TOP 5 THINGS That WILL BREAK on your G35 / 350z !!! (100% Guaranteed)

[@JakeyHD]

Man. everthing he listed my G35 has been in the shop for LMAO

[@BeDistinct]

Damn haha well at least you got it taken care of

[@marcocaravantes422]

Honestly only the valve cover I wouldn’t try to do just bc of the time it takes all the others you should a diy it

[@GIOVANNITH3G35FAN]

Bushings and sensors are a pain in the ass for these cars. Great video Brodie

[@BeDistinct]

Thanks fan and yea especially bushings. The amount of force needed to remove and install them are crazy for some of them. A hydraulic press really comes in handy.

[@FireSafe-u1l]

Are sensors essential?

[@anqeldasaint110]

Just got a g35 with around 180k miles and had some issues. This list solving some issues I couldn’t detect

[@damiencoffey2391]

Don't forget trunk lock wiring, fuel gauge, and solenoids to unlock the doors

[@VairdayG35CarClub]

Dope content for the g35 community it’s info is much needed and appreciated 💪🏽💪🏽💪🏽

[@BeDistinct]

Anytime Brotha 🙏🙏🙏

[@PYROtheNomad]

Most of this applies for the vq40de as well. I have a pathfinder with the vq40 and it literally threw a code for a camshaft position sensor like a couple hours ago. Clean g35 btw

[@juanpagoada3127]

Man thanks for letting me know bout the camshafts, I’ve been dealing with that problem for some months already and never knew what it was🙏🏽

[@BeDistinct]

Anytime Brotha 👍

[@richardharris8608]

My 2007 G35 sedan has 117500 miles on it. No problems at all. Love my G...

[@clevelandjohnson3279]

Same miles and same car here definitely a cool car lol

[@sepiroth31]

Everything he just mentioned Is everything I just replaced. Including the valve covers! It took awhile! Next is front hubs, rotors, brakes, dbl din. And completed 3 inch catback

[@ericromagna870]

Thinking on getting one....those are not dead bad things!!! Thanks for the video

[@Q40SWAY]

Great list of things to keep an eye out for! Preciate the tips bro!💯

[@BeDistinct]

Anytime Brotha, hopefully they help 🙏

[@midnightg3593]

Been running 5w 30 engine oil on my g35 04 for awhile I always kept up with the oil but didn't really pay attention to the viscosity level it was way too thin ended up ruining my lifters I recommend a thicker oil if you live in a hot area

[@BeDistinct]

Damn that sucks considering that’s what Infiniti recommends. I have been running 5w-40 as well. Had to bump up viscosity after getting boosted.

[@midnightg3593]

@@BeDistinct lucky you, you were able to catch it before any damage happened I sold mine sadly

[@gagetozser8985]

Every single one happened on mine lol. Key is to do them before they happen because they absolutely will happen

[@BeDistinct]

For sure 100%

[@hvllxwxxn]

bought an 05 350z last year and literally everything in this video has happened

[@anthonypaez2506]

Helped me so much just got my g35 3 days ago

[@vihaananu1102]

Not bad. Looking to get one within a month. Not really a car guy but this gave me a hard nudge towards it. Appreciation is given.

[@midnightg3593]

4:13 just yesterday my homies strut collapsed we think it was bc of the LCA all the bushings were bad and had so much play

[@CorreiaXL]

Facts lol I got 2 out of the 5 I'm dealing with rn I just replaced window regulator wouldn't go up or down and I got the camshaft sensor code got a appointment next Monday to put new ones in

[@BeDistinct]

Yup they all those problems start happening out of nowhere but glad you are staying on top of it

[@morrellcynthia]

Hello hey what is it called when the back coils are in that bucket you know what is that called? How can I replace that? What’s the name of it to replace it?

[@gabrielherguth4382]

Literally just ordered every part he mentioned in the video for my 04 g35😂😂😭

[@lofeop2798]

Just got 1 for 1k

[@cmacspinz]

@@lofeop2798wow one k I paid 4k

[@DimitriVelair]

@@lofeop2798what u got for 1k a whole g35 ?

[@slunnym7282]

I just bought a 08 g35 sedan with 157k miles on it I’m worried it’s going to have problems later on and I don’t know a lot about cars but it was in really good condition on the interior when I got it but it does have a loud idle noise

[@clevelandjohnson3279]

Aslong as your Rpm’s aren’t jumping and the noise is steady with nothing weird I wouldn’t worry about it idk what car you had before but the gs are loud in general

[@timmay6713]

07 g35 DE engine owner here. I agree with the valve cover leak and window regulator going out. As for bushing wear, it makes squeeking noises but idgaf. the car is at 300k miles

[@ragztheking]

Lmfao same 😂😂 i'm about 55k behind you

[@stomperlocs1703]

Love the channel bro my wife gave me her old g35 and I can’t wait to make it a date car

[@DanielFlores-qv7rg]

one of my fans stays on and one of them doesnt turn off and it kills the battery. Its not the ac but i cant find anything about the fans do you know anything that can help?

[@sopretty43vr]

my z has had all of this in the few months i’ve had it. i don’t think he mentioned this but guys gallery gaskets and timing is the bigger issue we all will face. and if you have a g37 apparently your slave cylinder or whatever it’s called for the clutch is stupidly inside the transmission. people relocate the slave outside the transmission when doing their first job on it usually but it would suck to have to pull your trans for that one part when the trans is okay

[@moezet3286]

Appreciate I think I gotta change camshaft sensor cause I got problems same as u describe

[@Tommikegetitright101i]

I love G35 content that’s more like it keep it OG 💯

[@BeDistinct]

More to come!

[@marshallk23]

Just about everything here ive had the same issues😂 valve covers the only issue i havent had so far(not to say the owner b4 me didnt replace) but id like to add in the locks on the doors😂 my passenger side is out and my driverside only works sometimes lol

[@dakuxtcg]

so for the arms you can replace both bushings?

[@bryanviera4342]

where do y’all get y’all get your sensors from i could use some help on that

[@diegomellin6086]

Any tips for what to do. My g is lowered and haz no fender liners which makes water go into the headlights what do you recomend putring there as a replacement for the fender liner

[@BeDistinct]

I mean that’s what the fender liner is for to protect all of that, but I feel you because mine always ripped too so I just leave mine out as well. I only drove my G in dry weather though, if it rains, I don’t take it out.

[@NWOutdoors2017]

I'm really curious about your intake, any issues? Real gains? Thanks!

[@LoadedLando]

Just got a 35 coupe these are the first things ima do to it 😭😭

[@sproles88]

Do you think this video still applies for the g37?

[@ShadowNoCap]

100k subs congrats u are the best help

[@xdvblack7947]

Dont forget about the doors. The part that keeps it open- seems non existent 😅

[@JG-nw3ub]

Pretty spot on

[@timothycook2711]

Every one of these that I’ve seen, nobody has mentioned the radiator/transmission oil cooler. It is one of the biggest problems with g35 and 350z models transmission cooler gets coolant leaking into the transmission and fry’s the transmission. He isn’t wrong on what he has said but that’s the biggest issue

[@adriangarcia2703]

All the camshaft sensors are the same right? It doesn’t matter where they go?

[@Agilepickleunite]

Nooooo

[@Agilepickleunite]

I know this is 5 months old but one side is angled one side is straight connect them to the connector to make sure they connect before you put them in. Also I’ve never tried it but I don’t think they will bolt in either

[@stillthebody-movethemind6346]

You forgot the Rear Diff bushing my guy haha. Those things are ALWAYS blown.

[@BeDistinct]

Haha maybe I’ll do a part 2 but yea I replaced mine as well. Maybe cuz the other things tended to go more often but I might make a part 2. I have other things on the list

[@nami6257]

Damn I think my camshaft sensors gave up and thought my engine seized up. Just bought a whole new engine too. Damnit

[@alias6811]

Mine has all of these problems and then some :/ Just bought it too SMH 05 @130K miles. Atleast she looks good tho 😢

[@raul0685]

Yup I change on both sides lower control arms inner outer tide rods ball joints right ,window regulator ,head gasket ,alternator and gas sensor

[@cedricalexander9274]

Where u get that chrome cover from

[@stevengonzalez2623]

Damn, those door cards tho! Where can I order that???

[@adonaiheylel1327]

I just had to get a new flex pipe and lower control arm. I wanna cry. And I need new tires soon lmao 😂

[@sykesclips]

door handle for my g35 and my right window don’t work, bushings, and now valve covers smh

[@jerryedwards6777]

i have a 2007 nissan 350z and i can def say DO NOT BUY THE CHEAP CAM AND CRANK SENSORS!!! there is a magnet in them and in the cheap ones the magnet is extremely weak and your car wont start i know from experience i was trying to see if the brand mattered and it def does buy reputable brand sensors or your ecu will freak out

[@GIOVANNITH3G35FAN]

Oem sensors especially for those it's not worth it buying eBay crap

[@BeDistinct]

I've heard similar things, but I have bought my camshaft sensors from car parts . com every single time, for my auto G35 and my my current manual one and I have never had any issues with them and the car runs perfectly fine. I can vouch for Carparts.com but not any other third party.

[@romnickcanono]

yup either replaced or upgraded all of those or working on to replace them every single one 😂

[@marklengal9990]

Do you have a link for the cam sensors?

[@BeDistinct]

www.carparts.com/details/Infiniti/G35/Replacement/2003-2007/SET-REPN311602-2.html?TID=gglpla&origin=pla_with_promotion&gclid=CjwKCAiAoL6eBhA3EiwAXDom5j_ZLYAnf7vtiUsDr8rS23e88sMoIcJZKkKG2zjkz8uEG7aGBTtzQhoCCdwQAvD_BwE&gclsrc=aw.ds order 2 of these if you have a Rev up

[@woobackwilly2938]

Mine recently had code p1757 (front solenoid valve) I just finished up fixing it up it was a big hassle

[@BeDistinct]

Dang! I had mine go bad too haha

[@starboywasian]

hello, i just got a 04 g35 coupe 160km on it.. the weather out here in canada is like -25 - -35 and the car hasn’t given me any problems on start ups until today. I was out with my buddies last night, realized my dash was pretty dim and headlights as well.. figured just needed a new battery, my windows also were really slow rolling down and up, i get home park the car wake up next morning go to start the car and i get no crank, i get a solid one click :( i bought a new starter but don’t want to replace it without checking any other solutions first, if anyone has had the same experience what was your solution? take care thank you

[@fyb3x890]

If the check engine light is on, get dat checked out b4 u start replacing things

[@Sinfullzz]

It’s ur starter bro I had same issue I replaced battery twice thinking it was battery first time was second time was starter if it clicks no crank it’s ur starter. I had probs takin those 2 bolts out had to use a bolt extractor helped a lot Goodluck bro it’s easy asf to replace but the bolts if they rusted Goodluck🤣

[@lilsilvia]

lol wheel bearings too, my driver side rear wheel bearing is crying rn

[@brookesmith1562]

had a lesson from the valve cover mine was leaking and i ended up blowing my engine

[@Sam-mw5hx]

This video is so accurate

[@si06civic86]

You ain’t lying about those sensors haha

[@clownfn9308]

I bought my g for 2k just cuz it had a bad cam shaft sensor an the kid didn’t know how to fix it😮‍💨

[@wavvyza]

I’ve been hearing this weird humming sound any ideas?

[@kingkb136]

I just replaced my spark plugs yesterday

[@BeDistinct]

Have any of these 5 things gone bad for you guys?

[@jorgesalgado5389]

Oh yeah 2nd owner to a 05 Sedan Rev up, the original owner left me some work. I had clunking and squeaking in my front suspension. After replacing the UC,LC, Tie Rods, Lower Ballpoint. All noises went away I'm going to be replacing the valve covers soon with the addition of gaskets, coil packs, spark plugs as well as Z1 silicone PCV hoses. After all that at some point I have to refresh the rear suspension.

[@daddydavito7301]

I’m glad that not even a full 24 hours after you post this video my camshaft sensors decided they wanted to meet god

[@BeDistinct]

Lmao 🤣

[@Jaybomb1721]

I hate the bushings

[@asianyangster916]

How did the car sound like when the cam sensor was bad? lol

[@gkada8016]

Facts

[@datboigavo6715]

I just got a g35 with 125k miles

[@Mrvides99]

I just replaced my camshaft today 😂

[@ashe1928]

my catalyic covertor rattles ..

[@rudyadan6113]

New y pipe it issss

[@ashe1928]

@@rudyadan6113 huh?

[@louisvillanueva7990]

definitely them window regulators 🤣

[@BeDistinct]

oh 100% haha

[@nhayling]

what is that clapped ass makeshift door panel?

[@BeDistinct]

What other things have gone bad for you guys?

[@Tommikegetitright101i]

I swear to god the funny thing is today on my 350z my driver side door handle stoped working 💀

[@lashmobb_icy]

fuel level sensor circuit a, have replaced my fuel pump and sending unit but still no luck. I heard its a problem with the cluster.

[@Agilepickleunite]

@@lashmobb_icyI had to buy a new harness for the body and that fixed it for me these wiring harnesses are old and they cross talk sometimes on the weaker 5 volt circuits

[@Agilepickleunite]

Whole wiring harness for the engine and transmission so many fucked up broken wires

[@davemiller3349]

Anyone else have the self moving seats? Or the trunk release button not working?

[@Agilepickleunite]

Ooooooh self moving seats comes from moisture did you spill a drink on the controls if not get some alcohol disconnect your battery hit your brakes a few times and just clean the fuck out of the switches with alcohol

[@Cruzshamir]

My car fits all of the above issues lmao

[@BeDistinct]

Damn son, time to start fixing it haha

[@Cruzshamir]

@@BeDistinct lol I’m trying dawgy. 😄

[@gofigure4875]

On the side of the road....RIGHT NOW!

[@herv5300]

It's all normal stuff Nissan

[@gl4zyy]

YOO

[@BeDistinct]

YOOOOOOO

[@KekFromJapan]

First

[@monkeypuncher8958]

Daddy?

[@BeDistinct]

Yesss.... haha