[@stephenwest9757]

If you can drill the shackle then file and bend it on an anvil it is not hardened. They would be so easy to break you would not need to pick it. So as you say don't use it to protect anything valuable. A few hammer blows and I think it would be open. I have seen it done on better padlocks than that several times at work when people have gone without unlocking their locker.

[@anniedavis6030]

Imagine the heat they have to suffer!

[@oculusangelicus8978]

There is a reason why these locks stopped being made in the Victorian era. Because there were to individual independent tumblers that prevented the lock from being opened with a single pick with e 90-degree bend in it. this lock is so easy to pick that it might as well not even be there. the only people it is going to stop is the honest people, criminals look at that and laugh. As for the knife at the end of the video. the technique used to create the knife is barely above amateur level, the hydraulic press being used is being used upside down and using the body of the press as the anvil which will eventually end up breaking the press and the steel put on the end of the chain for the cutting edge is not only put on wrong, but it was obvious that he was having an issue with it as a result of being done wrong, the hammer he was using was both too small, and the wrong kind of hammer with an inappropriate shaped head , thus making the hammering ineffective for proper forge welding. The once the "blade" was being finished the cold shuts can be clearly seen in the blade steel and cracks as well. then dipping the blade, with cold shuts in it into a water and acid mix will only weaken the forge weld and make the blade fail sooner rather than later. in other words, apart from the plastic being cut up for recycle almost everything being made in this video is junk.

[@skillspanda2.0]

Really i am thankful for watching, you watching with interest, yes there was crack on knife. Hope you still connected.

[@user-fo6oz1tn6o]

В каких то кирпичных сараях,на коленке,из "говна и палок" -индусы делают шедевры !!!!

[@indahnoviawindri345]

Mantap Asik asik asik barakallah 👍❤️⭐🇮🇩🇮🇩❤️❤️🇮🇩🇮🇩❤️❤️🇮🇩⭐🇮🇩

[@shakourshakour9992]

جميع العاملين لا يستخدمون معدات السلامة العامة اثناء العمل

[@donnienicholson6062]

I believe some of those artists could thread a needle with tongs while wearing thich leather gloves.Are you Forged in Fire contestants watching?? You don't need to waste time chopping the billet...draw it out,fold it over and keep Big Blue pounding out those Damascus layers.

[@jimalcott760]

Why?…. Who wants an axe, that’s also a smoking pipe…?

[@andrewj3177]

Why not, there are people who gonna buy them. Like Gandalf for instance

[@bahizoom]

peace pipe or tomahawk pipe

[@dutchcorners]

@wisespaid7 you gotta do a review on this one 😂

[@herbertchristiandetlef8957]

Egal was die Typen bauen, alles Ausschuss

[@user-wk8ef4ul7c]

I can't find the Web site for the knife and lock please help

[@georgegonzalez2476]

You have ten guys and $200,000 of equipment making maybe $25 of plastic scrap an hour. Can they even break even?

[@koriw1701]

So how much recycling do *you* do George? Do you process this much out of *your* plastics? Be grateful you live in a country where this stuff is taken for granted.

[@georgegonzalez2476]

Those guys are not independently wealthy. They are working for like $1 an hour. They are not doing this for the fun of it. Just Google plastic recycling economic: Typical entry: Recycling is an energy-intensive process that becomes more costly as additional steps such as post-consumer selection and washing are added. The new plastic is still relatively cheap to produce and creates a competitive environment in which added costs to the process make recycled plastic significantly more expensive. @@MQJ007

[@cynthiacasterline308]

how do I get one of those locks?

[@skillspanda2.0]

Please check video description i mentioned there contact number

[@petermoto409]

You need a time machine to go back 150 years.

[@multicategoryvideo6813]

Hello,will you make clothes manufacturer industrial machinery's for Shahi qila Lahore Pakistan

[@user-oi2ei3st5i]

плану топорик рубанул набил дунул хорош инструмент два в одном

[@MsChistik]

Где заказать такой замок?

[@skillspanda2.0]

Please check video description all details including contact information are mentioned

[@mikeraphone6745]

I suppose you could ask these guys to make anything they could. In my cupboard under the stairs i have about ten pairs of work boots. Some of these boots have never been worn. My old boss brought me new work boots every few months and i don't like wearing in new shit . There size 9 and these boys can have them free . Just need to collect them . If you have them i want to see you wear them in your next video.

[@skillspanda2.0]

I wish it was up to me and I could do it,But I appreciate your sentiments

[@munawarazad413]

🎉tala banane me Aaj ke CNC ke daur me lever, chabi, reverting bhi manual labour se bana rahe afsos hua.

[@kerryjones4107]

How much is the axe in Australian dollars please

[@ianmoss9945]

So nice to see them working rather than them phoning me trying to scam me for a google card😂

[@user-lw4wn2zl7i]

Ты возомнил из себя колонизатора в пробковом шлеме! 😂

[@asifmirza7916]

Mr. Manager Why your Employee did not have One Uniform.????

[@giuseppesaleri1559]

la voglio quanto mi viene a comprarla ?

[@skillspanda2.0]

Please check description contact details are mentioned

[@m9ovich785]

Interesting way to sort Plastics. Removes the label's, ok.Them some Caps and not others and no rings removed ?? I wonder if the Guy sitting on the double Rung Ladder across the Conveyor bought it from the 90 year old in the other Video ?? The camera Guy sure has some great Arm Hair HAHAHAAHAHAH

[@railroad6601]

Wow... they can handle broken glass with bare hands. Only in Pakistan, Incredible!!!

[@davidkohler7454]

This is all pretty amazing, but Why do they feel they need to use the Masterlock name. Ever heard of copywrites.

[@webanut]

У цепного ножа ручка паршивая. Сломанная.

[@Arjay.M88]

That lock, with so much effort, is a piece of trash for a lock.. it is literally a fancy steel bar through whatever it is you're "locking" lol... nice work though, for sure. Better "lock" than I could make..

[@antoninjansta5627]

💪💪💪💪💪👍👍👍👍👍👍👏👏👏👏👏🍺🍺🍺🍺

[@renetr6771]

Need to resharpening my tobacco pipe.

[@ForYahwehYeshua]

Coca-Cola "All 100% Recycled plastic" Where your recycled plastic comes from:

[@chrisrageNJ]

My man is working too hard, put the bag over the chute and swap them when they’re full

[@petermoto409]

Efficiency is not their forte.

[@shavingsdiy]

Дорогая,я сегодня чутка задержусь на работе,шэф работы подкинул,думаю лет через 500 освобожусь😂😅😊😮

[@xinixxagnix201]

Time for Bill gates to do this work and they watching. Love you all, may teh Lord be mercyfull.

[@multicategoryvideo6813]

I want you make twenty-two million swords , utensils specially ,10000 cooker,blade for shaves, .rat trap house,etc .I am going to lived in newcastle so make 300 shops inside castle,build shopping mall, restaurant, gorcery store, school,...you all are doing to lived in America...

[@nigelbeaumont1109]

WOW…. Molten metal and Flip-Flops. Poor souls.

[@user-ui3jo9li9p]

makan tuh botol, tempat jagal lu bikin gituan !!!

[@periferi6850]

В вашем пластике крови не обнаружено

[@amyhund3786]

Offene Sandalen in einer Gießerei. Wie ist es möglich das die Arbeiter in den Videos aus Pakistan noch alle Gliedmaßen haben? Da müsste es doch zu unzähligen Arbeitsunfällen kommen. Oder habe ich in der Ausbildung zum Maschinenschlosser etwas falsches gelernt?

[@fjgdlud8030]

Это для баджаджа что ли???

[@gissie391]

He needs safety shield on that sander theyoung chap grinding axe head.i thought the wooden handle was going to be small table leg very dangerous workk ooh ooh.no stell toe caps just bare feet oh bless.ooh ooh .

[@hero750000]

Wie gut das wir in Deutschland alle Plastik Flaschen sortieren 🤦🤦

[@railroad6601]

Hardworking & creative people of a nation with Nobel Prize in nuclear physics among others. Foreign investment to update the production factories will go a long way.

[@annoyingbstard9407]

If their religion allowed education maybe. And if they stopped marrying their cousins.

[@user-lw4wn2zl7i]

Инвестиции вернуться в виде ракет из канализационных труб!

[@A-px7ko]

Kachre ka kam Pakistan me hota he, bahot videos dekh k bol rha hu